On 03/01/14 00:12, Tony Lindgren wrote:
* Igor Grinberg grinb...@compulab.co.il [140223 04:33]:
ping x2!
Thanks applying into omap-for-v3.15/dt finally.
Thanks!
Is it OK to remove the board-cm-*.c files for v3.15?
Hmmm
I thought we will have a transition release with both ways and
* Igor Grinberg grinb...@compulab.co.il [140302 06:19]:
On 03/01/14 00:12, Tony Lindgren wrote:
* Igor Grinberg grinb...@compulab.co.il [140223 04:33]:
ping x2!
Thanks applying into omap-for-v3.15/dt finally.
Thanks!
Is it OK to remove the board-cm-*.c files for v3.15?
Hi Sourav,
On 21/02/2014 15:28, Sourav Poddar wrote:
Hi Benoit,
On Tuesday 14 January 2014 07:51 PM, Benoit Cousson wrote:
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
Benoit,
On Thursday 19 December 2013 06:03 PM, Sourav
* Sørensen, Stefan stefan.soren...@spectralink.com [140301 02:02]:
On Fri, 2014-02-28 at 09:11 -0800, Tony Lindgren wrote:
* Stefan Sørensen stefan.soren...@spectralink.com [140224 02:12]:
Currently INTC interrupts are handled using handle_level_irq which
will acknowledge the interrupt
* Marek Belisko ma...@goldelico.com [140301 06:02]:
This updated series fix issue with proper gta04 booting in 3.14 kernel
and add various devices to devicetree.
Changes from V1:
- removed fixes which was merged to 3.14 already
- add bma180 accelerometer + booting fix
Marek Belisko (2):
Hi Peter,
Thank you for the patch.
On Friday 28 February 2014 18:36:07 Peter Meerwald wrote:
use the correct name in the comment describing function
omap3isp_module_sync_is_stopping()
isp_isr() never returned IRQ_NONE, remove the comment saying so
Signed-off-by: Peter Meerwald
* Gupta, Pekon pe...@ti.com [140212 20:30]:
Hi Benoit, Tony,
From: Gupta, Pekon
This patch-set adds and updates parallel NAND support on following TI
platforms
- AM335x (am335x-evm)
- DRA7xx (dra7-evm
- AM43xx (am43X-epos-evm)
In addition, following OMAP2+/GPMC patch is also
* Pekon Gupta pe...@ti.com [140205 05:31]:
From: Minal Shah minal.s...@ti.com
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,37 @@
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
;
};
+
+
Hi Archit,
On 17/12/2013 11:02, Archit Taneja wrote:
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices.
DMM only requires address and irq information.
Add documentation for the DMM bindings.
Originally worked on by Andy Gross andy...@gmail.com
Cc: Andy Gross
On Sat, Mar 1, 2014 at 9:14 PM, Ohad Ben-Cohen o...@wizery.com wrote:
On Mon, Feb 10, 2014 at 9:14 PM, Suman Anna s-a...@ti.com wrote:
On 02/07/2014 04:49 PM, Bjorn Andersson wrote:
It seems to be standard practice to pass the error value back to the
consumer, so you should
return
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks,
Benoît
The following changes since commit 6d0abeca3242a88cab8232e4acd7e2bf088f3bc2:
Linux 3.14-rc3 (2014-02-16 13:30:25 -0800)
are available in the git repository at:
* Benoit Cousson bcous...@baylibre.com [140302 12:45]:
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks pulling into omap-for-v3.15/dt.
Tony
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to
The following changes since commit 4b41636878ee32d4c45a49de7749abca9721bd6a:
ARM: OMAP3: Fix pinctrl interrupts for core2 (2014-02-27 15:35:48 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
tags/omap-for-v3.14/fixes-dt-rc4
* Tony Lindgren t...@atomide.com [140302 15:55]:
The following changes since commit 6d0abeca3242a88cab8232e4acd7e2bf088f3bc2:
Linux 3.14-rc3 (2014-02-16 13:30:25 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
On Fri, Feb 28, 2014 at 11:08:16AM +0100, Pavel Machek wrote:
On Fri 2014-02-28 08:37:27, Jenny Tc wrote:
On Thu, Feb 27, 2014 at 09:18:57PM +0100, Linus Walleij wrote:
On Tue, Feb 4, 2014 at 6:12 AM, Jenny TC jenny...@intel.com wrote:
+static inline bool __is_battery_full
+
On Mon, Feb 24, 2014 at 08:38:07AM -0600, Nishanth Menon wrote:
Intent here is to allow drivers such as cpufreq-cpu0 to be reused on
platforms such as TI's OMAP derivatives, and other SoCs which differ
only by the sequence involved in voltage scale operations. So, this
patch provides a
On Wed, Feb 26, 2014 at 11:14:26AM +0200, Jyri Sarha wrote:
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -74,6 +74,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_TLV320AIC23 if I2C
select SND_SOC_TLV320AIC26 if SPI_MASTER
select SND_SOC_TLV320AIC32X4 if
Tony,
On 02/28/2014 05:00 PM, Tony Lindgren wrote:
* Suman Anna s-a...@ti.com [140228 12:46]:
Hi Joerg, Tony,
This is an updated series of the OMAP IOMMU DT adaptation intended
for 3.15 merge window, addressing the comments from the v2 series.
This series is rebased onto 3.14-rc4, and the
On Sunday 02 March 2014 11:00 PM, Benoit Cousson wrote:
Hi Sourav,
On 21/02/2014 15:28, Sourav Poddar wrote:
Hi Benoit,
On Tuesday 14 January 2014 07:51 PM, Benoit Cousson wrote:
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
On 3/1/2014 3:29 AM, Tony Lindgren wrote:
* Satish Patel satish.pa...@ti.com [140109 00:13]:
On 1/6/2014 5:42 PM, Satish Patel wrote:
Patch set includes clock and HWMOD entries for AM43x's USIM modoule.
Note: I am in process of mainlining usim driver.
Satish Patel (2):
ARM: dts:
On Wed, Feb 26, 2014 at 11:14:25AM +0200, Jyri Sarha wrote:
This commit adds a bare bones driver support for TLV320AIC31XX family
audio codecs. The driver adds basic stereo playback trough headphone
and speaker outputs and mono capture trough microphone inputs.
Always CC maintainers on patches
On Wed, Feb 26, 2014 at 11:14:27AM +0200, Jyri Sarha wrote:
+- ai31xx-micbias-vg - MicBias Voltage required.
+ 1 - MICBIAS output is powered to 2.0V,
+ 2 - MICBIAS output is powered to 2.5V,
+ 3 - MICBIAS output is connected to AVDD,
+ If this node is not mentioned or if the
On 03/03/2014 08:09 AM, Satish Patel wrote:
On 3/1/2014 3:29 AM, Tony Lindgren wrote:
* Satish Patel satish.pa...@ti.com [140109 00:13]:
On 1/6/2014 5:42 PM, Satish Patel wrote:
Patch set includes clock and HWMOD entries for AM43x's USIM modoule.
Note: I am in process of mainlining usim
On 01/06/2014 02:12 PM, Satish Patel wrote:
Clock entries support for TI's USIM - Smart card controller of AM43xx platform
USIM controller has multiple sources for debounce and functional clock.Entry
for each source has been added.
This patch is using unsupported/old version of DT data layout
The minimum width and height for VPE input/output was kept as 128 pixels. VPE
doesn't have a constraint on the image height, it requires the image width to
be atleast 16 bytes.
Change the minimum supported dimensions to 32x32. This allows us to de-interlace
qcif content. A smaller image size than
Some parameters of the VPE descriptors were understood incorrectly. They are now
fixed. The fixes are explained as follows:
- When adding an inbound data descriptor to the VPDMA descriptor list, we intend
to use c_rect as the cropped region fetched by VPDMA. Therefore, c_rect-width
shouldn't
The video_device struct is currently embedded in the driver data struct vpe_dev.
A vpe_dev instance is allocated by the driver, and the memory for the vfd is a
part of this struct.
The v4l2 core, however, manages the removal of the vfd region, through the
video_device's .release() op, which
vpe fops(vpe_open in particular) should be called only when VPDMA firmware
is loaded. File operations on the video device are possible the moment it is
registered.
Currently, we register the video device for VPE at driver probe, after calling
a vpdma helper to initialize VPDMA and load firmware.
Add crop ioctl ops. For VPE, cropping only makes sense with the input to VPE, or
the V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE buffer type.
For the CAPTURE type, a S_CROP ioctl results in setting the crop region as the
whole image itself, hence making crop dimensions same as the pix dimensions.
Setting
This patch set mainly consists of minor fixes for the VPE driver. These fixes
ensure the following:
- The VPE module can be inserted and removed successively.
- Make sure that smaller resolutions like qcif work correctly.
- Prevent race condition between firmware loading and an open call to the
For OMAP and DRA7x, we generally allocate video and graphics buffers through
omapdrm since the corresponding omap-gem driver provides DMM-Tiler backed
contiguous buffers. omapdrm is a dma-buf exporter. These buffers are used by
other drivers in the video pipeline.
Add VB2_DMABUF flag to the
VPE has a ctrl parameter which decides how many mem to mem transactions the
active job from the job queue can perform.
The driver's job_ready() made sure that the number of ready source buffers are
sufficient for the job to execute successfully. But it didn't make sure if
there are sufficient
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For VPE, cropping only makes sense with the input to VPE,
or
the V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE buffer type.
For the CAPTURE type, a S_CROP ioctl results in setting the crop region as the
whole image itself,
33 matches
Mail list logo
