On 02/28/2014 08:33 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [140228 10:21]:
Hmm, some clock node is broken, might be missing a name or parent
name for some reason. Can you try to boot with DEBUG enabled so you
get pr_debug:s out and see which clock is being initialized during
Hi,
On Monday 03 March 2014 01:20 PM, Hans Verkuil wrote:
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For VPE, cropping only makes sense with the input to VPE, or
the V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE buffer type.
For the CAPTURE type, a S_CROP ioctl results
On 02/27/2014 10:07 PM, Nishanth Menon wrote:
+devicetree list.
On 02/27/2014 02:48 PM, Florian Vaussard wrote:
On 02/27/2014 09:38 PM, Nishanth Menon wrote:
On 02/27/2014 02:30 PM, Florian Vaussard wrote:
Currently, the TWL4030 PMIC does not completely poweroff the processor.
Commit
Add the AT24C01 EEPROM node populated on most Gumstix expansion board.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
Use the timings provided by omap-gpmc-smsc9221. This does not change
the timings, but it avoids code duplication.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 30 +++---
1 file changed, 3 insertions(+), 27
MMC2 is used by the on-board WiFi module populated on some boards
(based on Marvell Libertas 8688 SDIO). The Bluetooth is connected
to UART2.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 8
Some devices (SMSC9217, SMSC9218 and SMSC9221 at least) have better
timings, allowing a higher transfer speed. Create a common file
with these timings.
Performance results with iperf:
- omap-gpmc-smsc911x.dtsi = 54.9 Mbps
- omap-gpmc-smsc9221.dtsi = 92.7 Mbps
Signed-off-by: Florian Vaussard
Add missing pinctrl entries for:
- i2c1
- mmc1
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo.dtsi | 40 +-
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
Hello Tony, Benoit,
This is the third version of my Overo series. No major changes since v2,
I just dropped the patch related to the ti,use_poweroff binding, and
will address this issue later.
Most patches are pretty obvious. Patch 5 adds some specific timings for
LAN9221 into a generic file. By
Add the High-Speed USB PHY.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 16 ++
arch/arm/boot/dts/omap3-overo-tobi.dts | 16 ++
arch/arm/boot/dts/omap3-overo.dtsi | 44
3
Add missing pinctrl entries:
- i2c3
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
Hi Tony,
On 03/01/2014 12:56 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [140227 06:21]:
Hi,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It also does some cleanup with respect to DT clock binding
for the mfd/omap-usb-host driver.
Please
Hi,
I am using the latest stable 3.4.80 kernel with some changes to get the EMAC
Phy to initialise correctly after a suspend/resume. The platform is AM3517
with most of the system working nice and smoothly. I have 1 issue though and
need some advice/help to get the system to use the USB hub I
Hi Tony, Benoit,
On 02/24/2014 06:07 PM, Florian Vaussard wrote:
Gumstix DuoVero is an OMAP4430-based Computer On Module.
Parlor is one of the available expansion board.
Tested features:
- GPMC ethernet
- HSUSB2 and OTG
- Audio out
- WiFi and Bluetooth (w2cbw0015 SDIO module)
- LED and
Hi!
Just to convey that is_battery_full is a local function and not generic.
You
can find similar usage in power_supply_core.c
(__power_supply_changed_work)
and in other drivers. Isn't it advised to have __ prefixes?
It is static; everybody sees it is local. __ prefix
From: Schuyler Patton spat...@ti.com
This patch fixes a CPDMA RX Descriptor leak that occurs after taking
the interface down when the CPSW is in Dual MAC mode. Previously
the CPSW_ALE port was left open up which causes packets to be received
and processed by the RX interrupt handler and were
Hi Florian,
On 03/03/2014 11:34 AM, Florian Vaussard wrote:
Add the High-Speed USB PHY.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 16 ++
arch/arm/boot/dts/omap3-overo-tobi.dts | 16 ++
On Sun, 2014-03-02 at 09:37 -0800, Tony Lindgren wrote:
* Sørensen, Stefan stefan.soren...@spectralink.com [140301 02:02]:
On Fri, 2014-02-28 at 09:11 -0800, Tony Lindgren wrote:
* Stefan Sørensen stefan.soren...@spectralink.com [140224 02:12]:
Currently INTC interrupts are handled using
Hi Marc,
On 03/03/2014 12:04 PM, Marc Murphy wrote:
Hi,
I am using the latest stable 3.4.80 kernel with some changes to get the EMAC
Phy to initialise correctly after a suspend/resume. The platform is AM3517
with most of the system working nice and smoothly. I have 1 issue though and
On 02/28/2014 05:07 PM, Nishanth Menon wrote:
On 02/28/2014 08:26 AM, Peter Ujfalusi wrote:
On 02/28/2014 03:30 PM, Nishanth Menon wrote:
TWL6030 can do 3.3MHz by default and there are no speed registers to
configure.
According to the datasheet the speed of twl6030 is limited to 2.4MHz. I
Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3
driver in drivers/usb/phy to drivers/phy and also renamed the file to
phy-ti-pipe3 since this same driver will be used for SATA PHY and
PCIE PHY.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
and Documentation/devicetree/bindings/phy/ti-phy.txt.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
arch/arm/boot/dts/omap5.dtsi |
No functional change. Moved omap_usb.h from linux/usb/ to linux/phy/.
Also removed the unused members of struct omap_usb (after phy-omap-pipe3
started using it's own header file)
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/phy/phy-omap-usb2.c |2 +-
Added support for optional PHY in dwc3 as not all SoCs having PHYs for DWC3
should be programmed. While this can be considered as a temporary fix,
a long term solution would be to add 'nop' PHY for platforms that does
not have programmable PHY.
Adapted DWC3 and USB3 PHY to use Generic PHY
Now that omap-usb2 is adapted to the new generic PHY framework,
*set_suspend* ops can be removed from omap-usb2 driver.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
drivers/phy/phy-omap-usb2.c |
Since PHYs for dwc3 is optional (not all SoCs having PHYs for DWC3
should be programmed), do not return from probe if the USB PHY library
returns -ENODEV as that indicates the platform does not have a
programmable PHY.
While this can be considered as a temporary fix, a long term solution
would be
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().
However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted
omapdss has its own video-timings struct, but we want to move the common
videomode.
The first step is to change the omapdss's pixelclock unit from kHz to
Hz. Also, omapdss uses pixel_clock field name, whereas the common
videomode uses pixelclock field name. This patch changes the field
name also,
Hi Archit,
From: Archit Taneja [mailto:arc...@ti.com]
Sent: Monday, March 03, 2014 8:33 AM
The minimum width and height for VPE input/output was kept as 128
pixels. VPE doesn't have a constraint on the image height, it requires
the image width to be atleast 16 bytes.
16 bytes - shouldn't
On 03/03/14 13:06, Roger Quadros wrote:
Hi Marc,
On 03/03/2014 12:04 PM, Marc Murphy wrote:
Hi,
I am using the latest stable 3.4.80 kernel with some changes to get the EMAC
Phy to initialise correctly after a suspend/resume. The platform is AM3517
with most of the system working nice
Hi Archit,
From: Archit Taneja [mailto:arc...@ti.com]
Sent: Monday, March 03, 2014 9:26 AM
Hi,
On Monday 03 March 2014 01:20 PM, Hans Verkuil wrote:
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For VPE, cropping only makes sense with the
input
to
Hi Kishon,
Which tree are these patches based on?
cheers,
-roger
On 03/03/2014 01:38 PM, Kishon Vijay Abraham I wrote:
Added support for optional PHY in dwc3 as not all SoCs having PHYs for DWC3
should be programmed. While this can be considered as a temporary fix,
a long term solution would
Hi,
On Monday 03 March 2014 05:51 PM, Kamil Debski wrote:
Hi Archit,
From: Archit Taneja [mailto:arc...@ti.com]
Sent: Monday, March 03, 2014 9:26 AM
Hi,
On Monday 03 March 2014 01:20 PM, Hans Verkuil wrote:
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For
Roger,
On Monday 03 March 2014 05:51 PM, Roger Quadros wrote:
Hi Kishon,
Which tree are these patches based on?
mainline + Felipe's testing/next + Revert usb: dwc3: core: enable
Suspend bit for USB2/3 PHYs + Revert usb: dwc3: preparation for
adapting dwc3 to generic phy framework
Thanks
Hi,
On Monday 03 March 2014 05:44 PM, Kamil Debski wrote:
Hi Archit,
From: Archit Taneja [mailto:arc...@ti.com]
Sent: Monday, March 03, 2014 8:33 AM
The minimum width and height for VPE input/output was kept as 128
pixels. VPE doesn't have a constraint on the image height, it requires
the
Hi Roger,
On 03/03/2014 12:03 PM, Roger Quadros wrote:
Hi Florian,
On 03/03/2014 11:34 AM, Florian Vaussard wrote:
Add the High-Speed USB PHY.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 16 ++
On 03/03/2014 02:48 PM, Florian Vaussard wrote:
Hi Roger,
On 03/03/2014 12:03 PM, Roger Quadros wrote:
Hi Florian,
On 03/03/2014 11:34 AM, Florian Vaussard wrote:
Add the High-Speed USB PHY.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
---
Add the compatible ti,am437x-dwc3 for dwc3 glue driver.
Signed-off-by: George Cherian george.cher...@ti.com
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt
Enable
- ocp2scp
- USB PHY control module
- USB PHY
- dwc3_omap
- USB
for am43x-epos-evm
Signed-off-by: George Cherian george.cher...@ti.com
---
arch/arm/boot/dts/am43x-epos-evm.dts | 44
1 file changed, 44
Enable
- ocp2scp
- USB PHY control module
- USB PHY
- dwc3_omap
- USB
for am437x-gp-evm
Signed-off-by: George Cherian george.cher...@ti.com
---
arch/arm/boot/dts/am437x-gp-evm.dts | 44 +
1 file changed, 44 insertions(+)
Add nodes for 2 instances each of
- ocp2scp
- USB PHY control module
- USB PHY
- dwc3_omap
- USB
for AM43xx.
Signed-off-by: George Cherian george.cher...@ti.com
---
arch/arm/boot/dts/am4372.dtsi | 99 +++
1 file
Add USB reference clock data
Signed-off-by: George Cherian george.cher...@ti.com
---
arch/arm/boot/dts/am43xx-clocks.dtsi | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi
b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 142009c..506d036
The patch series adds USB dt nodes for am43xx epos and gp evm
Boot tested with Benoit's for_3.15 + following patches
https://patchwork.kernel.org/patch/3600821/
https://patchwork.kernel.org/patch/3600831/
https://patchwork.kernel.org/patch/3600851/
https://patchwork.kernel.org/patch/3600841/
Hi Igor
The Hub is a Microchip USB2513B-AEZG and is connected to EHCI controller port
via the DUP_P and DUP_N pins. There is a reset applied to the chip at power on.
Regards
Marc
From: Igor Grinberg [grinb...@compulab.co.il]
Sent: 03 March 2014 12:16
On Wednesday 26 February 2014 10:31 PM, Tony Lindgren wrote:
* Balaji T K balaj...@ti.com [140219 07:00]:
Enable REGULATOR_PBIAS needed for SD card on most OMAPs.
Signed-off-by: Balaji T K balaj...@ti.com
I belive this is the only one missing my ack:
Acked-by: Tony Lindgren t...@atomide.com
From: Nishanth Menon n...@ti.com
Add ABB device nodes for DRA7 family of devices. Data is based on
DRA7 Technical Reference Manual revision I (Sept 2013)
Signed-off-by: Nishanth Menon n...@ti.com
Signed-off-by: Mugunthan V N mugunthan...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 132
From: Sricharan R r.sricha...@ti.com
There is a IRQ crossbar device in the soc, which maps the
irq requests from the peripherals to the mpu interrupt
controller's inputs. The gic provides the support for such
IPs in the form of routable-irqs. So adding the property
here to gic node.
Cc: Benoit
From: Sricharan R r.sricha...@ti.com
Now with the crossbar IP in picture, the peripherals do not have the
fixed interrupt lines. Instead they rely on the crossbar irqchip to
allocate and map a free interrupt line to its crossbar input. So replacing
all the peripheral interrupt numbers with its
From: Andrii.Tseglytskyi andrii.tseglyts...@ti.com
Add ABB device nodes for OMAP443x family of devices. abb_iva is
populated, but disabled as it is not used on current OMAP443x family,
but the node is used on OMAP446x family. Data is based on OMAP443x
Technical Reference Manual revision AN (April
From: Sricharan R r.sricha...@ti.com
This adds the irq crossbar device node.
There is a IRQ crossbar device in the soc, which
maps the irq requests from the peripherals to the
mpu interrupt controller's inputs. The Peripheral irq
requests are connected to only one crossbar
input and the output
Benoit/Tony
Here I am send all the pending dt patches that can go into 3.15 merge window,
all the patches were already posted to mailing list and has beed reviewed.
I have rebased the patches on top of
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
omap-for-v3.15/dt
and
From: Andrii.Tseglytskyi andrii.tseglyts...@ti.com
Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).
[n...@ti.com: co-developer]
Signed-off-by: Nishanth Menon n...@ti.com
Signed-off-by: Andrii.Tseglytskyi
From: Balaji T K balaj...@ti.com
Add card detect gpio for SD card slot
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Mugunthan V N mugunthan...@ti.com
---
arch/arm/boot/dts/am335x-evm.dts | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts
From: Balaji T K balaj...@ti.com
Add card detect gpio for SD card slot and include dt gpio header.
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Mugunthan V N mugunthan...@ti.com
---
arch/arm/boot/dts/am4372.dtsi| 1 +
arch/arm/boot/dts/am43x-epos-evm.dts | 9 +
2
Benoit/Tony
Here I am send all the pending patches that can go into 3.15 merge window,
all the patches were already posted to mailing list and has beed reviewed.
Here I am rebasing the patches on top of
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
omap-for-v3.15/dt
and
From: Balaji T K balaj...@ti.com
enable sd card slot on am437x-gp-evm
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Mugunthan V N mugunthan...@ti.com
---
arch/arm/boot/dts/am437x-gp-evm.dts | 27 +++
1 file changed, 27 insertions(+)
diff --git
Limit .power_on() and .power_off() to just control the
PHY power and not the DPLL. The DPLL will be enabled
in .init() and idled in .exit().
Don't reprogram the DPLL if it has been already locked
by the bootloader. This fixes a problem with SATA, where
it fails if SATA was used by the bootloader.
From: Balaji T K balaj...@ti.com
Add support for sata.
[Roger Q] Clean up.
CC: Benoit Cousson bcous...@baylibre.com
CC: Tony Lindgren t...@atomide.com
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 40
From: Balaji T K balaj...@ti.com
Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY.
[Roger Q] Clean up.
CC: Benoit Cousson bcous...@baylibre.com
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 39
From: Nikhil Devshatwar nikhil...@ti.com
Add hwmods for ocp2scp3 and sata modules.
[Roger Q] Clean up.
CC: Benoit Cousson bcous...@baylibre.com
CC: Paul Walmsley p...@pwsan.com
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Nikhil Devshatwar nikhil...@ti.com
Signed-off-by: Roger
Due to Errata i783, SATA breaks if its DPLL is idled. The recommeded
workaround to issue a softreset to the SATA controller doesn't seem to
work. Here we just prevent SATA DPLL from Idling and hence avoid
the issue altogether.
Signed-off-by: Roger Quadros rog...@ti.com
---
Move omap-control binding information to the right location.
Signed-off-by: Roger Quadros rog...@ti.com
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 25 ++
Documentation/devicetree/bindings/usb/omap-usb.txt | 24 -
2 files changed, 25
From: Kishon Vijay Abraham I kis...@ti.com
Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.
Signed-off-by:
USB and SATA DPLLs need different settings. Provide
the SATA DPLL settings and use the proper DPLL settings
based on device tree node's compatible_id.
Update the DT binding information.
Signed-off-by: Roger Quadros rog...@ti.com
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 3 +-
The OMAP_USB2 and OMAP_PIP3 phy devices will not be
detected if the OMAP_OCP2SCP driver is not present.
So select it.
Signed-off-by: Roger Quadros rog...@ti.com
---
drivers/phy/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index
Hi,
This series adds SATA support for OMAP5 uevm and DRA7-evm boards.
- Cleans up the ti-pipe3 PHY driver
- Adds SATA DPLL support to ti-pipe3 PHY driver
- Adds SATA nodes to hwmod and SoC DT data
Patches are based on [1].
To test SATA you will also need [2].
[1] -
The pipe3-phy driver expects certain named clocks.
Provide the necessary clocks.
CC: Benoît Cousson bcous...@baylibre.com
CC: Tony Lindgren t...@atomide.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git
As this driver is no longer USB specific, use generic clock names.
- Fix PLL_SD_SHIFT from 9 to 10
- As optclk and wkupclk may not be always required, don't bail out
if they aren't available.
- Don't separate prepare/unprepare clock from enable/disable. This
ensures optimal power savings.
From: Keshava Munegowda keshava_mgo...@ti.com
Create hwmods for ocp2scp3 and sata modules.
[Roger Q] Clean up.
CC: Benoit Cousson bcous...@baylibre.com
CC: Paul Walmsley p...@pwsan.com
CC: Tony Lindgren t...@atomide.com
Signed-off-by: Balaji T K balaj...@ti.com
Signed-off-by: Roger Quadros
Hi,
On Mon, Mar 03, 2014 at 05:08:09PM +0530, Kishon Vijay Abraham I wrote:
Added support for optional PHY in dwc3 as not all SoCs having PHYs for DWC3
should be programmed. While this can be considered as a temporary fix,
a long term solution would be to add 'nop' PHY for platforms that does
* Sørensen, Stefan stefan.soren...@spectralink.com [140303 03:08]:
On Sun, 2014-03-02 at 09:37 -0800, Tony Lindgren wrote:
* Sørensen, Stefan stefan.soren...@spectralink.com [140301 02:02]:
On Fri, 2014-02-28 at 09:11 -0800, Tony Lindgren wrote:
* Stefan Sørensen
On 03/01/2014 08:08 PM, Aaro Koskinen wrote:
Since 3.14-rc1 only DT boot has been supported on N810. Make a minimal
fix to retain functionality. This file should be properly converted
to DT in longer term.
Signed-off-by: Aaro Koskinen aaro.koski...@iki.fi
---
sound/soc/omap/n810.c | 4
Ohad,
On 03/02/2014 02:19 PM, Bjorn Andersson wrote:
On Sat, Mar 1, 2014 at 9:14 PM, Ohad Ben-Cohen o...@wizery.com wrote:
On Mon, Feb 10, 2014 at 9:14 PM, Suman Anna s-a...@ti.com wrote:
On 02/07/2014 04:49 PM, Bjorn Andersson wrote:
It seems to be standard practice to pass the error value
* Tero Kristo t-kri...@ti.com [140303 00:20]:
On 02/28/2014 08:33 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [140228 10:21]:
Hmm, some clock node is broken, might be missing a name or parent
name for some reason. Can you try to boot with DEBUG enabled so you
get pr_debug:s out
* Roger Quadros rog...@ti.com [140303 07:11]:
The OMAP_USB2 and OMAP_PIP3 phy devices will not be
detected if the OMAP_OCP2SCP driver is not present.
So select it.
Selecting drivers like this will easily lead into missing
dependencies. Especially it's bad for tristate driver
options that
On 03/03/2014 08:46 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [140303 00:20]:
On 02/28/2014 08:33 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [140228 10:21]:
Hmm, some clock node is broken, might be missing a name or parent
name for some reason. Can you try to boot
* Roger Quadros rog...@ti.com [140303 07:10]:
Move omap-control binding information to the right location.
Signed-off-by: Roger Quadros rog...@ti.com
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 25
++
Documentation/devicetree/bindings/usb/omap-usb.txt |
I'm working on porting an ARM board from linux-3.10 to linux-3.12 (now
the latest LTS kernel).
I found that Ethernet controller on the board no longer comes up on linux-3.12.
I was able to bisect the issue I'm having to the following commit:
45f0a85c8258741d11bda25c0a5669c06267204a is the
On 02/03/2014 23:17, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140302 12:45]:
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks pulling into omap-for-v3.15/dt.
Thank you Tony.
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux
On 28/02/2014 23:17, Tony Lindgren wrote:
* Jack Mitchell m...@embed.me.uk [140122 03:09]:
From: Jack Mitchell j...@embed.me.uk
Devicetree include file for setting up the am335x mcasp bus, i2c-2
bus, and audio codec required for a functioning BeagleBone Audio Cape.
Signed-off-by: Jack
From: Mugunthan V N mugunthan...@ti.com
Date: Mon, 3 Mar 2014 16:19:06 +0530
From: Schuyler Patton spat...@ti.com
This patch fixes a CPDMA RX Descriptor leak that occurs after taking
the interface down when the CPSW is in Dual MAC mode. Previously
the CPSW_ALE port was left open up which
This should probably be done implicitly through mmc_of_parse(), but that
doesn't play well along with the multi-slot model the hsmmc driver
features. Hence, for now, do it manually. The properties are already
documented in Documentation/devicetree/bindings/mmc/mmc.txt.
Signed-off-by: Daniel Mack
Since 3.14-rc1 only DT boot has been supported on N810, so this
file fails to init. Make a minimal fix to retain functionality.
This file should be properly converted to DT in longer term.
There seems to be still other unresolved issues with N810 audio support,
but this patch is needed at minimum
On Monday, March 03, 2014 02:41:01 PM Jon Ringle wrote:
I'm working on porting an ARM board from linux-3.10 to linux-3.12 (now
the latest LTS kernel).
I found that Ethernet controller on the board no longer comes up on
linux-3.12.
I was able to bisect the issue I'm having to the following
On Mon, Mar 3, 2014 at 6:43 PM, Rafael J. Wysocki r...@rjwysocki.net wrote:
On Monday, March 03, 2014 02:41:01 PM Jon Ringle wrote:
I'm working on porting an ARM board from linux-3.10 to linux-3.12 (now
the latest LTS kernel).
I found that Ethernet controller on the board no longer comes up on
On Tue, Mar 04, 2014 at 12:45:18AM +0200, Aaro Koskinen wrote:
Since 3.14-rc1 only DT boot has been supported on N810, so this
file fails to init. Make a minimal fix to retain functionality.
This file should be properly converted to DT in longer term.
Applied, please remember to use subject
On 03/03/14 16:11, Marc Murphy wrote:
Hi Igor
The Hub is a Microchip USB2513B-AEZG and is connected to EHCI controller port
via the DUP_P and DUP_N pins. There is a reset applied to the chip at power
on.
If the reset signal is sw controllable, you might want to toggle it
before the
v1: introduced feature as a framework within power supply class driver with
separate files for battid framework and charging framework
v2: fixed review comments, moved macros and inline functions to power_supply.h
v3: moved the feature as a separate driver, combined battid framework and
This patch introduces BQ24261 charger driver. The driver makes use of power
supply charging driver to setup charging. So the driver does hardware
abstraction and handles h/w specific corner cases. The charging logic resides
with power supply charging driver
Signed-off-by: Jenny TC
Add new power supply properties for input current, charge termination
current, min and max temperature
POWER_SUPPLY_PROP_TEMP_MIN - minimum operatable temperature
POWER_SUPPLY_PROP_TEMP_MAX - maximum operatable temperature
POWER_SUPPLY_PROP_INLMT - input current limit programmed by charger.
As per Product Safety Engineering (PSE) specification for battery charging, the
battery characteristics and thereby the charging rates can vary on different
temperature zones. This patch introduces a PSE compliant charging algorithm with
maintenance charging support. The algorithm can be selected
Hi Hans,
On Monday 03 March 2014 01:20 PM, Hans Verkuil wrote:
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For VPE, cropping only makes sense with the input to VPE, or
the V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE buffer type.
For the CAPTURE type, a S_CROP ioctl
On 03/04/2014 08:38 AM, Archit Taneja wrote:
Hi Hans,
On Monday 03 March 2014 01:20 PM, Hans Verkuil wrote:
Hi Archit!
On 03/03/2014 08:33 AM, Archit Taneja wrote:
Add crop ioctl ops. For VPE, cropping only makes sense with the input to
VPE, or
the V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE
93 matches
Mail list logo
