Recent OMAP git broken on Beagle

I tried latest OMAP git (2.6.26-rc1-omap1, git from today, HEAD == 42fa072e237427675752bb9da05bf406bff19719, "OMAP3 EVM: enable ethernet support") on OMAP3 based BeagleBoard and it immediately stops after output of Kernel command line (with CONFIG_DEBUG_LL enabled): ... Built 1 zonelists in

Re: [beagleboard] Re: TWL4030 intermittent freakout on boot

FWIW, I've never had any issues with the twl4030 on my OMAP3 EVM. Both it and the MMC come up fine every boot. I'm sure that by saying that I have jinxed myself and will have no end of issues from this point forward :-) It's not obvious from looking at the board files why this might be. Perhaps t

Re: [PATCH] OMAP: EHCI: Support new USB expansion board

Hi, * Pandita, Vikram <[EMAIL PROTECTED]> [080502 03:04]: > > - Code changes for next revision of USB expansion board 750-2099-001(C) >with h/w bug fixes to support ISP1504 PHY in input clocking mode > > - Changes tested on SDP3430 Does this still work with older boards too? Tony > Sig

Re: [RFC/PATCH 0/3] OMAP3 EVM: enable ethernet support

* Steve Sakoman <[EMAIL PROTECTED]> [080508 09:48]: > This series of patches enables ethernet support on the OMAP3 EVM. It > has been tested with an x11 image and I was able to successfully > browse the web and download OE packages. > > The first patch has been submitted to linux-netdev by Nishan

Re: pending patch

* Felipe Balbi <[EMAIL PROTECTED]> [080509 02:20]: > On Fri, Apr 25, 2008 at 09:45:43PM +0300, ext Felipe Balbi wrote: > > On Fri, Apr 25, 2008 at 09:36:44AM -0700, Tony Lindgren wrote: > > > * Felipe Balbi <[EMAIL PROTECTED]> [080425 03:19]: > > > > On Fri, Apr 25, 2008 at 02:35:21AM -0700, David

Re: [PATCH] ARM: OMAP: add RTC support to beagleboard

* Koen Kooi <[EMAIL PROTECTED]> [080509 07:56]: > > Op 8 mei 2008, om 19:04 heeft Koen Kooi het volgende geschreven: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA1 > > > > > > Op 8 mei 2008, om 18:55 heeft andrzej zaborowski het volgende > > geschreven: > >> Something must be missing here

Re: [PATCH try #2] powerdomain: convert pwrdm_mutex to rwsem

* Paul Walmsley <[EMAIL PROTECTED]> [080507 17:54]: > > Hi, > > that last patch escaped with some trailing whitespace. Here's a fixed > copy. Correction, pushing this one instead. Tony > - Paul > > --- > > > Convert pwrdm_mutex to pwrdm_rwsem to avoid trying to relock mutex in the > even

Re: [PATCH 0/2] OMAP3 clock: two small fixes

* Paul Walmsley <[EMAIL PROTECTED]> [080507 18:29]: > Two minor OMAP3 clock framework fixes. This series: > > - puts the sys_clkout2 struct clk into the core_clkdm where it belongs > > - removes the omap2_noncore_dpll_set_rate() function pointer from the > DPLL3 struct clk (since DPLL3 is the

Re: [PATCH] powerdomain: convert pwrdm_mutex to rwsem

* Paul Walmsley <[EMAIL PROTECTED]> [080507 17:42]: > > Convert pwrdm_mutex to pwrdm_rwsem to avoid trying to relock mutex in the > event that the pwrdm_for_each() callback function calls something that > triggers a pwrdm_lookup(). Problem found by Jouni Högander > <[EMAIL PROTECTED]> Pushing

Re: [PATCH 0/5] sparse, checkpatch cleanup in mach-omap2

* Paul Walmsley <[EMAIL PROTECTED]> [080507 12:51]: > It's springtime in the Northern Hemisphere; time for plants to flower, > students to graduate, or not, and Linux hackers to generate cleanup > patches against the source tree... > > These patches fix all of the sparse warnings against the > arc

Re: [beagleboard] Re: TWL4030 intermittent freakout on boot

* Dirk Behme <[EMAIL PROTECTED]> [080509 11:08]: > Tony Lindgren wrote: >> * Koen Kooi <[EMAIL PROTECTED]> [080508 11:22]: >> >>> Op 8 mei 2008, om 20:13 heeft Paul Walmsley het volgende geschreven: >>> Hello everyone, occasionally the TWL4030 driver on the 3430SDP freaks out on boot

Re: [PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output

Op 9 mei 2008, om 20:57 heeft Koen Kooi het volgende geschreven: This patch adds a driver to turn on the TFP410 framer that drives the DVI port on the beagleboard. Framebuffer console is looking strange, but X11 works great. Updated version addressing Steves comments: This patch adds a dri

Re: [PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 This applies on top of the RTC patch I sent earlier: http://article.gmane.org/gmane.linux.ports.arm.omap/8171 Op 9 mei 2008, om 20:57 heeft Koen Kooi het volgende geschreven: This patch adds a driver to turn on the TFP410 framer that drives the D

[PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output

This patch adds a driver to turn on the TFP410 framer that drives the DVI port on the beagleboard. Framebuffer console is looking strange, but X11 works great. Signed-off-by: Koen Kooi <[EMAIL PROTECTED]> --- arch/arm/mach-omap2/board-omap3beagle.c | 11 +++ drivers/video/omap/Makefile

Re: [beagleboard] Re: TWL4030 intermittent freakout on boot

Tony Lindgren wrote: * Koen Kooi <[EMAIL PROTECTED]> [080508 11:22]: Op 8 mei 2008, om 20:13 heeft Paul Walmsley het volgende geschreven: Hello everyone, occasionally the TWL4030 driver on the 3430SDP freaks out on boot. (This is either an ES2.0 or ES2.1, not sure.) Here's a partial cons

Re: [PATCH 6/7] OMAP3 EVM: add lcd support (resubmit to respond to feedback)

> I strongly suspect the above comments needs to be "/* in kHz */ ... That is correct - a cut and paste from the old style driver that I did not fix. I will submit a cleanup patch later today. Thanks! Steve On Fri, May 9, 2008 at 9:35 AM, Koen Kooi <[EMAIL PROTECTED]> wrote: > -BEGIN PGP

Re: [PATCH 1/11] ARM: OMAP: Update MMC header to fix compile

* Felipe Balbi <[EMAIL PROTECTED]> [080509 02:51]: > > > On Thu, 8 May 2008 15:49:25 -0700, Tony Lindgren <[EMAIL PROTECTED]> wrote: > > Update MMC header from linux-omap tree to match the recent > > MMC driver updates. > > > > Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]> > > --- > > inclu

Re: [PATCH 6/7] OMAP3 EVM: add lcd support (resubmit to respond to feedback)

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Op 30 apr 2008, om 16:14 heeft Steve Sakoman het volgende geschreven: From: Steve Sakoman <[EMAIL PROTECTED]> Add LCD support for OMAP3 EVM Signed-off-by: Steve Sakoman <[EMAIL PROTECTED]> --- +#define LCD_PIXCLOCK_MAX 41700 /* in pico seco

Re: [PATCH] ARM: OMAP: add RTC support to beagleboard

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Op 8 mei 2008, om 19:04 heeft Koen Kooi het volgende geschreven: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Op 8 mei 2008, om 18:55 heeft andrzej zaborowski het volgende geschreven: Something must be missing here, omap3_beagle_devices is not

Re: 2430SDP booting problem with the latest git

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Op 9 mei 2008, om 15:42 heeft Felipe Balbi het volgende geschreven: On Fri, 9 May 2008 18:43:40 +0530, "arun c" TWL4030 GPIO Demux: IRQ Range 384 to 402, Initialization Failed omapflash.0: Found 1 x16 devices at 0x0 in 16-bit bank omapflash.0

Re: 2430SDP booting problem with the latest git

On Fri, 9 May 2008 18:43:40 +0530, "arun c" <[EMAIL PROTECTED]> wrote: > Hi all, > > While booting the 2430sdp with the latest git kernel nothing is > coming on lcd, omapfb driver fails to initialize the lcd due > to twl4030 accessing errors. > > I have tested the hardware with the 2.6.14 kerne

2430SDP booting problem with the latest git

Hi all, While booting the 2430sdp with the latest git kernel nothing is coming on lcd, omapfb driver fails to initialize the lcd due to twl4030 accessing errors. I have tested the hardware with the 2.6.14 kernel from ti site, its working fine. boot log is pasted below below(also attached).

Re: [PATCH 1/11] ARM: OMAP: Update MMC header to fix compile

On Thu, 8 May 2008 15:49:25 -0700, Tony Lindgren <[EMAIL PROTECTED]> wrote: > Update MMC header from linux-omap tree to match the recent > MMC driver updates. > > Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]> > --- > include/asm-arm/arch-omap/mmc.h | 26 -- > 1 fil

Re: pending patch

On Fri, Apr 25, 2008 at 09:45:43PM +0300, ext Felipe Balbi wrote: > On Fri, Apr 25, 2008 at 09:36:44AM -0700, Tony Lindgren wrote: > > * Felipe Balbi <[EMAIL PROTECTED]> [080425 03:19]: > > > On Fri, Apr 25, 2008 at 02:35:21AM -0700, David Brownell wrote: > > > > On Friday 25 April 2008, Felipe Bal