; Enviado el: jueves, 15 de enero de 2009 16:44
> Para: Catimimi
> CC: linux-...@linuxtv.org; Linux-media
> Asunto: Re: [linux-dvb] Pinnacle dual Hybrid pro PCI-express - linuxTV!
>
> On Wed, Jan 14, 2009 at 10:28 AM, Catimimi wrote:
>> try without the ".ko", i.e. i
do el: jueves, 15 de enero de 2009 16:44
> Para: Catimimi
> CC: linux-...@linuxtv.org; Linux-media
> Asunto: Re: [linux-dvb] Pinnacle dual Hybrid pro PCI-express - linuxTV!
>
> On Wed, Jan 14, 2009 at 10:28 AM, Catimimi wrote:
>> try without the ".ko", i.e. instead,
v.org [mailto:linux-dvb-boun...@linuxtv.org] En
nombre de Luca Tettamanti
Enviado el: jueves, 15 de enero de 2009 16:44
Para: Catimimi
CC: linux-...@linuxtv.org; Linux-media
Asunto: Re: [linux-dvb] Pinnacle dual Hybrid pro PCI-express - linuxTV!
On Wed, Jan 14, 2009 at 10:28 AM, Catimimi wrote:
> try wit
Catimimi wrote:
> CityK a écrit :
>> Could you put it in the wiki if its not already contained there. Thanks.
>>
> It was done yesterday.
Yep, saw that about 10 minutes later after I responded to this message
:P . Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-med
On Thu, Jan 15, 2009 at 5:10 PM, Catimimi wrote:
> Luca Tettamanti a écrit :
> > Of course ;-) The PCI ID of the card is not listed. I happen to have
> > the same card, you can add the ID to the list but note that the
> > frontend is not there yet... so the module will load, will print some
> > so
On Wed, Jan 14, 2009 at 10:28 AM, Catimimi wrote:
> try without the ".ko", i.e. instead, use:
>
> modprobe saa716x_hybrid
>
> OK, shame on me, it works but nothing happens.
Of course ;-) The PCI ID of the card is not listed. I happen to have
the same card, you can add the ID to the list but note
Catimimi wrote:
> Hi,
>
> As I didn't yet subscribe to the list, I reply directly to your
> discussion with Romain
sorry, I don't recall it offhand.
> in ordezr to send you the result of :
>
> lspci -vvxxx
>
> for the Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)
>
> __
>
