Hi Laurent,
Laurent Pinchart wrote on 2013-06-22:
If I use omap3isp-live to capture a stream on my beagleboard, the
first time I start the app, the picture has always a green taint.
The second time I start the app, the picture is good. As the camera
is reset by a gpio upon device open,
Hi Laurent,
Laurent Pinchart wrote on 2013-06-18:
If I use omap3isp-live to capture a stream on my beagleboard, the first
time I start the app, the picture has always a green taint. The second
time I start the app, the picture is good. As the camera is reset by a
gpio upon device open,
Hi Florian,
On Friday 21 June 2013 15:23:53 Florian Neuhaus wrote:
Laurent Pinchart wrote on 2013-06-18:
If I use omap3isp-live to capture a stream on my beagleboard, the first
time I start the app, the picture has always a green taint. The second
time I start the app, the picture is good.
Hi Florian,
On Tuesday 11 June 2013 10:01:31 Florian Neuhaus wrote:
Hi Andrei,
Your post helped me a lot!
My environment:
beagleboard-xm
mt9p031 @96Mhz (adapted power-supply)
linux-omap 3.7.10
omap3isp-live
I have two similiar issues with the mt9p031, that has probably the same
Hi Andrei,
Your post helped me a lot!
My environment:
beagleboard-xm
mt9p031 @96Mhz (adapted power-supply)
linux-omap 3.7.10
omap3isp-live
I have two similiar issues with the mt9p031, that has probably the same cause:
If I use omap3isp-live to capture a stream on my beagleboard, the first time
Hi, Chris,
No, I didn't try this, but I'll try. Also I was thinking that this issue
appears because
the bus width is not 12 bits as needed by the datasheet, but 10 bits (as
it is limited
by the hardware) so I was thinking that it may cause this issue to appear.
Regards,
Andrei
On 05/16/2013
Hi, Guennadi,
On 05/16/2013 10:46 PM, Guennadi Liakhovetski wrote:
On Thu, 16 May 2013, Andrei Andreyanau wrote:
Hi, Laurent,
I have an issue with the mt9p031 camera. The kernel version I use
uses soc camera framework as well as camera does. And I have
the following thing which appears
Hi, Laurent,
I have an issue with the mt9p031 camera. The kernel version I use
uses soc camera framework as well as camera does. And I have
the following thing which appears randomly while capturing the
image using gstreamer. When I start the capture for the first time, it
shows the correct image
On Thu, 16 May 2013, Andrei Andreyanau wrote:
Hi, Laurent,
I have an issue with the mt9p031 camera. The kernel version I use
uses soc camera framework as well as camera does. And I have
the following thing which appears randomly while capturing the
image using gstreamer. When I start the
