Hi,
2010/11/14 Marc Zyngier m...@misterjones.org:
On Sun, 14 Nov 2010 19:11:46 +0100
Enric Balletbò i Serra eballe...@gmail.com wrote:
Why we need to define an unexistent regulator in board file ? This
should not be done enabling the CONFIG_DUMMY_REGULATOR in your kernel
configuration ?
Hi,
Bryan Wu wrote:
On Mon, Nov 15, 2010 at 12:05 PM, Taneja, Archit
arc...@ti.com wrote:
Hi,
bryan...@canonical.com wrote:
On Wed, Nov 10, 2010 at 10:35 PM, Tomi Valkeinen
[snip]
For both panel power on and off some panels require some sleep times:
when powering on, the video
While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers
are not getting detected some times.
During reset of command/data line, wrong pointer to base address
was passed while read operation to SYSCTL register, thus impacting
the updated reset logic.
Passing correct base address fixes
On Mon, Nov 15, 2010 at 03:08:59AM -0600, Kadiyala, Kishore wrote:
While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers
are not getting detected some times.
During reset of command/data line, wrong pointer to base address
was passed while read operation to SYSCTL register, thus
On Sun, 2010-11-14 at 02:42 +0100, ext Bryan Wu wrote:
On Wed, Nov 10, 2010 at 10:35 PM, Tomi Valkeinen
tomi.valkei...@nokia.com wrote:
Hi,
On Tue, 2010-11-09 at 18:12 +0100, ext Bryan Wu wrote:
Generic DPI panel driver includes the driver and 4 similar panel
configurations. It
will
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Thursday, November 11, 2010 12:30 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v4 1/9] OMAP3: PM: Adding
Hello,
On Wed, 10 Nov 2010 09:32:53 -0800
Kevin Hilman khil...@deeprootsystems.com wrote:
The other problem that I'm aware of so far I've only seen on boards
with UART2 console (beagle, Overo, n900.) The printk messages that
warn of 'new worst case [de]activate latency seem to be racing with
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Thursday, November 11, 2010 12:43 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v4 7/9] OMAP3: PM: Adding
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Thursday, November 11, 2010 12:52 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v3 2/6] OMAP4: Adding voltage
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Thursday, November 11, 2010 6:19 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v2 04/14] OMAP: Introduce API
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Friday, November 12, 2010 4:29 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v2 05/14] OMAP: Introduce device
Belisko Marek wrote:
On Fri, Nov 12, 2010 at 12:47 PM, Samreen samr...@ti.com wrote:
A null pointer check added.
Signed-off-by: Samreen samr...@ti.com
---
drivers/video/omap2/omapfb/omapfb-main.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git
Ville Syrjälä wrote:
On Fri, Nov 12, 2010 at 12:47:15PM +0100, ext Samreen wrote:
A null pointer check added.
Signed-off-by: Samreen samr...@ti.com
---
drivers/video/omap2/omapfb/omapfb-main.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git
On Mon, 15 Nov 2010 11:50:05 +0100
Thomas Petazzoni thomas.petazz...@free-electrons.com wrote:
# echo enabled /sys/class/tty/ttyO2/power/wakeup
# echo mem /sys/power/state
[ 227.685028] PM: Syncing filesystems ... done.
[ 227.699432] Freezing user space processes ... (elapsed 0.01
Hi all,
Linux-next as of 20101115 fails to boot up on a zoom3. earlyprintk throws
the following crash.
[0.00] MUX: Add partition: #1: core, flags: 0
[0.00] Unable to handle kernel paging request at virtual address
01000268
[0.00] pgd = c0004000
[0.00] [01000268
On Mon, Nov 15, 2010 at 6:43 PM, Thomas Petazzoni
thomas.petazz...@free-electrons.com wrote:
On Mon, 15 Nov 2010 11:50:05 +0100
Thomas Petazzoni thomas.petazz...@free-electrons.com wrote:
# echo enabled /sys/class/tty/ttyO2/power/wakeup
# echo mem /sys/power/state
[ 227.685028] PM:
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Friday, November 12, 2010 5:04 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re: [PATCH v2 06/14] OMAP: Voltage layer
Hello Govindraj,
On Mon, 15 Nov 2010 19:24:05 +0530
Govindraj govindraj...@gmail.com wrote:
Can you check if you have below two patches in the kernel you have?
http://www.spinics.net/lists/linux-serial/msg02684.html
http://www.spinics.net/lists/linux-serial/msg02683.html
If not there can
On Mon, 2010-11-15 at 07:09 +0100, ext Samreen wrote:
This patch series adds the Display Support for OMAP3 platforms
and the corresponding changes in the board files.
Version3:
- Rebase to the latest LO
Version2:
- Optimised to configure INTBR from gpio to PWM1 mode setting and
-Original Message-
From: Tony Lindgren [mailto:t...@atomide.com]
Sent: Thursday, November 04, 2010 10:54 PM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; khil...@deeprootsystems.com;
Cousson, Benoit; Sripathy, Vishwanath; Sawant, Anand
Subject: Re: [PATCH v3 1/6]
-Original Message-
From: Tony Lindgren [mailto:t...@atomide.com]
Sent: Thursday, November 04, 2010 10:50 PM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; khil...@deeprootsystems.com;
Cousson, Benoit; Sripathy, Vishwanath; Sawant, Anand
Subject: Re: [PATCH v3 3/6]
-Original Message-
From: Sripathy, Vishwanath
Sent: Thursday, November 11, 2010 11:30 AM
To: Gopinath, Thara; linux-omap@vger.kernel.org
Cc: p...@pwsan.com; khil...@deeprootsystems.com; Cousson, Benoit; Sawant,
Anand
Subject: RE: [PATCH v4 1/9] OMAP3: PM: Adding voltage driver support
Hi,
On Mon, 2010-11-08 at 13:24 +0100, ext Archit Taneja wrote:
From: Sumit Semwal sumit.sem...@ti.com
Introduce new enum members for LCD2 Channel and corresponding Overlay Manager.
Represent some of the DISPC register defines with channel as a parameter
to differentiate between LCD,
-Original Message-
From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc-
ow...@vger.kernel.org] On Behalf Of kishore kadiyala
Sent: Monday, November 15, 2010 3:09 AM
To: linux-...@vger.kernel.org; linux-omap@vger.kernel.org
Subject: omap4: hsmmc: Fix improper card detection
From: Mans Rullgard m...@mansr.com
Enabling L2 prefetching improves performance as shown on Panda
ES2.1 board with mem test, and it has measurable impact on
performances. I think we should consider it, even though it damages
writes a bit. (rebased to k.org)
Usually the prefetch is used at both
Nishanth Menon n...@ti.com writes:
From: Mans Rullgard m...@mansr.com
Enabling L2 prefetching improves performance as shown on Panda
ES2.1 board with mem test, and it has measurable impact on
performances. I think we should consider it, even though it damages
writes a bit. (rebased to
Hi Thara,
On Mon, 15 Nov 2010, Gopinath, Thara wrote:
-Original Message-
From: Paul Walmsley [mailto:p...@pwsan.com]
Sent: Saturday, October 30, 2010 3:07 PM
Please don't remove this comment unless you're also adding the ES1 clocks
back.
I did not remove this. The script did
* Anand Gadiyar gadi...@ti.com [101115 05:19]:
Hi all,
Linux-next as of 20101115 fails to boot up on a zoom3. earlyprintk throws
the following crash.
[0.00] MUX: Add partition: #1: core, flags: 0
[0.00] Unable to handle kernel paging request at virtual address
01000268
This patch adds OPP tables for OMAP4. New file has been added to keep
the OMAP4 opp tables and the registration of these tables with the
generic opp framework by OMAP SoC OPP interface.
Based on:
Series version 3 incorporating changes for the comments
for using device_initcall to initialize the opp layer
patches based on kernel.org 2.6.37-rc1
V2: http://marc.info/?t=12875366533r=1w=2
Kevin Hilman (1):
OMAP3: remove OPP interfaces from OMAP PM layer
Nishanth Menon (2):
omap:
Add OPP data for OMAP34xx and OMAP36xx and initialization functions
to populate OPP tables based on current SoC.
introduce an OMAP generic opp initialization routine which OMAP3
and OMAP4+ SoCs can use to register their OPP definitions.
Signed-off-by: Kevin Hilman khil...@deeprootsystems.com
From: Kevin Hilman khil...@deeprootsystems.com
With new OPP layer, OPP users will access OPP API directly instead of
using OMAP PM layer, so remove all notions of OPPs from the OMAP PM
layer.
Signed-off-by: Nishanth Menon n...@ti.com
Signed-off-by: Kevin Hilman khil...@deeprootsystems.com
---
Thomas Petazzoni thomas.petazz...@free-electrons.com writes:
On Mon, 15 Nov 2010 11:50:05 +0100
Thomas Petazzoni thomas.petazz...@free-electrons.com wrote:
# echo enabled /sys/class/tty/ttyO2/power/wakeup
# echo mem /sys/power/state
[ 227.685028] PM: Syncing filesystems ... done.
[
Gopinath, Thara th...@ti.com writes:
[...]
cpu_is_* checks are only acceptable at init time. This one happens
during every scale. These VC settings should be set at init time only.
Same issue with forceupdate_scale.
These masks are needed only in vc bypass voltage scaling API. I was
* Benoit Cousson b-cous...@ti.com [10 13:26]:
Starting on OMAP4, the pin mux configuration is located in two
different partitions of the control module (CODE_PAD and WKUP_PAD).
The first one is inside the core power domain whereas the second
one is inside the wakeup.
- Add the capability
* Tomi Valkeinen tomi.valkei...@nokia.com [101115 06:32]:
On Mon, 2010-11-15 at 07:09 +0100, ext Samreen wrote:
This patch series adds the Display Support for OMAP3 platforms
and the corresponding changes in the board files.
Version3:
- Rebase to the latest LO
Version2:
-
Hi Linus,
Please pull some trivial omap fixes from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
omap-fixes-for-linus
Regards,
Tony
The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4:
Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400)
are
Hi Tony,
On 11/15/2010 9:03 PM, Tony Lindgren wrote:
* Benoit Coussonb-cous...@ti.com [10 13:26]:
Starting on OMAP4, the pin mux configuration is located in two
different partitions of the control module (CODE_PAD and WKUP_PAD).
The first one is inside the core power domain whereas the
Gopinath, Thara th...@ti.com writes:
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Thursday, November 11, 2010 12:43 AM
To: Gopinath, Thara
Cc: linux-omap@vger.kernel.org; p...@pwsan.com; Cousson, Benoit; Sripathy,
Vishwanath; Sawant, Anand
Subject: Re:
Hi Sricharan,
On 11/15/2010 8:38 AM, R, Sricharan wrote:
This series updates the core device drivers to use mux framework
for OMAP4 SDP and PANDA board. It's generated against the
linux-omap master branch. It has a dependency on the Benoit's
omap4 mux data series.
Hello,
On Mon, 15 Nov 2010 13:27:39 -0600
Nishanth Menon n...@ti.com wrote:
+++ b/arch/arm/mach-omap2/opp3xxx_data.h
+
+static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
+
+static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
Do we really want to have structure
Thomas Petazzoni had written, on 11/15/2010 04:51 PM, the following:
Hello,
On Mon, 15 Nov 2010 13:27:39 -0600
Nishanth Menon n...@ti.com wrote:
+++ b/arch/arm/mach-omap2/opp3xxx_data.h
+
+static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
+
+static struct omap_opp_def
Tony Lindgren wrote:
* Tomi Valkeinen tomi.valkei...@nokia.com [101115 06:32]:
On Mon, 2010-11-15 at 07:09 +0100, ext Samreen wrote:
This patch series adds the Display Support for OMAP3 platforms and
the corresponding changes in the board files.
Version3:
- Rebase to the latest LO
This patch series adds the Display Support for OMAP3 platforms
and the corresponding changes in the board files.
Version3:
- Rebase to the latest LO
Version2:
- Optimised to configure INTBR from gpio to PWM1 mode setting and
enabling of the PWM1 mode only when its not in PWM1 mode.
From: Kishore Y kishor...@ti.com
Board-zoom-display.c added as a common file for display functionality
on boards zoom2, zoom3 and 3630sdp.
Signed-off-by: Mukund Mittal mmit...@ti.com
Signed-off-by: Kishore Y kishor...@ti.com
Signed-off-by: Rajkumar N rajkumar.nagara...@ti.com
Signed-off-by:
From: Kishore Y kishor...@ti.com
Enable Display on zoom2, zoom3 and 3630sdp boards.
Signed-off-by: Mukund Mittal mmit...@ti.com
Signed-off-by: Kishore Y kishor...@ti.com
Signed-off-by: Samreen samr...@ti.com
---
arch/arm/mach-omap2/board-3630sdp.c |1 +
arch/arm/mach-omap2/board-zoom2.c |
There are 4 duplicated DPI panel drivers in DSS2 display driver. They are
similar and a generic DPI panel driver can support all them with specific
panel configuration. And new DPI panel driver can be easily supported
by adding panel configurations into generic panel DPI driver.
This patchset
Generic DPI panel driver includes the driver and 4 similar panel
configurations. It
will match the panel name which is passed from platform data and setup the
right configurations.
With generic DPI panel driver, we can remove those 4 duplicated panel display
drivers. In the future, it is simple
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use generic DPI
driver for sharp_ls_panel.
Signed-off-by: Bryan Wu bryan...@canonical.com
---
arch/arm/mach-omap2/board-3430sdp.c | 12 +---
Still keep sharp_ls_panel driver, because it contains blacklight control driver.
Signed-off-by: Bryan Wu bryan...@canonical.com
---
drivers/video/omap2/displays/Kconfig | 18 --
drivers/video/omap2/displays/Makefile |3 -
Hi,
Tomi Valkeinen wrote:
Hi,
On Mon, 2010-11-08 at 13:24 +0100, ext Archit Taneja wrote:
From: Sumit Semwal sumit.sem...@ti.com
Introduce new enum members for LCD2 Channel and corresponding Overlay
Manager.
Represent some of the DISPC register defines with channel as a
parameter to
Adding people in CC.
This series updates the core device drivers to use mux framework
for OMAP4 SDP and PANDA board. It's generated against the
linux-omap master branch. It has a dependency on the Benoit's
omap4 mux data series.
http://www.spinics.net/lists/linux-omap/msg40039.html
On Sat, Nov 13, 2010 at 12:44:42AM +0100, Gregory CLEMENT wrote:
When SPI wake up from OFF mode, CS is in the wrong state: force it
to the inactive state.
During the system life, I monitored the CS behavior using a oscilloscope.
I also activated debug in omap2_mcspi, so I saw when driver
53 matches
Mail list logo