Find below diff :
--- queue.c 2010-07-13 13:52:53.0 +0530
+++ queue_2_6_34.c 2010-07-13 13:54:35.0 +0530
@@ -236,17 +236,18 @@ void mmc_cleanup_queue(struct mmc_queue
struct request_queue *q = mq->queue;
unsigned long flags;
- /* Mark that we should
Hi Madhav,
I have change the card remove sequence as per latest kernel source
2.6.34 after changing this i face the same issue is there any
way to check card detect status at block layer ? or any other way to
avoid it
>>Can i see your changes made by you..paste your diff here..
Hi Madhav,
I have change the card remove sequence as per latest kernel source
2.6.34 after changing this i face the same issue is there any
way to check card detect status at block layer ? or any other way to
avoid it
After removing card when i execute any command on board then
I am using 2.6.30 linux kernel version ...
>>As i told you previously that you need to flush queue as soon as possible
>>once you remove the card.
So once you remove card mmc_blk_remove() gets called which calls
mmc_cleanup_queue() and it further intenally calls
kthread_stop()(stops thread w
I am using 2.6.30 linux kernel version ...
On Fri, Jul 9, 2010 at 9:20 AM, Madhav Chauhan wrote:
> On Thu, Jul 8, 2010 at 11:38 PM, hardik patel wrote:
>> Hi Madhav,
>>
>> thanks for your interest... I have card detect register so mmc_get_cd
>> function i can check whether card is inserted or no
On Thu, Jul 8, 2010 at 11:38 PM, hardik patel wrote:
> Hi Madhav,
>
> thanks for your interest... I have card detect register so mmc_get_cd
> function i can check whether card is inserted or not ... so in sd host
> controller driver can detect that properly... but i think block driver
> does not d
Hi Madhav,
thanks for your interest... I have card detect register so mmc_get_cd
function i can check whether card is inserted or not ... so in sd host
controller driver can detect that properly... but i think block driver
does not detect that where i have to flush my request queue... i
have
Card removal not detected by driver?
You should see a line of log if card removal is detected:
card removed
Would you describe how do you detect card removal/insertion on your board?
Regards,
-Ethan
On Thu, Jul 8, 2010 at 6:05 PM, hardik patel wrote:
> I have sd card on board ... Du
Card removal not detected by driver?
You should see a line of log if card removal is detected:
card removed
Would you describe how do you detect card removal/insertion on your board?
Regards,
-Ethan
On Thu, Jul 8, 2010 at 6:05 PM, hardik patel wrote:
> I have sd card on board ... During re