On 05/09/15 09:49, Michele Curti wrote:
> Add an entry to the sdhci_acpi_uids list to detect the SD card
> reader on the Asus X205Ta laptop.
>
> dstd table:
>
> Device (SDHC)
> {
> Name (_ADR, Zero) // _ADR: Address
> Name (_HID, "PNP0FFF") // _HID: Hardware ID
> Name (_CID, "PNP0D
On 2015/9/6 22:51, Yousong Zhou wrote:
all of this is under control of the mmc core.
So if Yongsong does want this card to work for any linux-based mmc stack,
I
guess something like that should be "better"?
if (switch to HS fail) {
set_bus_clk
goto retry switch to HS
}
BUT..
On Thu, Sep 03, 2015 at 03:25:11PM +0530, Kishon Vijay Abraham I wrote:
> PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
> OMAP5 and DRA7 SoCs. Enable it here.
>
> Signed-off-by: Kishon Vijay Abraham I
Tested-by: Guenter Roeck
> ---
> arch/arm/configs/multi_v7_defconfig |
Hello Ulf,
2015-08-26 0:27 GMT+09:00 Ulf Hansson :
> On 23 August 2015 at 14:58, Yoshihiro Kaneko wrote:
>> From: Koji Matsuoka
>>
>> The clock should be enable when SDHI registers are accessed.
>
> Yes, correct. But...
>
>>
>> Signed-off-by: Koji Matsuoka
>> Signed-off-by: Yoshihiro Kaneko
>>
>>> all of this is under control of the mmc core.
>>> So if Yongsong does want this card to work for any linux-based mmc stack,
>>> I
>>> guess something like that should be "better"?
>>>
>>> if (switch to HS fail) {
>>> set_bus_clk
>>> goto retry switch to HS
>>> }
>>>
>>> BUT...
在 2015/9/6 20:09, Yousong Zhou 写道:
Hi,
On 6 September 2015 at 08:12, Shawn Lin wrote:
On 2015/9/5 22:58, Hans de Goede wrote:
Hi Shawn Lin,
On 05-09-15 16:07, Shawn Lin wrote:
On 2015/9/5 18:19, Yousong Zhou wrote:
A SD card with sunxi-mmc can fail with the following error message
(RCD
Hi,
On 6 September 2015 at 08:12, Shawn Lin wrote:
> On 2015/9/5 22:58, Hans de Goede wrote:
>>
>> Hi Shawn Lin,
>>
>> On 05-09-15 16:07, Shawn Lin wrote:
>>>
>>> On 2015/9/5 18:19, Yousong Zhou wrote:
A SD card with sunxi-mmc can fail with the following error message
(RCD for
On Tue, Aug 11, 2015 at 07:38:29PM +0800, Haibo Chen wrote:
> imx7d-sdb board has a eMMC5.0 on usdhc3. This eMMC support HS400.
> This patch add usdhc3 support for HS400
>
> Signed-off-by: Haibo Chen
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the