Hi,
On Thu, Nov 11, 2010 at 6:02 PM, Kevin Hilman
wrote:
> Emeltchenko Andrei writes:
>
>> From: Andrei Emeltchenko
>>
>> Define MDR1 register serial definitions used in serial and
>> bluetooth drivers. Remove magic numbers there.
>
> Remove magic numbers where? This patch doesn't remove anyth
From: Felipe Balbi
Get rid of the following warning:
arch/arm/mach-omap1/devices.c: In function 'omap_init_wdt':
arch/arm/mach-omap1/devices.c:298: warning: 'return' with
no value, in function returning non-void
while at that, also change:
platform_device_register();
return 0;
into:
return p
From: Mathias Nyman
Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by
reading the register
directly after write. This prevents the spurious DMA interrupts noted when
using VDD_OPP 1
Signed-off-by: Mathias Nyman
Acked-by: Santosh Shilimkar
Signed-off-by: Tony Lindgren
From: Janusz Krzysztofik
#include directive is required to
compile the dependant boards (board-ams-delta for now).
Signed-off-by: Janusz Krzysztofik
[t...@atomide.com: updated comments]
Signed-off-by: Tony Lindgren
---
arch/arm/mach-omap1/include/mach/camera.h |2 ++
1 files changed, 2 i
Hi all,
Here are few fixes for review.
Regards,
Tony
---
Felipe Balbi (1):
arm: omap1: devices: need to return with a value
Janusz Krzysztofik (1):
OMAP1: camera.h: add missing include
Mathias Nyman (1):
omap: dma: Add read-back to DMA interrupt handler to avoid
spuriousin
From: Thomas Weber
This patch fixes the following error:
>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
>twl_reg twl_reg.6: can't register VMMC1, -22
>twl_reg: probe of twl_reg.6 failed with error -22
Signed-off-by: Thomas Weber
Signed-off-by: Tony Lindgren
---
arch/arm/mach-
Thara Gopinath writes:
[...]
> +/**
> * omap_vdd_info - Per Voltage Domain info
> *
> * @volt_data: voltage table having the distinct voltages
> supported
> @@ -95,9 +112,13 @@ struct vp_reg_val {
> * vp registers
> * @voltdm : pointer to
Thara Gopinath writes:
> This patch introduces a user list of devices associated with each
> voltage domain instance. The user list is implemented using plist
> structure with priority node populated with the voltage values.
> This patch also adds an API which will take in a device and
> requeste
Thara Gopinath writes:
> This patch introduces an API to take in the voltage domain and the
> new voltage as parameter and to scale all the scalable devices
> associated with the the voltage domain to the rate corresponding to the
> new voltage and scale the voltage domain to the new voltage.
>
>
Kevin Hilman writes:
> "G, Manjunath Kondaiah" writes:
>
>> Add OMAP2420 DMA hwmod structures.
>
> s/structures/data/
>
> Also, as pointed out in many other hwmod reviews, when adding hwmod
> data, subject should be something like:
>
> OMAP2420: hwmod_data: add system DMA
>
Oops... no un
Thara Gopinath writes:
> This patch extends the omap_device structure to contain
> pointers to scale the operating rate of the
> device and to retrieve the operating rate of the device.
> This patch also adds the three new APIs in the omap device layer
> namely omap_device_set_rate that can be ca
Please note that the full muxmodes are re-defined for ES2 instead
of using the subset. There are 81 differences among 204 pins.
The subset fixup will have to iterate over the whole list for each
subset entry, which can lead to an important number of iteration.
On the other hand, it will take much m
From: sricharan
The mux framework allows the change of pad configuration by drivers
when needed. Prior to this the mux framework has to be initialised
with all the mux parameters specific to the board. The mux init is
already present in the board file for SDP. Adding the mux init
for panda boards
Select the CBS package if SDP4430 is enabled during config.
Use the proper package (CBL or CBS) based on chip revision.
Signed-off-by: Benoit Cousson
Cc: Tony Lindgren
Cc: Paul Walmsley
Cc: Santosh Shilimkar
Cc: Anand Gadiyar
---
arch/arm/mach-omap2/Kconfig |1 +
arch/arm/mach-om
Select the CBL package if SDP4430 is enabled during config.
Initialize the mux framework during the board init.
Signed-off-by: Benoit Cousson
Cc: Tony Lindgren
Cc: Paul Walmsley
Cc: Kevin Hilman
---
arch/arm/mach-omap2/Kconfig |1 +
arch/arm/mach-omap2/board-4430sdp.c | 10 +
Starting on OMAP4, the pin mux configuration is located in two
different partitions of the control module (CODE_PAD and WKUP_PAD).
The first one is inside the core power domain whereas the second
one is inside the wakeup.
- Add the capability to add any number of partition during board init
time de
Replace all the printk(KERN_XXX... with pr_xxx macros.
Signed-off-by: Benoit Cousson
Cc: Tony Lindgren
Cc: Paul Walmsley
Cc: Kevin Hilman
---
arch/arm/mach-omap2/mux.c | 38 +++---
1 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach
Hi Tony,
Here is the version updated with your fixes.
This is the first non RFC version to make Nishant M. happy;-)
Thanks to you, the RX-51 is now handled properly and the low level API
is still public like before for dynamic mux use.
The pandaboard is now supported thanks to Sricharan, and a c
Hi,
I've found the problem and below is the fix. It appears your
SMSC9200 is faster than mine ;-) Once in a while mine gets through the
smsc911x_soft_reset() in 100 us but most of the time it takes a full
250 ms.
Rick
--- linux/drivers/net/smsc911x.c.~1~2010-11-08 19:53:03.0 -0
Thara Gopinath writes:
> There could be dependencies between various voltage domains for
> maintaining system performance or hardware limitation reasons
> like VDD should be at voltage v1 when VDD is at voltage v2.
> This patch introduce dependent vdd information structures in the
> voltage layer
On 11/11/2010 5:53 PM, Tony Lindgren wrote:
* Cousson, Benoit [101020 13:43]:
On 10/20/2010 1:06 AM, Tony Lindgren wrote:
* Benoit Cousson [101019 15:14]:
It takes into account your proposal to store partition
information in a partition structure instead of inside every pad entries.
The m
On 11/11/2010 5:38 PM, Tony Lindgren wrote:
* Cousson, Benoit [10 04:24]:
Hi Tony,
On 11/11/2010 2:56 AM, Tony Lindgren wrote:
* Benoit Cousson [101019 15:14]:
Add data for OMAP4430 generated from HW pinout& register database.
The data set is split in two partitions for both core and
* Cousson, Benoit [10 08:40]:
> On 11/11/2010 5:35 PM, Tony Lindgren wrote:
>
> Oops yep, I forgot to remove the @id in the kerneldoc.
> I was about to send the next revision, maybe I should wait a little
> bit more.
Well I think that's all I had to comment on these. Just please update
the p
* Cousson, Benoit [101020 13:43]:
>
> On 10/20/2010 1:06 AM, Tony Lindgren wrote:
> >* Benoit Cousson [101019 15:14]:
> >>
> >>It takes into account your proposal to store partition
> >>information in a partition structure instead of inside every pad entries.
> >>The mechanism relies on the uniq
On 11/11/2010 5:35 PM, Tony Lindgren wrote:
* Benoit Cousson [101019 15:14]:
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
+
+/**
+ * struct mux_partition - contain partition related information
+ * @name: name of the current partition
+ * @flags: flags specific to this partit
* Cousson, Benoit [10 04:24]:
> Hi Tony,
>
> On 11/11/2010 2:56 AM, Tony Lindgren wrote:
> >* Benoit Cousson [101019 15:14]:
> >>Add data for OMAP4430 generated from HW pinout& register database.
> >>The data set is split in two partitions for both core and wkup.
> >
> >We should drop patch
* Benoit Cousson [101019 15:14]:
> --- a/arch/arm/mach-omap2/mux.h
> +++ b/arch/arm/mach-omap2/mux.h
> +
> +/**
> + * struct mux_partition - contain partition related information
> + * @name: name of the current partition
> + * @flags: flags specific to this partition
> + * @phys: physical address
Emeltchenko Andrei writes:
> From: Andrei Emeltchenko
>
> Define MDR1 register serial definitions used in serial and
> bluetooth drivers. Remove magic numbers there.
Remove magic numbers where? This patch doesn't remove anything.
> *v2 added OMAP keyword
This info should go after the '---'
"Peter 'p2' De Schrijver" writes:
> On Wed, Nov 10, 2010 at 06:32:53PM +0100, ext Kevin Hilman wrote:
>> Jean Pihet writes:
>>
>> > l-o is currently broken wrt to suspend and idle.
>> > Solutions are being worked on for the moment.
>> >
>> > Kevin, are there solutions available yet?
>>
>> The
Hello Felipe,
On Thu, 11 Nov 2010, Felipe Contreras wrote:
> On Thu, Nov 11, 2010 at 2:00 AM, Paul Walmsley wrote:
> >
> > I see that you modified my original patch, but it seems that you also
> > dropped my Signed-off-by:.
>
> Yes, because you didn't s-o-b my changes. I got that complaint from
From: Andrei Emeltchenko
Define MDR1 register serial definitions used in serial and
bluetooth drivers. Remove magic numbers there.
*v2 added OMAP keyword
Signed-off-by: Andrei Emeltchenko
---
include/linux/serial_reg.h | 12
1 files changed, 12 insertions(+), 0 deletions(-)
On Wed, Nov 10, 2010 at 07:50:23PM -0600, Omar Ramirez Luna wrote:
> Hi Greg,
>
> Please consider the following patch set for tidspbridge driver in
> staging tree, the following has been tested on an omap3430 based board
> + gst-dsp environment. Many thanks to Felipe Contreras for piling this up,
Hi Tony,
On 11/11/2010 2:56 AM, Tony Lindgren wrote:
* Benoit Cousson [101019 15:14]:
Add data for OMAP4430 generated from HW pinout& register database.
The data set is split in two partitions for both core and wkup.
We should drop patch 3/7 and merge the following patch to your
4/7 patch.
On 11/11/2010 10:34 AM, Hemanth V wrote:
- Original Message - From: "Gregory CLEMENT"
To: "spi-devel-general" ;
"linux-omap"
Cc: "David Brownell" ; "Grant Likely"
; "Kevin Hilman"
Sent: Wednesday, November 10, 2010 4:02 PM
Subject: [PATCH v2 2/2] spi: Force CS to be in inactive state a
On Wed, Nov 10, 2010 at 06:32:53PM +0100, ext Kevin Hilman wrote:
> Jean Pihet writes:
>
> > l-o is currently broken wrt to suspend and idle.
> > Solutions are being worked on for the moment.
> >
> > Kevin, are there solutions available yet?
>
> The solution to your previous problem (ensuring ru
On Thu, Nov 11, 2010 at 2:00 AM, Paul Walmsley wrote:
> Hello Felipe,
>
> On Sun, 7 Nov 2010, Felipe Contreras wrote:
>
>> From: Paul Walmsley
>>
>> Add two functions for OMAP2430/OMAP3 IVA2 DSP boot control. These
>> registers wound up in the System Control Module. Other kernel code that
>> wi
From: Andrei Emeltchenko
Define MDR1 register serial definitions used in serial and
bluetooth drivers. Remove magic numbers there.
Signed-off-by: Andrei Emeltchenko
---
include/linux/serial_reg.h | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/include/linux
- Original Message -
From: "Gregory CLEMENT"
To: "spi-devel-general" ;
"linux-omap"
Cc: "David Brownell" ; "Grant Likely"
; "Kevin Hilman"
Sent: Wednesday, November 10, 2010 4:02 PM
Subject: [PATCH v2 2/2] spi: Force CS to be in inactive state after off-mode
transition
When SPI w
Hi Paul,
> -Original Message-
> From: Paul Walmsley [mailto:p...@pwsan.com]
> Sent: Thursday, November 11, 2010 4:45 AM
> To: G, Manjunath Kondaiah
> Cc: linux-omap@vger.kernel.org; Kevin Hilman; Gadiyar, Anand;
> Cousson, Benoit
> Subject: Re: [PATCH v2] OMAP2+: PM: omap_device: API fo
39 matches
Mail list logo