Hi Pavel, Sakari,
On 11/17/2014 03:58 PM, Sakari Ailus wrote:
Hi Pavel,
On Sun, Nov 16, 2014 at 08:59:28AM +0100, Pavel Machek wrote:
For device tree people: Yes, I know I'll have to create file in
documentation, but does the binding below look acceptable?
I'll clean up driver code a bit
Hi Tony,
When I try to do suspend from userspace, I get better results and it
seems that all domain been put to RET or OFF but on checking power
state time it still shows 0. Do you know why ?
usbhost_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm
Hi,
In coninuity to my previous message, thse is the log for time in state
0-state 6:
0
~ # cat /sys/devices/system/cpu/cpu0/cpuidle/state0/time
761849079
~ # cat /sys/devices/system/cpu/cpu0/cpuidle/state1/time
0
~ # cat /sys/devices/system/cpu/cpu0/cpuidle/state2/time
0
~ # cat
On Tue 2014-11-18 09:09:09, Jacek Anaszewski wrote:
Hi Pavel, Sakari,
On 11/17/2014 03:58 PM, Sakari Ailus wrote:
Hi Pavel,
On Sun, Nov 16, 2014 at 08:59:28AM +0100, Pavel Machek wrote:
For device tree people: Yes, I know I'll have to create file in
documentation, but does the binding
On Tue 2014-11-18 09:09:09, Jacek Anaszewski wrote:
Hi Pavel, Sakari,
On 11/17/2014 03:58 PM, Sakari Ailus wrote:
Hi Pavel,
On Sun, Nov 16, 2014 at 08:59:28AM +0100, Pavel Machek wrote:
For device tree people: Yes, I know I'll have to create file in
documentation, but does the binding
Hi Tony,
2014-11-17 19:04 GMT+01:00 Tony Lindgren t...@atomide.com:
* Enric Balletbo Serra eballe...@gmail.com [141117 07:15]:
Hi all,
I'm trying to use the USB OTG driver of OMAP3 processor in HOST mode
when it's configured in dual role mode (CONFIG_USB_MUSB_DUAL_ROLE=y)
The test case
Add ADS7846 touchscreen support.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 57 +++
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
Fix comment style
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index b074673..e4c0c56
Add display alias for TV out.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-sbc-t3517.dts |1 +
arch/arm/boot/dts/omap3-sbc-t3530.dts |1 +
arch/arm/boot/dts/omap3-sbc-t3730.dts |1 +
3 files changed, 3 insertions(+), 0 deletions(-)
diff --git
Add at24 EEPROM chip support.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index
Add at24 EEPROM chip support.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-sb-t35.dtsi | 20
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi
b/arch/arm/boot/dts/omap3-sb-t35.dtsi
Add twl4030 matrtix keypad support.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 17 +
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
Add audio related DT nodes
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 16
arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 14 ++
arch/arm/boot/dts/omap3-sb-t35.dtsi | 16
3 files changed, 46
Add support for more SBC-T3x single board computers features:
* CM-T3x CoM and SB-T35 baseboard EEPROMs
* TV out
* Touchscreen
* CM-T3x30 audio
* CM-T3x30 keypad
Dmitry Lifshitz (9):
ARM: dts: cm-t3x: cleanup comments indentation
ARM: dts: cm-t3x: add ADS7846 touchscreen support
ARM:
Add TV out support.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 24
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index
Remove ADS7846 touchscreen pdata quirk for CM-T3x CoMs
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
arch/arm/mach-omap2/pdata-quirks.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c
b/arch/arm/mach-omap2/pdata-quirks.c
On Mon, Nov 17, 2014 at 02:15:01PM +0100, SF Markus Elfring wrote:
From: Markus Elfring elfr...@users.sourceforge.net
Date: Mon, 17 Nov 2014 14:05:27 +0100
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
On 11/18/2014 09:46 AM, Pavel Machek wrote:
On Tue 2014-11-18 09:09:09, Jacek Anaszewski wrote:
Hi Pavel, Sakari,
On 11/17/2014 03:58 PM, Sakari Ailus wrote:
Hi Pavel,
On Sun, Nov 16, 2014 at 08:59:28AM +0100, Pavel Machek wrote:
For device tree people: Yes, I know I'll have to create file
2014-11-18 10:02 GMT+01:00 Enric Balletbo Serra eballe...@gmail.com:
Hi Tony,
2014-11-17 19:04 GMT+01:00 Tony Lindgren t...@atomide.com:
* Enric Balletbo Serra eballe...@gmail.com [141117 07:15]:
Hi all,
I'm trying to use the USB OTG driver of OMAP3 processor in HOST mode
when it's
Hello.
On 11/18/2014 8:01 AM, Lokesh Vutla wrote:
Add node for RTC.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
[n...@ti.com: update with rtc crossbar number]
Signed-off-by: Nishanth Menon n...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 9 +
1 file changed, 9 insertions(+)
I've already submitted a patch [1] that updates leds common bindings.
I hasn't been merged yet, as the related LED Flash class patch [2]
still needs some indicator leds related discussion [3].
I think this is a good moment to discuss the flash related led common
bindings.
Part of
On 11/18/2014 12:32 PM, Pavel Machek wrote:
I've already submitted a patch [1] that updates leds common bindings.
I hasn't been merged yet, as the related LED Flash class patch [2]
still needs some indicator leds related discussion [3].
I think this is a good moment to discuss the flash
Hi!
@@ -19,5 +30,10 @@ Examples:
system-status {
label = Status;
linux,default-trigger = heartbeat;
+ iout-torch = 500 500;
+ iout-flash = 1000 1000;
+ iout-indicator = 100 100;
+ flash-timeout = 1000;
+
...
};
I don't get
On Fri, 14 Nov 2014, Vignesh R wrote:
In one shot mode, sequencer automatically disables all enabled steps at
the end of each cycle. (both ADC steps and TSC steps) Hence these steps
need not be saved in reg_se_cache for clearing these steps at a later
stage.
Also, when ADC wakes up Sequencer
Hello,
we need gpio chip selects in the spi-omap2-mcspi.c driver. I have seen
that we are not the first ones, but there is no implementation in mainline.
Is there a reason for this (not possible, problems)?
Otherwise, can somebody provide some pointers where to start to
implement those?
* Enric Balletbo Serra eballe...@gmail.com [141118 01:04]:
Hi Tony,
2014-11-17 19:04 GMT+01:00 Tony Lindgren t...@atomide.com:
Just tested v3.18-rc5 with beagleboard xm, and the host mode
enumerates the devices, then may fail with insufficient bus power
at least for the WLAN device I
* Ran Shalit ransha...@gmail.com [141118 00:26]:
In coninuity to my previous message, thse is the log for time in state
0-state 6:
On Tue, Nov 18, 2014 at 10:21 AM, Ran Shalit ransha...@gmail.com wrote:
When I try to do suspend from userspace, I get better results and it
seems that
On Mon, Nov 17, 2014 at 03:41:53PM +0100, Wolfram Sang wrote:
submit write request to General Call Address. In that case ISR could
not correctly handle RDR (or XRDY, ARDY, or that ever). Thats becase
i2c-omap driver doesn't correctly handle i2c-controller's slave mode.
right, Linux
Hi Pavel,
On 11/18/2014 02:21 PM, Pavel Machek wrote:
Hi!
@@ -19,5 +30,10 @@ Examples:
system-status {
label = Status;
linux,default-trigger = heartbeat;
+ iout-torch = 500 500;
+ iout-flash = 1000 1000;
+ iout-indicator =
right, Linux doesn't support being the slave. That's also a missing
feature, not a bug.
This is going to change. I sent out RFC patches for slave support [1]
and will send V1 this week. This won't affect your driver, though,
unless you implement the backend into it.
Just to
Still, as of now we can't consider what Alexander mentions a bug. Good
to get it sorted out, but not -rc material.
Actually, I focused on fixing issues then i2c-omap acts as master in a multi
master environment.
And must say, that current linux/mainline driver work perfectly with minor
On Tue, Nov 18, 2014 at 07:31:44PM +0300, Alexander Kochetkov wrote:
Still, as of now we can't consider what Alexander mentions a bug. Good
to get it sorted out, but not -rc material.
Actually, I focused on fixing issues then i2c-omap acts as master in a
multi master environment.
but
On Mon, Nov 17, 2014 at 08:41:57PM +0400, Alexander Kochetkov wrote:
commit 1d7afc95946487945cc7f5019b41255b72224b70 (i2c: omap: ack IRQ in parts)
changed the interrupt handler to complete transfers without clearing
XRDY (AL case) and ARDY (NACK case) flags. XRDY or ARDY interrupts will be
Hi!
If the hardware LED changes with one that needs different current, the
block for the adp1653 stays the same, but white LED block should be
updated with different value.
I think that you are talking about sub nodes. Indeed I am leaning
towards this type of design.
I think I am :-).
I
commit 1d7afc95946487945cc7f5019b41255b72224b70 (i2c: omap: ack IRQ in parts)
changed the interrupt handler to complete transfers without clearing
XRDY (AL case) and ARDY (NACK case) flags. XRDY or ARDY interrupts will be
fired again. As a result, ISR keep processing transfer after it was already
On Tue, Nov 18, 2014 at 02:30:05PM +, Lee Jones wrote:
On Fri, 14 Nov 2014, Vignesh R wrote:
In one shot mode, sequencer automatically disables all enabled steps at
the end of each cycle. (both ADC steps and TSC steps) Hence these steps
need not be saved in reg_se_cache for clearing
Without this, sound on AM437x Starter Kit will
not work.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/configs/omap2plus_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/omap2plus_defconfig
b/arch/arm/configs/omap2plus_defconfig
index c893487..a5abc67
None of these drivers are known to be used on
any platform supported by omap2plus_defconfig,
by removing them we get a slight smaller kernel.
Signed-off-by: Felipe Balbi ba...@ti.com
---
Depends on [1]
[1] http://marc.info/?l=linux-omapm=141632534806371w=2
arch/arm/configs/omap2plus_defconfig
AM437x Starter Kit ships with EDT FT5306 touchscreen
device. By enabling the driver we make sure touchscreen
will work out of the box.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git
AM437x devices have a DWC3 IP inside of them.
The host side implementation of DWC3 is XHCI
compliant. By enabling XHCI driver, we get
the USB host port on AM437x Starter Kit working
out of the box.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file
now that we have the new vendor-less edt-ft5x06
i2c_device_id, we can use it
Cc: devicet...@vger.kernel.org
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/imx28-tx28.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx28-tx28.dts
now that we have the new vendor-less edt-ft5x06
i2c_device_id, we can use it
Cc: devicet...@vger.kernel.org
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
i2c devices match against struct i2c_device_id
even for CONFIG_OF case, so adding a struct of_device_id
doesn't change anything. As a result, currently, edt-ft5x06
will not autoprobe if built as a module.
To fix the issue and still maintain backwards compatibility
with all DTS files currently in
now that we have the new vendor-less edt-ft5x06
i2c_device_id, we can use it
Cc: devicet...@vger.kernel.org
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/imx53-tx53-x03x.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts
now that we have the new vendor-less edt-ft5306
i2c_device_id, we can use it
Cc: devicet...@vger.kernel.org
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts
Many of AM335x and AM437x hook backlight to
one of these two devices. By enabling their
drivers we make sure pwm-backlight can do
its thing.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/configs/omap2plus_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git
On Mon 2014-11-17 07:06:17, Tony Lindgren wrote:
* Pali Rohár pali.ro...@gmail.com [141117 07:03]:
On Monday 17 November 2014 15:55:46 Tony Lindgren wrote:
There's nothing stopping us from initializing the camera code
from pdata-quirks.c for now to keep it working. Certainly the
Dear Sir
Did your website get hit by Google Penguin update on October 17th 2014? What
basically is Google Penguin Update? It is actually a code name for Google
algorithm which aims at decreasing your websites search engine rankings that
violate Googles guidelines by using black hat SEO
Hi Felipe,
On Tue, Nov 18, 2014 at 12:07:04PM -0600, Felipe Balbi wrote:
i2c devices match against struct i2c_device_id
even for CONFIG_OF case, so adding a struct of_device_id
doesn't change anything. As a result, currently, edt-ft5x06
will not autoprobe if built as a module.
Why doe snot
On Tue, Nov 18, 2014 at 10:38:47AM -0800, Dmitry Torokhov wrote:
Hi Felipe,
On Tue, Nov 18, 2014 at 12:07:04PM -0600, Felipe Balbi wrote:
i2c devices match against struct i2c_device_id
even for CONFIG_OF case, so adding a struct of_device_id
doesn't change anything. As a result,
Hi,
On Tue, Nov 18, 2014 at 01:09:22PM -0600, Felipe Balbi wrote:
On Tue, Nov 18, 2014 at 10:38:47AM -0800, Dmitry Torokhov wrote:
Hi Felipe,
On Tue, Nov 18, 2014 at 12:07:04PM -0600, Felipe Balbi wrote:
i2c devices match against struct i2c_device_id
even for CONFIG_OF case, so
Because with OF we can pass more specific
compatible flags (such as edt-ft5306) instead
of generic edt-ft5x06, when i2c-core's
of_i2c_register_devices() tries to request_module(),
it'll request it with a non-existent specific module
alias.
In order to have this driver autoprobing again, we
just
On Tue, Nov 18, 2014 at 01:27:42PM -0600, Felipe Balbi wrote:
Because with OF we can pass more specific
compatible flags (such as edt-ft5306) instead
of generic edt-ft5x06, when i2c-core's
of_i2c_register_devices() tries to request_module(),
it'll request it with a non-existent specific
On Tue, Nov 18, 2014 at 01:27:42PM -0600, Felipe Balbi wrote:
Because with OF we can pass more specific
compatible flags (such as edt-ft5306) instead
of generic edt-ft5x06, when i2c-core's
of_i2c_register_devices() tries to request_module(),
it'll request it with a non-existent specific
On Tue, Nov 18, 2014 at 11:59:02AM -0800, Dmitry Torokhov wrote:
On Tue, Nov 18, 2014 at 01:27:42PM -0600, Felipe Balbi wrote:
Because with OF we can pass more specific
compatible flags (such as edt-ft5306) instead
of generic edt-ft5x06, when i2c-core's
of_i2c_register_devices() tries to
On Tue, Nov 18, 2014 at 02:03:40PM -0600, Felipe Balbi wrote:
On Tue, Nov 18, 2014 at 11:59:02AM -0800, Dmitry Torokhov wrote:
On Tue, Nov 18, 2014 at 01:27:42PM -0600, Felipe Balbi wrote:
Because with OF we can pass more specific
compatible flags (such as edt-ft5306) instead
of
On Tue, Nov 18, 2014 at 12:14:21PM -0800, Dmitry Torokhov wrote:
On Tue, Nov 18, 2014 at 02:03:40PM -0600, Felipe Balbi wrote:
On Tue, Nov 18, 2014 at 11:59:02AM -0800, Dmitry Torokhov wrote:
On Tue, Nov 18, 2014 at 01:27:42PM -0600, Felipe Balbi wrote:
Because with OF we can pass more
On 11/13/2014 01:22 PM, Roger Quadros wrote:
Hi Tony,
These patches add CAN support for am33xx, am43xx and dra7 platforms.
They can go in independent of [1] but depend on [1] for functionality.
Tested on am335x-evm, am437x-gp-evm and dra7-evm.
NOTE:
- for DCAN to work on DRA7 we need
Hi Tony,
I eventually managed to enter retention :))
I did the following changes:
1. added CONFIG_SUSPEND (though I do not use suspend/resume but only
cpuidle, it seems to have some effect, I think without it the wakeup in
console did not function correctly.
2. enabled sleep for all uart
On Wed, 12 Nov 2014 16:31:54 -0600 Felipe Balbi ba...@ti.com wrote:
On Wed, Nov 12, 2014 at 01:20:27PM -0800, Tony Lindgren wrote:
* Dr. H. Nikolaus Schaller h...@goldelico.com [141112 12:28]:
Am 12.11.2014 um 16:45 schrieb Grazvydas Ignotas nota...@gmail.com:
On Tue, Nov 4, 2014 at
60 matches
Mail list logo