From: Kevin Liu <kl...@marvell.com>

Commands without data transfer like cmd5/cmd7 will use previous
transfer mode setting, which may lead to error since some bits
may have been set unexpectedly.
For example, cmd5 following cmd18/cmd25 will have timeout error
since audo cmd23 has been enabled.

Reviewed By: Girish K S <girish.shivananja...@linaro.org>
Reviewed-by: Zhangfei Gao <zhangfei....@marvell.com>
Signed-off-by: Jialing Fu <j...@marvell.com>
Signed-off-by: Tim Wang <wan...@marvell.com>
Signed-off-by: Kevin Liu <kl...@marvell.com>
---
 drivers/mmc/host/sdhci.c |   22 ++++++++++++++--------
 1 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0e15c79..9be6a8c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -886,8 +886,21 @@ static void sdhci_set_transfer_mode(struct sdhci_host 
*host,
        u16 mode;
        struct mmc_data *data = cmd->data;
 
-       if (data == NULL)
+       if (!data) {
+               if (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
+                       cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
+                       /*
+                        * The tuning block is sent by the card to the host
+                        * controller. So we set the TRNS_READ bit in the
+                        * Transfer Mode register. This also takes care of
+                        * setting DMA Enable and Multi Block Select in the
+                        * same register to 0.
+                        */
+                       sdhci_writew(host, SDHCI_TRNS_READ, 
SDHCI_TRANSFER_MODE);
+               else
+                       sdhci_writew(host, 0, SDHCI_TRANSFER_MODE);
                return;
+       }
 
        WARN_ON(!host->data);
 
@@ -1850,13 +1863,6 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, 
u32 opcode)
                                     SDHCI_BLOCK_SIZE);
                }
 
-               /*
-                * The tuning block is sent by the card to the host controller.
-                * So we set the TRNS_READ bit in the Transfer Mode register.
-                * This also takes care of setting DMA Enable and Multi Block
-                * Select in the same register to 0.
-                */
-               sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
 
                sdhci_send_command(host, &cmd);
 
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to