Vishwanath Sripathy writes:
> Hi Kevin,
>
>> -Original Message-
>> From: Vishwanath Sripathy [mailto:vishwanath...@ti.com]
>> Sent: Tuesday, November 29, 2011 4:53 PM
>> To: Kevin Hilman
>> Cc: linux-omap@vger.kernel.org; linux-arm-ker...@lists.infradead.org
>> Subject: RE: [PATCHv2 0/7]A
Kevin Hilman writes:
> The MUSB driver does not currently implment suspend/resume callbacks,
> seemingly because it does not support cutting power when devices are
> connected in host mode.
>
> Without a proper suspend/resume implementation, the OMAP PM domain
> layer which automatically gates no
From: Robert Marklund
Date: Thu, 24 Nov 2011 12:03:07 +0100
> Add some basic regulator support for the power pins, as needed
> by the ST-Ericsson Snowball platform that powers up the SMSC911
> chip using an external regulator.
>
> Platforms that use regulators and the smsc911x and have no define
On Fri, Nov 25, 2011 at 09:49, Tero Kristo wrote:
> Now we select the vddmin and vddmax values based on both pmic and
> voltage processor data, this allows usage of different power ICs.
>
> Signed-off-by: Tero Kristo
Acked-by: Nishanth Menon
Regards,
Nishanth Menon
> ---
> arch/arm/mach-omap
On Fri, Nov 25, 2011 at 09:49, Tero Kristo wrote:
> Both startup and shutdown take 500us at maximum, value taken from
> TWL6030 data manual.
>
> Signed-off-by: Tero Kristo
> ---
> arch/arm/mach-omap2/omap_twl.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/a
On Fri, Nov 25, 2011 at 09:49, Tero Kristo wrote:
>
> Introduced two new voltage domain specific parameter structures,
> omap_vp_param and omap_vc_param. These are used to describe the minimum
> and maximum voltages for the voltagedomains, and also the sleep voltage
> levels. Existing voltage leve
On Tue, 29 Nov 2011, Cousson, Benoit wrote:
> On 11/27/2011 3:07 AM, Paul Walmsley wrote:
>
> > So just out of curiosity, do those SYSCONFIG registers in the STM address
> > space apply to the entire DEBUGSS, or just the STM IP block?
>
> The STM IP is the only one to have the TI generic wrapper
Hi Rajendra,
Sorry for the delay, I kind of forgot your series :-(
On 11/3/2011 11:54 AM, Nayak, Rajendra wrote:
Now that OMAP4 has hwmod/module level context lost counters, make
omap_hwmod_get_context_loss_count() return them on platforms where they
exist, else fall back on the pwrdm level cou
Hi Paul,
On 11/27/2011 3:07 AM, Paul Walmsley wrote:
On Sat, 26 Nov 2011, Paul Walmsley wrote:
Hi Benoît,
a question about this patch.
...
+ .name = "mipi_stm",
+ .pa_start = 0x54161000,
+ .pa_end = 0x54161fff,
+
"DebBarma, Tarun Kanti" writes:
> On Fri, Nov 4, 2011 at 3:14 AM, Kevin Hilman wrote:
>> Tarun Kanti DebBarma writes:
>>
>>> This series is continuation of cleanup of OMAP GPIO driver and fixes.
>>
>> Using this series on 3630/Zoom3, UART wakeups no longer work from
>> suspend. That suggests t
"DebBarma, Tarun Kanti" writes:
> On Fri, Nov 4, 2011 at 2:57 PM, DebBarma, Tarun Kanti
> wrote:
>> On Fri, Nov 4, 2011 at 3:14 AM, Kevin Hilman wrote:
>>> Tarun Kanti DebBarma writes:
>>>
This series is continuation of cleanup of OMAP GPIO driver and fixes.
>>>
>>> Using this series on 3
Hi Kevin,
> -Original Message-
> From: Vishwanath Sripathy [mailto:vishwanath...@ti.com]
> Sent: Tuesday, November 29, 2011 4:53 PM
> To: Kevin Hilman
> Cc: linux-omap@vger.kernel.org; linux-arm-ker...@lists.infradead.org
> Subject: RE: [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain
> s
On Tuesday 29 November 2011, Tomi Valkeinen wrote:
> I don't think we need these in 3.1 stable. The omapdss driver in 3.1
> contains hacks to circumvent the HWMOD issues the patches below fix.
> These hacks were removed for 3.2.
>
> Well, the "ARM: OMAP2PLUS: DSS: Ensure DSS works correctly..." pa
On Tue, Nov 29, 2011 at 16:49:49, Kristo, Tero wrote:
[...]
> >
> > Other TI PMICs like TPS65910 also have two I2C interfaces. Since
> > the datasheets refers to these as Control (CTL) and SmartReflex (SR)
> > interfaces,
> > instead of the OMAP specific TWL_VP_SMPS_MODE, how about renaming the
On Thursday 10 November 2011 15:02:04 Jarkko Nikula wrote:
> On 11/10/2011 02:46 PM, Jarkko Nikula wrote:
> > On 11/07/2011 11:33 AM, Peter Ujfalusi wrote:
> >> If the DMA source position has been asked before the
> >> first actual data transfer has been done, the CSAC
> >> register does not contai
Hello All,
I am working with a custom hardware platform based on OMAP4460
(ES1.0). The Linux kernel that I have used with the platform is
L27.G.3 release from git.omapzoom.org
Hardware Setup:
* The OTG port of the OMAP4460 is interfaced to a High Speed USB Hub.
* It is also interfaced to a Mini
> -Original Message-
> From: Kevin Hilman [mailto:khil...@ti.com]
> Sent: Tuesday, November 08, 2011 6:28 AM
> To: Vishwanath BS
> Cc: linux-omap@vger.kernel.org; linux-arm-ker...@lists.infradead.org
> Subject: Re: [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain
> support via hwmod mux
>
On Tue, 2011-11-29 at 08:10 +0100, Bedia, Vaibhav wrote:
> > -Original Message-
> > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
> > ow...@vger.kernel.org] On Behalf Of Kristo, Tero
> > Sent: Monday, November 28, 2011 8:23 PM
> > To: linux-omap@vger.kernel.org
> > Cc: sa...@li
On Thu, 2011-11-24 at 16:29 +0100, Lars-Peter Clausen wrote:
> In ancient times it was necessary to manually initialize the bus field of an
> spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
> so we can drop the manual assignment.
>
> The patch was generated using the
AM35x MMC 2 controller has internal clock loopback setting which cannot
be utilized without this patch and thus SDIO devices connected to this
controller and depend on this setting will fail to initialize.
Signed-off-by: Igor Grinberg
---
arch/arm/mach-omap2/hsmmc.c | 42 ++
Options from struct omap_nand_platform_data are not used.
Apply options after nand_scan_ident to avoid overwrite due to
NAND_CHIPOPTIONS_MSK.
So you can pass options from platformcode
Signed-off-by: Jan Weitzel
---
drivers/mtd/nand/omap2.c |2 ++
1 files changed, 2 insertions(+), 0 deletions
On Mon, 2011-11-28 at 17:43 +0200, ext Tomi Valkeinen wrote:
> On Mon, 2011-11-28 at 11:08 +0200, Carlos Chinea wrote:
> > Hi Tomi,
> >
> > Just a question/suggestion, bellow:
> >
> > On Thu, 2011-11-24 at 15:29 +0200, ext Tomi Valkeinen wrote:
> > > Use the new lane config in dsi_set_lane_config
On Thu, 2011-11-24 at 16:06 +, Arnd Bergmann wrote:
> On Wednesday 23 November 2011, Tony Lindgren wrote:
> > Hi Arnd,
> >
> > This one has been separated out from the rest of the fixes.
>
> Pulled into the fixes branch now. I'll send out the branch
> after testing it on tomorrow's linux-next
23 matches
Mail list logo