Ok, many thanks.
I used this guide:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
and Ubuntu 14.04.1 LTS with kernel version 3.13.0-44.generic.
I'm not afraid using the terminal if you want to help me :-)
Regards
Francesco
2015-01-15 2:27
Hi Roberto,
It doesn't record anything, the file is blank (0 bytes) :-(
$ dd if=/dev/dvb/adapter0/dvr0 of=test.ts
0+0 records in
0+0 records out
0 bytes (0 B) copied, 13,4642 s, 0,0 kB/s
Francesco
2015-01-14 16:58 GMT+01:00 Roberto Alcântara robe...@eletronica.org:
Francesco,
Seems very
Francesco,
Seems very strange not work once you have lock (1f) and ber 0. not a
real problem signal report.
After tzap -r open another console and:
dd if=/dev/dvb/adapter0/dvr0 of=test.ts
Wait 10 seconds and stop it. Please check file size (try to open on
vlc too if big enough...).
Cheers,
-
Is there a gentleman that can help me with my problem? On linuxtv.org
they said that someone here sure will help me.
I submitted the problem here:
http://www.spinics.net/lists/linux-media/msg85432.html
Regards
Francesco
--
To unsubscribe from this list: send the line unsubscribe linux-media in
Hi Roberto, thanks for your fast reply.
I'm from Italy, a DVB-T region. With Windows the device works fine, it
receives all the channels from multiplexes.
I don't know if my device has the SMS2270 chip, I know the ID,
187f:0600, and the link on the Terratec site:
Hi Francesco,
You are using Siano SMS2270, am I right?
My guess you're using ISDB-T firmware to program your ic, but are you
in ISDB-T region? I use same firmware name here and works fine
(Brazil) and it seems loaded ok on your log.
I never saw an DVB firmware available to sms2270. Your tuner
Good to know about DVB on this chip. This is sms2270 id :-)
I think you can get more information from module debug messages.
Try
options smsusb debug=3
on /etc/modprobe.d.
Then reload it and try to tzap one of channels found by scan to look
for some lock. You will have more debug
Sorry for the previous message, maybe it isn't readable!
I created a file named frequency with this content:
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 69800 8MHz AUTO AUTO AUTO AUTO AUTO AUTO # Mediaset 4
but
I used another working-device for creating the channels.conf file with
this command:
scan frequency ~/.tzap/channels.conf
For example this is a line from that file:
