Re: [PATCH v2] mmc: atmel-mci: adopt pinctrl support

On 7 November 2014 01:48, Wenyou Yang wenyou.y...@atmel.com wrote: Amend the atmel mci pin controller to optionally take a pin control handle and set the state of the pins to: - default on boot, resume and before performing an transfer. - sleep on suspend(). This should make it possible to

Re: [PATCH v4 00/10] ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver

On 8 November 2014 15:33, Andreas Fenkart afenk...@gmail.com wrote: v4: - rework patch descriptions - dropped patch removing unused defines in mach-omap2/mmc.h - rebase 3.18.0-rc3 - compile test omap1 and omap2 compile tested OMAP1: CONFIG_MACH_OMAP_INNOVATOR=y CONFIG_MACH_OMAP_H2=y

Re: [PATCH 2/2] mmc: core: reset sdio card properly on resume.

On 8 November 2014 01:14, NeilBrown ne...@suse.de wrote: mmc_sdio_power_restore calls mmc_send_if_cond(host, host-ocr_avail); ret = mmc_send_io_op_cond(host, 0, NULL); between mmc_go_idle() and mmc_sdio_init_card(). mmc_sdio_resume needs to as well, else my libertas sdio

[PATCH v4] mmc: add Toshiba PCI SD controller driver

This patch resurrects an old never-finished driver for Toshiba PCI SD controllers found in some older Toshiba laptops (such as Portege R100): 02:0d.0 System peripheral [0880]: Toshiba America Info Systems SD TypA Controller [1179:0805] (rev 05) The code is fixed, cleaned up and successfully

[PATCH 1/3] mmc: Support FFU for eMMC v5.0

Add eMMC5.0 ffu ext_csd fields Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com Signed-off-by: Alex Lemberg alex.lemb...@sandisk.com diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1eda8dd..3b86ed3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c

[PATCH 0/3] mmc: Support FFU for eMMC v5.0

he Field Firmware Update (FFU) feature is new for eMMC 5.0 spec (Jedec: JESD84-B50.pdf) http://www.jedec.org/standards-documents/technology-focus-areas/flash- memory-ssds-ufs-emmc/e-mmc *New ioctl has been add: * [Alex Lemberg] MMC_FFU_INVOKE - transfer the new Firmware data from user

[no subject]

Subject: [PATCH 3/3] v1] mmc: Support FFU for eMMC v5.0 Add support of FFU for eMMC v5.0 Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com --- v1: remove unnecesary slash's diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 5562308..19ba729 100644 ---

[PATCH 2/3] mmc: Support FFU for eMMC v5.0

eMMC5.0 FFU is using some of pre-existing mmc_test.c functionality. In order to prevent code duplication, some code of mmc_test.c was moved to core.c and modified. Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com Signed-off-by: Alex Lemberg alex.lemb...@sandisk.com diff --git

[PATCH 3/3] mmc: Support FFU for eMMC v5.0

Add support of FFU for eMMC v5.0 Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 5562308..19ba729 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -68,3 +68,11 @@ config MMC_TEST

Re: [PATCH] mmc: wmt-sdmmc: fix unmatched release_mem_region

On 11/10/2014 06:15 AM, Alexey Charkov wrote: 2014-11-10 1:18 GMT+03:00 lautriv laut...@coldplug.net: On 11/09/2014 10:55 PM, Fabio Estevam wrote: On Sun, Nov 9, 2014 at 7:12 PM, Alexey Charkov alch...@gmail.com wrote: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if

Re: [PATCH 2/2] mmc: core: reset sdio card properly on resume.

On Mon, 10 Nov 2014 14:29:19 +0100 Ulf Hansson ulf.hans...@linaro.org wrote: On 8 November 2014 01:14, NeilBrown ne...@suse.de wrote: mmc_sdio_power_restore calls mmc_send_if_cond(host, host-ocr_avail); ret = mmc_send_io_op_cond(host, 0, NULL); between mmc_go_idle()

Re: [PATCH 1/3] mmc: Support FFU for eMMC v5.0

Hi, how did you make the patch? This patch didn't apply at Ulf's repository. On 11/11/2014 02:13 AM, Avi Shchislowski wrote: Add eMMC5.0 ffu ext_csd fields Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com Signed-off-by: Alex Lemberg alex.lemb...@sandisk.com diff --git

Re: [PATCH 2/3] mmc: Support FFU for eMMC v5.0

Hi, On 11/11/2014 02:18 AM, Avi Shchislowski wrote: eMMC5.0 FFU is using some of pre-existing mmc_test.c functionality. In order to prevent code duplication, some code of mmc_test.c was moved to core.c and modified. Signed-off-by: Avi Shchislowski avi.shchislow...@sandisk.com

Re: [PATCH 0/3] mmc: Support FFU for eMMC v5.0

Hi, Subjects of Patch[1/3~3/3] are same, it can be confused. Best Regards, Jaehoon Chung On 11/11/2014 02:13 AM, Avi Shchislowski wrote: he Field Firmware Update (FFU) feature is new for eMMC 5.0 spec (Jedec: JESD84-B50.pdf)

[PATCH] mmc: dw_mmc: try pick the exact same voltage as vmmc for vqmmc

SD2.0 cards need vqmmc and vmmc to be the same. But vqmmc call regulator_set_voltage to set min_uv(2.7v) as far as possible. So if we set vmmc 3.3V in dt table, we will get error information as follows: [ 17.785398] mmc_host mmc1: Bus speed (slot 0) = 5000Hz (slot req 5000Hz, actual

[PATCH/RFC] mmc: sh_mmcif: Increase MMCIF clock rate to 97.5MHz

From: Shinobu Uehara shinobu.uehara...@renesas.com Signed-off-by: Shinobu Uehara shinobu.uehara...@renesas.com Signed-off-by: Yoshihiro Kaneko ykaneko0...@gmail.com --- This patch is based on mmc-next branch of Chris Ball's mmc tree. drivers/mmc/host/sh_mmcif.c | 14 ++ 1 file