Hi Sergei,
On Fri, Jul 19, 2013 at 1:18 PM, Sergei Shtylyov
wrote:
> Hello.
>
>
> On 07/19/2013 07:40 PM, Grygorii Strashko wrote:
>
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
>
>
Signed-off-by: Oleksand
Hello Sebastian,
I just did one more testing.
In case of iio/adc/exynos_adc.c there is a bug in the remove path.
If I fix the bug in the driver, with below patch
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -375,14 +375,14 @@ static int exynos_adc_remove(struct platfo
Hello Sebastian,
--- Original Message ---
Sender : Sebastian Andrzej Siewior
Date : Jul 19, 2013 23:44 (GMT+05:30)
Title : [PATCH] of: provide of_platform_unpopulate()
So I called of_platform_populate() on a device to get each child device
probed and on rmmod and I need to reverse its
On 7/20/2013 12:12 AM, Sebastian Andrzej Siewior wrote:
On 07/19/2013 08:33 PM, Sergei Shtylyov wrote:
Hello.
Hello,
usb: usb@4740 {
compatible = "ti,am33xx-usb";
usb0_phy: phy@47401300 {
compatible = "ti,am335x-usb-phy";
}
usb0: usb@47401000 {
On 7/20/2013 12:03 AM, Sergei Shtylyov wrote:
Hello.
On 07/19/2013 06:20 PM, Sebastian Andrzej Siewior wrote:
diff --git a/arch/arm/boot/dts/am33xx.dtsi
b/arch/arm/boot/dts/am33xx.dtsi
index 8e1248f..e3890c4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -326
Hi,
On Saturday 20 July 2013 05:20 AM, Greg KH wrote:
On Fri, Jul 19, 2013 at 12:06:01PM +0530, Kishon Vijay Abraham I wrote:
Hi,
On Friday 19 July 2013 11:59 AM, Greg KH wrote:
On Fri, Jul 19, 2013 at 11:25:44AM +0530, Kishon Vijay Abraham I wrote:
Hi,
On Friday 19 July 2013 11:13 AM, Greg
Hi,
On Friday 19 July 2013 09:24 PM, Stephen Warren wrote:
On 07/19/2013 12:36 AM, Kishon Vijay Abraham I wrote:
Hi,
On Friday 19 July 2013 11:59 AM, Greg KH wrote:
On Fri, Jul 19, 2013 at 11:25:44AM +0530, Kishon Vijay Abraham I wrote:
Hi,
On Friday 19 July 2013 11:13 AM, Greg KH wrote:
O
From: Mugunthan V N
Date: Fri, 19 Jul 2013 19:37:21 +0530
> Add support to show CPSW hardware statistics to user via ethtool get_regs
> ops so user can find if there were any error reported or the system is
> over loaded duing hagh data rate transfer.
>
> Signed-off-by: Mugunthan V N
This is n
On Fri, Jul 19, 2013 at 12:06:01PM +0530, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Friday 19 July 2013 11:59 AM, Greg KH wrote:
> > On Fri, Jul 19, 2013 at 11:25:44AM +0530, Kishon Vijay Abraham I wrote:
> >> Hi,
> >>
> >> On Friday 19 July 2013 11:13 AM, Greg KH wrote:
> >>> On Fri, Jul 19, 201
>
> The calculation of the oobfree[0].offset is wrong when using BCH8
> and elm.
>
> The layout->eccbytes is already steps*info->nand.ecc.bytes. The second
> multiplication with steps is too much and will create a value
> larger than the oob area.
>
> Fixed the calculation.
>
This is already fi
On 07/19/2013 08:33 PM, Sergei Shtylyov wrote:
> Hello.
Hello,
>> usb: usb@4740 {
>> compatible = "ti,am33xx-usb";
>>
>> usb0_phy: phy@47401300 {
>> compatible = "ti,am335x-usb-phy";
>> }
>> usb0: usb@47401000 {
>> musb0: usb@47401400 {
>> comp
On 07/19/2013 01:29 AM, Tony Lindgren wrote:
> * Stephen Warren [130718 12:27]:
>> On 07/18/2013 01:25 AM, Tony Lindgren wrote:
>>> * Stephen Warren [130717 14:21]:
On 07/16/2013 03:05 AM, Tony Lindgren wrote:
> To toggle dynamic states, let's add the optional active state in
> addit
On 07/19/2013 04:29 AM, Grygorii Strashko wrote:
> Hi Tony, Stephen
>
> On 07/19/2013 10:39 AM, Tony Lindgren wrote:
>> * Stephen Warren [130718 12:33]:
>>> On 07/18/2013 01:36 AM, Tony Lindgren wrote:
* Stephen Warren [130717 14:30]:
> On 07/16/2013 03:05 AM, Tony Lindgren wrote:
>>> .
On 07/19/2013 01:39 AM, Tony Lindgren wrote:
> * Stephen Warren [130718 12:33]:
>> On 07/18/2013 01:36 AM, Tony Lindgren wrote:
>>> * Stephen Warren [130717 14:30]:
On 07/16/2013 03:05 AM, Tony Lindgren wrote:
>> ...
Why shouldn't e.g. a pinctrl-based I2C mux also be able to do runtime
Hi,
On Sun, Jun 09, 2013 at 03:59:44AM +0200, Pavel Machek wrote:
> I'd like to convert Nokia N900 to device tree.
>
> Unfortunately, serial port is not easily available (very special cable
> would be needed, does someone know where to get one?)
One way to get one is building it yourself. I fini
Hello.
On 07/19/2013 06:20 PM, Sebastian Andrzej Siewior wrote:
diff --git a/arch/arm/boot/dts/am33xx.dtsi
b/arch/arm/boot/dts/am33xx.dtsi
index 8e1248f..e3890c4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -326,21 +326,59 @@
status = "disable
On 07/19/2013 10:24 AM, Sourav Poddar wrote:
> This patch disabled I2C/SPI/UART device initially(status = "disabled").
> This devices will only be probed, if the devices are
> present in the dts file(status = "okay").
> interrupts = <0 72 0x4>;
> ti,hwm
Hello.
On 07/19/2013 07:40 PM, Grygorii Strashko wrote:
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
So I called of_platform_populate() on a device to get each child device
probed and on rmmod and I need to reverse its doing. After a quick grep
I did what others did as well and rmmod ended in:
| Unable to handle kernel NULL pointer dereference at virtual address 0018
| PC is at release_resour
On Mon, Jul 15, 2013 at 7:02 PM, Mugunthan V N wrote:
> On 7/15/2013 9:20 PM, Mark Jackson wrote:
>> On 15/07/13 13:45, Mugunthan V N wrote:
>>> On 7/13/2013 12:55 AM, Mark Jackson wrote:
On 12/07/13 19:35, Mugunthan V N wrote:
> On 7/12/2013 7:27 PM, Mark Jackson wrote:
[snip]
On 07/19/2013 11:24 AM, Sourav Poddar wrote:
These series add support for I2C/MCSPI/UART pin control datas.
The series is done on top of Rajendra Nayak series[1](posted to the list),
which has basic dt boot enable for dra7.
These patches has been tested, along with I2C and UART patches from
wolf
On 07/19/2013 12:36 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Friday 19 July 2013 11:59 AM, Greg KH wrote:
>> On Fri, Jul 19, 2013 at 11:25:44AM +0530, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On Friday 19 July 2013 11:13 AM, Greg KH wrote:
On Fri, Jul 19, 2013 at 11:07:10AM +0530,
On 07/19/2013 05:39 PM, Sergei Shtylyov wrote:
Hello.
On 19-07-2013 13:27, Oleksandr Kozaruk wrote:
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk
---
arch/arm/boot/dts/twl6030.dtsi | 6
Add pin control datas for uart1, uart2 and uart3.
Signed-off-by: Sourav Poddar
---
arch/arm/boot/dts/dra7-evm.dts | 43
1 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index
Add pin control data for i2c1, i2c2 and i2c3.
Signed-off-by: Sourav Poddar
---
arch/arm/boot/dts/dra7-evm.dts | 47
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 9c5
These series add support for I2C/MCSPI/UART pin control datas.
The series is done on top of Rajendra Nayak series[1](posted to the list),
which has basic dt boot enable for dra7.
These patches has been tested, along with I2C and UART patches from
wolfram sang patch series[2].
[1]: http://www.s
Add pin control data for mcspi1 and mcspi2.
Signed-off-by: Sourav Poddar
---
arch/arm/boot/dts/dra7-evm.dts | 33 +
1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5591db2..d8b
This patch disabled I2C/SPI/UART device initially(status = "disabled").
This devices will only be probed, if the devices are
present in the dts file(status = "okay").
Signed-off-by: Sourav Poddar
---
arch/arm/boot/dts/dra7.dtsi | 15 +++
1 files changed, 15 insertions(+), 0 deleti
Hi
On 07/19/2013 03:33 PM, Michael Trimarchi wrote:
> Hi
>
> I'm trying to understand what is wrong here with this small
> driver.
>
> /* McBSP1 */
> OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
> OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
> OMAP4_MUX(ABE
Hello.
On 19-07-2013 13:27, Oleksandr Kozaruk wrote:
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
dif
On 07/19/2013 03:56 PM, Sergei Shtylyov wrote:
> On 19-07-2013 16:34, George Cherian wrote:
>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi
>> b/arch/arm/boot/dts/am33xx.dtsi
>> index 8e1248f..e3890c4 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -326,2
On 07/19/2013 07:10 AM, Ruslan Bilovol wrote:
The OMAP4 SoC family uses specially-designed
PMIC (power management IC) companion chip for power
management needs: TWL6030/TWL6032.
Therefore there is a typical connection of PMIC to OMAP4
so we can figure it out into separate .dtsi file
and do not du
Add support to show CPSW hardware statistics to user via ethtool get_regs
ops so user can find if there were any error reported or the system is
over loaded duing hagh data rate transfer.
Signed-off-by: Mugunthan V N
---
drivers/net/ethernet/ti/cpsw.c | 74 +
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b..45708e1 100644
--- a/arch/
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap3430-sdp.dts | 22 +++---
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts
b/arch/arm/boot/dts/omap3430-sdp.d
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda..16420ae 100644
--- a/arch/
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap3-igep0030.dts | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts
b/arch/arm/boot/dts/omap3-igep0030.dts
index 64
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap2420-h4.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/omap2420-h4.dts
b/arch/arm/boot/dts/omap2420-h4.dts
index 224c08f..34cd
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap3-igep0020.dts | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts
b/arch/arm/boot/dts/omap3-igep0020.dts
index e8
Cc: Benoît Cousson
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones
---
arch/arm/boot/dts/omap5.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..be58604 100644
--- a/a
Hello.
On 19-07-2013 16:34, George Cherian wrote:
Add phy nodes for AM33XX platform and split the musb nodes
per instance.
Signed-off-by: Sebastian Andrzej Siewior
Signed-off-by: George Cherian
---
arch/arm/boot/dts/am33xx.dtsi | 68 +--
1 file ch
On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> Remove usb phy control module access from platform glue.
> The same is now done using am phy driver and phy-omap-control.
> Adapt the driver to the split dt nodes.
This patch should be split.
>
> Signed-off-by: Sebastian Andrzej Siewior
Hi,
On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> Add phy nodes for AM33XX platform and split the musb nodes
> per instance.
>
> Signed-off-by: Sebastian Andrzej Siewior
> Signed-off-by: George Cherian
> ---
> arch/arm/boot/dts/am33xx.dtsi | 68
> +--
Hi
I'm trying to understand what is wrong here with this small
driver.
/* McBSP1 */
OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
OMAP_PULL_ENA)
Hi,
On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> Adds phy driver support for am33xx platform, the host/device
> peripheral controller shall get this phy object to control the phy
> operations.
>
> Signed-off-by: George Cherian
> ---
> drivers/phy/Kconfig | 12 +++
> driver
Hi,
On Fri, Jul 19, 2013 at 04:03:47PM +0300, Illia Smyrnov wrote:
> From: Illia Smyrnov
>
> Remove unnecessary IRQ enabling/disabling for certain keyboard events.
>
> Signed-off-by: Illia Smyrnov
> ---
> drivers/input/keyboard/omap4-keypad.c | 15 ---
> 1 files changed, 4 inser
Hi,
On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> on/off USB PHY for AM335X
>
> Add APIs to
> -power on/off USB PHY for AM335X
> -enable/disable PHY wakeup.
>
> This API will be called from phy-am-usb driver.
>
> Signed-off-by: George Cherian
> ---
> drivers/usb/phy
Hi,
On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> This patch series adds phy support for AM335X platform.
> This patch series is based on Generic PHY framework [1].
There are some comments on the generic PHY framework. So you might have to
adapt it once those comments are fixed.
Thank
On 07/19/2013 04:03 PM, Illia Smyrnov wrote:
From: Illia Smyrnov
Replace unclear hardcoded values with bit field and remove
unnecessary IRQ enabling/disabling.
Based on top of v3.10-rc1.
Sorry, it is typo here. Based on v3.11-rc1.
Tested on OMAP4 SDP.
Illia Smyrnov (2):
Input: omap-ke
On 07/16/2013 07:19 PM, Stefan Roese wrote:
> Hi Roger,
>
> On 07/16/2013 04:37 PM, Roger Quadros wrote:
>> On 07/15/2013 11:24 AM, Stefan Roese wrote:
>>> On 07/15/2013 10:16 AM, Roger Quadros wrote:
>> I can only test on beagle-xm (which is also rev. C2) with integrated
>> SMSC ethernet
From: Illia Smyrnov
Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro,
remove unused defines.
Signed-off-by: Illia Smyrnov
---
drivers/input/keyboard/omap4-keypad.c | 25 +++--
1 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/
From: Illia Smyrnov
Remove unnecessary IRQ enabling/disabling for certain keyboard events.
Signed-off-by: Illia Smyrnov
---
drivers/input/keyboard/omap4-keypad.c | 15 ---
1 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/input/keyboard/omap4-keypad.c
b/dri
From: Illia Smyrnov
Replace unclear hardcoded values with bit field and remove
unnecessary IRQ enabling/disabling.
Based on top of v3.10-rc1.
Tested on OMAP4 SDP.
Illia Smyrnov (2):
Input: omap-keypad: Cleanup - use bitfiled instead of hardcoded
values
Input: omap-keypad: Cleanup - re
Adds phy driver support for am33xx platform, the host/device
peripheral controller shall get this phy object to control the phy
operations.
Signed-off-by: George Cherian
---
drivers/phy/Kconfig | 12 +++
drivers/phy/Makefile | 1 +
drivers/phy/phy-am-usb.c | 222 +
on/off USB PHY for AM335X
Add APIs to
-power on/off USB PHY for AM335X
-enable/disable PHY wakeup.
This API will be called from phy-am-usb driver.
Signed-off-by: George Cherian
---
drivers/usb/phy/phy-omap-control.c | 67
include/linux
Remove usb phy control module access from platform glue.
The same is now done using am phy driver and phy-omap-control.
Adapt the driver to the split dt nodes.
Signed-off-by: Sebastian Andrzej Siewior
Signed-off-by: George Cherian
---
drivers/usb/musb/musb_dsps.c | 150 -
Add phy nodes for AM33XX platform and split the musb nodes
per instance.
Signed-off-by: Sebastian Andrzej Siewior
Signed-off-by: George Cherian
---
arch/arm/boot/dts/am33xx.dtsi | 68 +--
1 file changed, 53 insertions(+), 15 deletions(-)
diff --git a/arc
This patch series adds phy support for AM335X platform.
This patch series is based on Generic PHY framework [1].
This series has
- adds dual musb instances support for am335x platform
- adds phy-am-usb driver used in AM platforms
- adds OTG callbacks
- add
Hi,
On Fri, Jul 19, 2013 at 05:18:47PM +0530, Sourav Poddar wrote:
> On Thursday 18 July 2013 04:54 PM, Felipe Balbi wrote:
> >On Thu, Jul 18, 2013 at 04:48:41PM +0530, Sourav Poddar wrote:
> +static void qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
> +{
> + const u8 *t
The OMAP4 SoC family uses specially-designed
PMIC (power management IC) companion chip for power
management needs: TWL6030/TWL6032.
Therefore there is a typical connection of PMIC to OMAP4
so we can figure it out into separate .dtsi file
and do not duplicate over board-specific files.
Tested on OM
Hi Mark,
On Thursday 18 July 2013 04:12 PM, Mark Brown wrote:
On Thu, Jul 18, 2013 at 03:31:26PM +0530, Sourav Poddar wrote:
QSPI is a kind of spi module that allows single,
dual and quad read access to external spi devices. The module
has a memory mapped interface which provide direct interfac
Hi Tomi
On Fri, Jun 28, 2013 at 10:58 AM, Tomi Valkeinen wrote:
> On 25/06/13 14:32, Ruslan Bilovol wrote:
>> The OMAP4 Blaze Tablet is TI OMAP4 processor-based
>> development platform in a tablet formfactor.
>> The platform contains many of the features found in
>> present-day handsets (such as
Hi Felipe,
On Thursday 18 July 2013 04:54 PM, Felipe Balbi wrote:
On Thu, Jul 18, 2013 at 04:48:41PM +0530, Sourav Poddar wrote:
+static void qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+{
+ const u8 *txbuf;
+ int wlen, count;
+
+ count = t->len;
+ txbuf
Hi Stephen,
On Thursday 18 July 2013 10:55:56 Stephen Warren wrote:
> On 07/17/2013 04:54 PM, Laurent Pinchart wrote:
> > Hello,
> >
> > Here's a small patch set that replaces PWM polarity numerical constants
> > with macros in DT.
>
> The series,
> Reviewed-by: Stephen Warren
>
> I'm (very ve
On 07/19/2013 12:49 PM, Roger Quadros wrote:
On 07/19/2013 01:36 PM, Arend van Spriel wrote:
On 07/18/2013 10:59 AM, Tony Lindgren wrote:
Then for the SDIO with device tree, take a look at the following
patches:
[PATCH 0/3] WLAN support for omap4 when booted with devicetree
http://comments.gma
* Arend van Spriel [130719 03:43]:
> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> >Then for the SDIO with device tree, take a look at the following
> >patches:
> >
> >[PATCH 0/3] WLAN support for omap4 when booted with devicetree
> >http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
On 07/19/2013 01:36 PM, Arend van Spriel wrote:
> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>> Then for the SDIO with device tree, take a look at the following
>> patches:
>>
>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>> http://comments.gmane.org/gmane.linux.ports.arm.omap
Hi,
On Friday 19 July 2013 05:43 AM, Nishanth Menon wrote:
> On Thu, Jul 18, 2013 at 6:39 PM, Santosh Shilimkar
> wrote:
>> On Thursday 18 July 2013 02:56 PM, Nishanth Menon wrote:
>>> On 07/18/2013 11:43 AM, Sricharan R wrote:
Some socs have a large number of interrupts/dma requests to serv
On Friday 19 July 2013 12:47 PM, Tony Lindgren wrote:
>> On Thursday 18 July 2013 02:56 PM, Nishanth Menon wrote:
>>
>> Since the cross-bar is not limited t0 IRQ lines and applicable for
>> DMA request lines as well, making it IRQ chip doesn't make sense. Its
>> not typical pin control functionalit
The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
tags/omap-for-v3.11/fixes-against-rc1
for you to fetch changes up
On 07/18/2013 10:59 AM, Tony Lindgren wrote:
Then for the SDIO with device tree, take a look at the following
patches:
[PATCH 0/3] WLAN support for omap4 when booted with devicetree
http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
I have been looking at the pandaboard patch in the s
Hi Tony, Stephen
On 07/19/2013 10:39 AM, Tony Lindgren wrote:
* Stephen Warren [130718 12:33]:
On 07/18/2013 01:36 AM, Tony Lindgren wrote:
* Stephen Warren [130717 14:30]:
On 07/16/2013 03:05 AM, Tony Lindgren wrote:
...
Why shouldn't e.g. a pinctrl-based I2C mux also be able to do runti
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC,
known also as Phoenix and PhoenixLite.
The TWL6030 and TWL6032 have GPADC with 17 and 19 channels
respectively. Some channels have current source and are used for
measuring voltage drop on resistive load for detecting battery ID
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/tw
Hello,
v6 - addressed comments about trim bits, checkpatch clean up
v5 - gpadc DT node renamed from "gpadc" to generic "adc", added
temperature channels; raw code is corracted with calibration
data.
v4 - addressed comments: fixed style violation, bug in freeing memory,
added comment
The calculation of the oobfree[0].offset is wrong when using BCH8
and elm.
The layout->eccbytes is already steps*info->nand.ecc.bytes. The second
multiplication with steps is too much and will create a value
larger than the oob area.
Fixed the calculation.
Signed-off-by: Teresa Gámez
---
drive
Felipe,
On Tuesday 16 July 2013 06:12 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Jul 16, 2013 at 11:22:38AM +0530, Kishon Vijay Abraham I wrote:
>> Tony,
>>
>> On Monday 08 July 2013 04:44 PM, Kishon Vijay Abraham I wrote:
>>> This series fixes the USB enumeration issue caused because of the contr
Hello Lars,
On Thu, Jul 18, 2013 at 12:48 PM, Lars-Peter Clausen wrote:
> On 07/18/2013 10:36 AM, Oleksandr Kozaruk wrote:
>> Hello Lars,
>>
>> On Wed, Jul 17, 2013 at 9:04 PM, Lars-Peter Clausen wrote:
+static int twl6032_calibration(struct twl6030_gpadc_data *gpadc)
+{
+ int
* Stephen Warren [130718 12:33]:
> On 07/18/2013 01:36 AM, Tony Lindgren wrote:
> > * Stephen Warren [130717 14:30]:
> >> On 07/16/2013 03:05 AM, Tony Lindgren wrote:
> ...
> >> Why shouldn't e.g. a pinctrl-based I2C mux also be able to do runtime
> >> PM? Does the mux setting select which states
* Stephen Warren [130718 12:27]:
> On 07/18/2013 01:25 AM, Tony Lindgren wrote:
> > * Stephen Warren [130717 14:21]:
> >> On 07/16/2013 03:05 AM, Tony Lindgren wrote:
> >>> To toggle dynamic states, let's add the optional active state in
> >>> addition to the static default state. Then if the opt
> On Thursday 18 July 2013 02:56 PM, Nishanth Menon wrote:
>
> Since the cross-bar is not limited t0 IRQ lines and applicable for
> DMA request lines as well, making it IRQ chip doesn't make sense. Its
> not typical pin control functionality either but at least that framework
> is much closer to c
81 matches
Mail list logo
