From: Akihiro Tsukada <tsk...@gmail.com>
As described in Document/timers/timers-howto.txt,
hrtimer-based delay should be used for small sleeps.
Signed-off-by: Akihiro Tsukada <tsk...@gmail.com>
---
drivers/media/pci/pt1/pt1.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c
index 1a83a624776..4f84672974d 100644
--- a/drivers/media/pci/pt1/pt1.c
+++ b/drivers/media/pci/pt1/pt1.c
@@ -18,7 +18,10 @@
*/
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/sched/signal.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
@@ -327,7 +330,7 @@ static int pt1_unlock(struct pt1 *pt1)
for (i = 0; i < 3; i++) {
if (pt1_read_reg(pt1, 0) & 0x80000000)
return 0;
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not unlock\n");
return -EIO;
@@ -341,7 +344,7 @@ static int pt1_reset_pci(struct pt1 *pt1)
for (i = 0; i < 10; i++) {
if (pt1_read_reg(pt1, 0) & 0x00000001)
return 0;
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not reset PCI\n");
return -EIO;
@@ -355,7 +358,7 @@ static int pt1_reset_ram(struct pt1 *pt1)
for (i = 0; i < 10; i++) {
if (pt1_read_reg(pt1, 0) & 0x00000002)
return 0;
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not reset RAM\n");
return -EIO;
@@ -372,7 +375,7 @@ static int pt1_do_enable_ram(struct pt1 *pt1)
if ((pt1_read_reg(pt1, 0) & 0x00000004) != status)
return 0;
}
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not enable RAM\n");
return -EIO;
@@ -382,7 +385,7 @@ static int pt1_enable_ram(struct pt1 *pt1)
{
int i, ret;
int phase;
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
phase = pt1->pdev->device == 0x211a ? 128 : 166;
for (i = 0; i < phase; i++) {
ret = pt1_do_enable_ram(pt1);
@@ -469,6 +472,9 @@ static int pt1_thread(void *data)
struct pt1_buffer_page *page;
bool was_frozen;
+#define PT1_FETCH_DELAY 10
+#define PT1_FETCH_DELAY_DELTA 2
+
pt1 = data;
set_freezable();
@@ -482,7 +488,13 @@ static int pt1_thread(void *data)
page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page;
if (!pt1_filter(pt1, page)) {
- schedule_timeout_interruptible((HZ + 999) / 1000);
+ ktime_t delay;
+
+ delay = PT1_FETCH_DELAY * NSEC_PER_MSEC;
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_hrtimeout_range(&delay,
+ PT1_FETCH_DELAY_DELTA * NSEC_PER_MSEC,
+ HRTIMER_MODE_REL);
continue;
}
@@ -718,7 +730,7 @@ pt1_update_power(struct pt1 *pt1)
adap = pt1->adaps[i];
switch (adap->voltage) {
case SEC_VOLTAGE_13: /* actually 11V */
- bits |= 1 << 1;
+ bits |= 1 << 2;
break;
case SEC_VOLTAGE_18: /* actually 15V */
bits |= 1 << 1 | 1 << 2;
@@ -772,7 +784,7 @@ static int pt1_wakeup(struct dvb_frontend *fe)
adap = container_of(fe->dvb, struct pt1_adapter, adap);
adap->sleep = 0;
pt1_update_power(adap->pt1);
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
ret = config_demod(adap->demod_i2c_client, adap->pt1->fe_clk);
if (ret == 0 && adap->orig_init)
@@ -1079,7 +1091,7 @@ static int pt1_i2c_end(struct pt1 *pt1, int addr)
do {
if (signal_pending(current))
return -EINTR;
- schedule_timeout_interruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
} while (pt1_read_reg(pt1, 0) & 0x00000080);
return 0;
}
@@ -1382,11 +1394,11 @@ static int pt1_probe(struct pci_dev *pdev, const struct
pci_device_id *ent)
pt1->power = 1;
pt1_update_power(pt1);
- schedule_timeout_uninterruptible((HZ + 49) / 50);
+ msleep(20);
pt1->reset = 0;
pt1_update_power(pt1);
- schedule_timeout_uninterruptible((HZ + 999) / 1000);
+ usleep_range(1000, 2000);
ret = pt1_init_frontends(pt1);
if (ret < 0)
--
2.16.3
