Hello Ludovic,
I have tried it with atmel-mci driver. It took me little time to change setting
of my board.
It seems to try clock down to 200kHz:
[ 5.860000] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 5.920000] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 5.980000] mmc0: mmc_rescan_try_freq: trying to init card at 205079 Hz
As I see in driver source, there is better clkdiv overrun work around.
But I don't find min and max freq definitions in this driver, it is probably
somewhere else.
So this would be OK.
Dne 20.6.2012 11:13, ludovic.desroches napsal(a):
Add mmc mailing list.
-------- Message original --------
Sujet: Re: [PATCH] mmc: at91: fix bus speed
Date : Wed, 20 Jun 2012 10:49:08 +0200
De : ludovic.desroches <ludovic.desroc...@atmel.com>
Pour : Prchal Jiří <jiri.prc...@aksignal.cz>
Copie à : <ludovic.desroc...@atmel.com>, <linux-arm-ker...@lists.infradead.org>
Hello Jiri,
Thanks for your patch but at91-mci is now deprecated and should be
removed in 3.7.
On one hand I don't know if we have to continue to take patches for this
driver, on the other hand it's a fix for some SD cards.
Le 06/20/2012 10:15 AM, Prchal Jiří a écrit :
This patch change minimum and maximum clock speed because some noname
cards doesn't work during init even at 375kHz and new cards (SD v. 3.0)
can run at 50 or 100 MHz.
Also aded clkdiv register overrun fix when setting low speeds.
Signed-off-by: Jiri Prchal <jiri.prc...@aksignal.cz>
---
--- linux/linux-3.5-rc3/drivers/mmc/host/at91_mci.c.orig 2012-06-17
02:25:17.000000000 +0200
+++ linux/linux-3.5-rc3/drivers/mmc/host/at91_mci.c 2012-06-18
11:01:49.751415984 +0200
@@ -724,6 +724,10 @@ static void at91_mci_set_ios(struct mmc_
else
clkdiv = (at91_master_clock / ios->clock) / 2;
+ /* set maximum divider */
+ if (clkdiv > 255)
+ clkdiv = 255;
+
pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
at91_master_clock / (2 * (clkdiv + 1)));
}
@@ -948,8 +952,8 @@ static int __init at91_mci_probe(struct
}
mmc->ops = &at91_mci_ops;
- mmc->f_min = 375000;
- mmc->f_max = 25000000;
+ mmc->f_min = 200000; /* not all cards can run at 375kHz */
I will check on atmel-mci if we have to decrease f_min.
+ mmc->f_max = 100000000; /* new cards can run at 100MHz */
MCI operates at a rate of up to master clock divided by two so you can't
reach 100MHz as max frequency since it means that our master clock is at
200MHz that is not the case. I would say 50MHz is the maximum frequency
for product compatible with at91-mci.
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = 0;
Regards
Ludovic
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
