>
> It's not about whether there is enough bandwidth, it's about whether
> issuing more usb urbs would overflow the bandwidth allocated to other
> devices (whether in use or not). Make sure you have
> CONFIG_USB_EHCI_TT_NEWSCHED defined in your kernel.
>
This did the trick!!. After enabling this a
On Mon, Aug 05, 2013 at 11:57:58PM +0100, Rajil Saraswat wrote:
> >
> > Why are you doing this?
> >
> > -snip-
>
> My initial guess was that X was claiming over the ir device, so I
> wanted to disable ir device as an input device.
X may open the input device, but that does not affect IR transmiss
On Mon, Aug 05, 2013 at 07:17:10PM +0100, Rajil Saraswat wrote:
> Please find attached two traces.
> - X.txt from inside an X session where irsend doesnt trigger ir led.
> -noX.txt from virtual console with X stopped. irsend triggers the ir led.
>
> Also, i have made sure input for this device is
>
> I have the exact same device and it works fine with 3.10.4 vanilla,
> whether X is running out or not. Please can you send the output of
> usbmon while issuing irsend (just the interface with the mce device).
>
>
> Thanks
> Sean
Please find attached two traces.
- X.txt from inside an X session
On Sun, Aug 04, 2013 at 01:56:49PM +0100, Rajil Saraswat wrote:
> Hi,
>
> I have a HP MCE ir transreceiver which is recognised as Fintek device.
> The receiver works fine, however the transmitter only works when there
> is no X session running.
>
>
> When X is stopped and the following command i
Hi,
I have a HP MCE ir transreceiver which is recognised as Fintek device.
The receiver works fine, however the transmitter only works when there
is no X session running.
When X is stopped and the following command is issued from the virtual
console (tty1), then the transmitter works:
irsend SE