On Tue, Aug 27, 2013 at 8:04 AM, Jaehoon Chung jh80.ch...@samsung.com wrote:
Dear Yuvaraj,
On 08/26/2013 06:20 PM, Yuvaraj Kumar wrote:
On Fri, Aug 23, 2013 at 7:14 PM, Jaehoon Chung jh80.ch...@samsung.com
wrote:
Hi Yuvaraj,
On 08/23/2013 08:15 PM, Yuvaraj Kumar C D wrote:
Currently
--- Original Message ---
Sender : Doug Andersondiand...@google.com
Date : Aug 24, 2013 09:18 (GMT+05:30)
Title : Re: [PATCH V3] ARM: dts: Add dwmmc DT nodes for exynos5420 SOC
Yuvaraj,
On Thu, Aug 22, 2013 at 11:25 PM, Yuvaraj Cd wrote:
b.card-detect-delay
2013/8/23 Christian Gmeiner christian.gmei...@gmail.com:
Hi Prasanna.
What was the previous command sent before CMD13 when timeout happened?
Can you share some 5 seconds log before the Timeout start happening?
As the log got quite big I have uploaded it.
http://dpaste.dzfl.pl/a2b30bc5
Hi Georgi,
I found the sdhci_msm_vreg_reset(). Why do you run enable-disable?
+/*
+ * Reset vreg by ensuring it is off during probe. A call
+ * to enable vreg is needed to balance disable vreg
+ */
+static int sdhci_msm_vreg_reset(struct sdhci_msm_pltfm_data *pdata)
I think that controller
Hi,
Another test with 3.4.59 with EXT4 and:
tune2fs -o journal_data_ordered -e panic (partition)
results in kernel panic:
[...]
Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDXC card at address
On Tue, Aug 27, 2013 at 05:47:22PM -0400, Kevyn-Alexandre Paré wrote:
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
This looks like a hardware problem; either with the MMC reader,
Hi Yuvaraj
On Fri, Aug 23, 2013 at 4:45 PM, Yuvaraj Kumar C D yuvaraj...@gmail.com wrote:
changes from V1:
1.Added a new RFC patch
mmc: dw_mmc: socfpga: move socfpga private init
2.Avoid code duplication in
mmc: dw_mmc: exynos: add a quirk for
