vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon.
However after
"ARM: dts: : add minimal l4 bus layout with control module
support"
vsel_reg and enable_reg started to have the absolute address because
of address translation that happens due to p
Use "ti,pbias-dra7" compatible string which is specifically added
for DRA7 SoCs.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Tony Lindgren
---
arch/arm/boot/dts/dra7.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/d
Use "ti,pbias-omap2" compatible string which is specifically added
for OMAP2.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Tony Lindgren
---
arch/arm/boot/dts/omap2430.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/
Add separate compatible strings for every platform and populate the
pbias register offset in the driver data.
This helps avoid depending on the dt for pbias register offset.
Also update the dt binding documentation for the new compatible
strings.
Suggested-by: Tony Lindgren
Signed-off-by: Kishon
Use "ti,pbias-omap3" compatible string which is specifically added
for OMAP3.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Tony Lindgren
---
arch/arm/boot/dts/omap3.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/om
Use "ti,pbias-omap5" compatible string which is specifically added
for OMAP5.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Tony Lindgren
---
arch/arm/boot/dts/omap5.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/om
Use "ti,pbias-omap4" compatible string which is specifically added
for OMAP4.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Tony Lindgren
---
arch/arm/boot/dts/omap4.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/om
[resending text-only]
On Wed, Sep 2, 2015 at 3:07 PM, Grant Grundler wrote:
>
>
> On Wed, Sep 2, 2015 at 11:28 AM, Olof Johansson wrote:
> ...
>> > +/**
>> > + * struct mmc_ioc_combo_cmd - combo command information
>> > + * @num_of_cmds: number of commands to send
>> > + * @mmc_ioc_cmd_list: poi
Hi,
On Wed, Sep 2, 2015 at 7:21 AM, Jon Hunter wrote:
> From: Seshagiri Holi
>
> Certain eMMC devices allow vendor specific device information to be read
> via a sequence of vendor commands. These vendor commands must be issued
> in sequence and an atomic fashion. One way to support this would b
On Wed, Sep 02, 2015 at 04:17:28PM +0530, Kishon Vijay Abraham I wrote:
> Add separate compatible strings for every platform and populate the
> pbias register offset in the driver data.
> This helps avoid depending on the dt for pbias register offset.
Can you respin with Tony's comment please and
Hello dear developers!
Please advise how to resolve issue with SD card driver.
I work on adaptation of Voipac i.MX51 board for linux-4.2.0. Generally,
this is the creation of suitable Device-tree file.
..
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width
Ulf,
On Wed, Sep 2, 2015 at 4:38 AM, Ulf Hansson wrote:
>> +/**
>> + * mmc_regulator_set_vqmmc - Set VQMMC as per the ios
>> + *
>> + * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible.
>
> Looking at the code, I don't think this statement is entirely true.
> Isn't it so t
* Kishon Vijay Abraham I [150902 03:51]:
> --- a/drivers/regulator/pbias-regulator.c
> +++ b/drivers/regulator/pbias-regulator.c
How about add a comment here:
/* Offset from SCM general area (and syscon) base */
> +static const struct pbias_of_data pbias_of_data_omap2 = {
> + .offset = 0x
On Wednesday 02 September 2015 08:37 PM, Joe Perches wrote:
On Wed, 2015-09-02 at 18:37 +0530, Vaibhav Hiremath wrote:
On Wednesday 02 September 2015 02:07 AM, Joe Perches wrote:
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
Return value would give clear information about the ac
On Wed, 2015-09-02 at 18:37 +0530, Vaibhav Hiremath wrote:
> On Wednesday 02 September 2015 02:07 AM, Joe Perches wrote:
> > On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
> >> Return value would give clear information about the actual root-cause
> >> of the failure.
> >> diff --git a/d
On Wednesday 02 September 2015 07:21 PM, Shawn Lin wrote:
On 2015/9/2 3:32, Vaibhav Hiremath wrote:
In case PXA1928 family of devices, there is device/controller specific
configuration to control voltage/power on the IO pins.
This patch implements and enables the sdhci_ops->voltage_switch()
c
From: Seshagiri Holi
Certain eMMC devices allow vendor specific device information to be read
via a sequence of vendor commands. These vendor commands must be issued
in sequence and an atomic fashion. One way to support this would be to
add an ioctl function for sending a sequence of commands to
On 2015/9/2 3:32, Vaibhav Hiremath wrote:
In case PXA1928 family of devices, there is device/controller specific
configuration to control voltage/power on the IO pins.
This patch implements and enables the sdhci_ops->voltage_switch()
callback api.
Note that IO pad register addresses are fetched
On Wednesday 02 September 2015 02:07 AM, Joe Perches wrote:
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
Return value would give clear information about the actual root-cause
of the failure.
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
@@ -455,7 +4
On Wednesday 02 September 2015 02:01 AM, Joe Perches wrote:
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
There were some coding style issues where spaces have been used instead
of tabs, for example, in macro definitions, alignment of function
declarations/definitions, etc...
Thi
On 27 August 2015 at 11:29, Yangbo Lu wrote:
> Freescale QorIQ SOCs have the SVR(System version register) containing
> the system version number for the device. Sometimes the eSDHC driver
> needs to know this information for some errata workaround. So, we read
> SVR from the global utilities block
On Wednesday 02 September 2015 01:56 PM, Jisheng Zhang wrote:
On Wed, 2 Sep 2015 13:49:53 +0530
Vaibhav Hiremath wrote:
On Wednesday 02 September 2015 12:34 PM, Jisheng Zhang wrote:
On Wed, 2 Sep 2015 01:02:17 +0530
Vaibhav Hiremath wrote:
Currently, the sdhci_do_start_signal_voltage_s
On 31 August 2015 at 20:24, Heiko Stuebner wrote:
> From: Douglas Anderson
>
> This adds logic to the MMC core to set VQMMC. This is expected to be
> called by MMC drivers like dw_mmc as part of (or instead of) their
> start_signal_voltage_switch() callback.
>
> A few notes:
>
> * When setting t
Use "ti,pbias-dra7" compatible string which is specifically added
for DRA7 SoCs.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/dra7.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1e29ccf..d
Use "ti,pbias-omap2" compatible string which is specifically added
for OMAP2.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/omap2430.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 2
Use "ti,pbias-omap3" compatible string which is specifically added
for OMAP3.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/omap3.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 69a40cf..9
Add separate compatible strings for every platform and populate the
pbias register offset in the driver data.
This helps avoid depending on the dt for pbias register offset.
Also update the dt binding documentation with the new compatible
strings.
Suggested-by: Tony Lindgren
Signed-off-by: Kisho
Use "ti,pbias-omap4" compatible string which is specifically added
for OMAP4.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/omap4.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index abc4473..5
Use "ti,pbias-omap5" compatible string which is specifically added
for OMAP5.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/omap5.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b1a1263..7
vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon.
However after
"ARM: dts: : add minimal l4 bus layout with control module
support"
vsel_reg and enable_reg started to have the absolute address because
of address translation that happens due to p
On Wed, 2 Sep 2015 13:49:53 +0530
Vaibhav Hiremath wrote:
>
>
> On Wednesday 02 September 2015 12:34 PM, Jisheng Zhang wrote:
> > On Wed, 2 Sep 2015 01:02:17 +0530
> > Vaibhav Hiremath wrote:
> >
> >> Currently, the sdhci_do_start_signal_voltage_switch() function invokes
> >> controller specif
On Wednesday 02 September 2015 12:34 PM, Jisheng Zhang wrote:
On Wed, 2 Sep 2015 01:02:17 +0530
Vaibhav Hiremath wrote:
Currently, the sdhci_do_start_signal_voltage_switch() function invokes
controller specific voltage switch configuration only for 1.8v usecase;
but it is required for others
Hi Jaehoon,
Am Mittwoch, 2. September 2015, 14:01:52 schrieb Jaehoon Chung:
> Hi, Heiko.
>
> On 09/01/2015 03:24 AM, Heiko Stuebner wrote:
> > From: Alexandru M Stan
> >
> > Add ciu_drv, ciu_sample clocks and default-sample-phase. This will later
> > be used by tuning code.
>
> As i know, ciu_
On Wednesday 02 September 2015 12:24 PM, Jisheng Zhang wrote:
On Wed, 2 Sep 2015 00:54:13 +0530
Vaibhav Hiremath wrote:
There were some coding style issues where spaces have been used instead
of tabs, for example, in macro definitions, alignment of function
declarations/definitions, etc...
On Wed, 2 Sep 2015 01:02:17 +0530
Vaibhav Hiremath wrote:
> Currently, the sdhci_do_start_signal_voltage_switch() function invokes
> controller specific voltage switch configuration only for 1.8v usecase;
> but it is required for others as well.
>
> For example, in case of PXA1928 SDH controller
35 matches
Mail list logo