us speed should be set last
> in UHS initialization
>
> FYI ...
>
> > -Original Message-
> > From: Subhash Jadavani [mailto:subha...@codeaurora.org]
> > Sent: Tuesday, August 23, 2011 5:13 PM
> > To: 'Arindam Nath'
> > Subject: RE: [PAT
Hi Arindam,
Can you please check if this patch looks ok or not?
Regards,
Subhash
> mmc_sd_init_uhs_card function sets the driver type, current limit
> and bus speed mode on card as well as on host controller side.
>
> Currently bus speed mode is set by sending CMD6 to card and
> immediately sett
mmc_sd_init_uhs_card function sets the driver type, current limit
and bus speed mode on card as well as on host controller side.
Currently bus speed mode is set by sending CMD6 to card and
immediately setting the timing mode in host controller. But
then before initiating tuning sequence, it also t
