RM: OMAP2+: Remove module references from IOMMU machine layer
Tony Lindgren (10):
ARM: OMAP2+: Clean up omap4_local_timer_init
ARM: OMAP2+: Fix dm814x DT_MACHINE_START
ARM: OMAP2+: Fix scm compatible for dm814x
ARM: OMAP2+: Add minimal clockdomains for dm814x
ARM: OMAP2+: Ad
.
Tony Lindgren (5):
ARM: dts: Add minimal dm814x support
ARM: dts: Add minimal clocks for dm814x
ARM: dts: Add minimal dts support for dm8148-evm
ARM: dts: Add minimal support for HP T410
ARM: OMAP2+: Add custom abort handler for t410
arch/arm/boot/dts/Makefile
* Sekhar Nori [150723 23:44]:
> Hi Greg,
>
> On Tuesday 14 July 2015 06:19 PM, Tony Lindgren wrote:
> > * Peter Hurley [150714 05:24]:
> >> On 07/14/2015 04:02 AM, Sekhar Nori wrote:
> >>> This series works around "Advisory 21" as documented in
&g
the
> capability to idle the UART module when DMA is used.
Looks like this won't cause any merge conflicts for v4.3,
please feel free to apply along with the serial driver
patches:
Acked-by: Tony Lindgren
--
To unsubscribe from this list: send the line "unsubscribe linux-om
* Suman Anna [150723 09:25]:
> Hi Tony,
>
> On 07/23/2015 02:24 AM, Tony Lindgren wrote:
> > * Suman Anna [150722 09:25]:
> >> On 07/22/2015 12:26 AM, Tony Lindgren wrote:
> >>>
> >>> I don't like using syscon for tinkering directly with SoC
Hi,
Can you guys please pull this into arm soc fixes for v4.2 directly?
I don't have other omap fixes queued at this point.
Regards,
Tony
* Paul Walmsley [150723 07:00]:
> Hi Tony,
>
> The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
>
> Linux 4.2-rc1 (2015-07-
* Paul Walmsley [150723 08:01]:
> Hi Tony,
>
> The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
>
> Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending.git
> ta
gt; can be removed now, so that the IBE bit is always set.
OK makes sense to me. It's best that you upload these into
Russell's patch tracking system after waiting for some more
comments. Please feel free to add for the whole series:
Acked-by: Tony Lindgren
--
To unsubscribe from this lis
* Suman Anna [150722 09:25]:
> On 07/22/2015 12:26 AM, Tony Lindgren wrote:
> >
> > I don't like using syscon for tinkering directly with SoC registers.
>
> This is not a SoC-level register, but a register within a sub-module of
> the DSP processor sub-system.
* Olof Johansson [150722 16:45]:
> On Wed, Jul 22, 2015 at 02:41:18AM -0700, Tony Lindgren wrote:
> > The following changes since commit bc0195aad0daa2ad5b0d76cce22b167bc3435590:
> >
> > Linux 4.2-rc2 (2015-07-12 15:10:30 -0700)
> >
> > are available in the
The following changes since commit 80edaaead3687b47ba3760588306937439ebd7bd:
ARM: dts: am335x-evm: Switch using simple-audio-card for audio support
(2015-07-14 04:28:25 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
tags/omap-
at we can
drop the legacy booting support assuming no unexpected issues
are found.
Tony Lindgren (2):
ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo
ARM: OMAP2+: Remove legacy booting support for Pandora
The following changes since commit bc0195aad0daa2ad5b0d76cce22b167bc3435590:
Linux 4.2-rc2 (2015-07-12 15:10:30 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
omap-for-v4.3/defconfig
for you to fetch changes up to da104dc845af
* Suman Anna [150721 16:58]:
> --- a/drivers/iommu/omap-iommu.c
> +++ b/drivers/iommu/omap-iommu.c
> @@ -26,6 +26,8 @@
> #include
> #include
> #include
> +#include
> +#include
>
> #include
>
> @@ -112,6 +114,18 @@ void omap_iommu_restore_ctx(struct device *dev)
> }
> EXPORT_SYMBOL_
* Grazvydas Ignotas [150720 18:14]:
> - add pandora specific compatible name
> - fix mmc2 card detect polarity
> - fix mmc1 and mmc2 write protect polarity
> - disable write protect pins because of production issue and add an
> explanation why they are disabled
> - fix NAND partition name to ref
* Nishanth Menon [150720 14:00]:
> On 07/20/2015 04:07 PM, Aparna Balasubramanian wrote:
> > Palmas on OMAP5uevm has support for power button, so enable it.
> >
> > Signed-off-by: Aparna Balasubramanian
> > ---
> >
> > Based on kernel tag 4.2.0-rc1 and test result log is at
> > http://pastebin.
* Sekhar Nori [150720 04:15]:
> Add serialN aliases for all 6 UART instances on
> the AM437x SoC so each board's .dts file does not
> have to define its own aliases.
>
> Remove the alias added for am437x-gp-evm.dts now
> that we have the aliases defined in am4372.dtsi
> file.
Applying both into
* Teresa Remmet [150716 01:36]:
> phyCORE-AM335x is a SoM (System on Module) containing
> a AM335x SOC. The module can be connected to different
> carrier boards.
>
> Some hardware parts are configurable on the phyCORE-AM335x.
> So they are disabled on default in this som dtsi file.
> They will b
* Fugang Duan [150716 01:36]:
> From: Fugang Duan
>
> In tsc2046 touch driver, the values such as ti,x-min is defined as a u16
> value. the driver use API of_property_read_u16() read the value. For these
> u16 value, the dts entry should be like:
> property = /bits/ 16 <0x5000>;
> This des
* Roger Quadros [150708 03:45]:
> Hi,
>
> Enables dual-role feaure on supported boards.
>
> Depends on
> [1] - core USB DRD support -
> http://thread.gmane.org/gmane.linux.kernel/1991413
> [2] - dwc3 DRD support -
> http://thread.gmane.org/gmane.linux.usb.general/127890
Is this series safe to
* Dmitry Torokhov [150719 23:36]:
> On Sun, Jul 19, 2015 at 11:05:07PM -0700, Tony Lindgren wrote:
> > * Vignesh R [150719 21:51]:
> > > On 7/18/2015 3:21 AM, Dmitry Torokhov wrote:
> > > >
> > > > I wonder if driver core should be responsible for clear
* Dave Gerlach [150717 13:59]:
> +
> +/* Public functions */
...
> +EXPORT_SYMBOL_GPL(wkup_m3_set_mem_type);
> +EXPORT_SYMBOL_GPL(wkup_m3_set_resume_address);
> +EXPORT_SYMBOL_GPL(wkup_m3_request_pm_status);
> +EXPORT_SYMBOL_GPL(wkup_m3_prepare_low_power);
> +EXPORT_SYMBOL_GPL(wkup_m3_finish_low_p
* Vignesh R [150719 21:53]:
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data
> *pixcir_parse_dt(struct device *dev)
> dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>
> + pdata->wakeirq = of_irq_get
* Vignesh R [150719 21:51]:
> On 7/18/2015 3:21 AM, Dmitry Torokhov wrote:
> >
> > I wonder if driver core should be responsible for clearing wake irq and
> > also for clearing wakeup flag.
> >
>
> AFAICU, wakeup flag is deleted when struct device is deleted, hence,
> device_init_wakeup() call
* Grazvydas Ignotas [150717 04:24]:
> On Fri, Jul 17, 2015 at 7:54 AM, Tony Lindgren wrote:
> > * Tony Lindgren [150716 09:28]:
> >> * Grazvydas Ignotas [150716 07:16]:
> >> > Hi,
> >> >
> >> > On Thu, Jul 16, 2015 at 2:59 PM, Tony Lindgr
* Sebastian Reichel [150717 01:29]:
> Hi,
>
> On Thu, Jul 16, 2015 at 04:59:09AM -0700, Tony Lindgren wrote:
> > I think we can drop these now. This just leaves n900 and ldp with
> > n900 pending patches for legacy proc support.
>
> So I guess n900 board file removal
* Russell King - ARM Linux [150716 06:56]:
> On Wed, Jul 15, 2015 at 11:48:54PM -0700, Tony Lindgren wrote:
> > Hi,
> >
> > * Russell King [150715 10:50]:
> > > Restore the OMAP4 barrier behaviour using the new implementation which
> > > allows multipla
* Stephen Boyd [150716 11:27]:
> On 07/16/2015 02:37 AM, Tony Lindgren wrote:
> >
> >Here's this patch updated with the above removed.
> >
>
> Ok. I fixed up Mike's email in case he wants to look at it. Looks fine to me
> though.
OK thanks for updat
* Tony Lindgren [150716 09:28]:
> * Grazvydas Ignotas [150716 07:16]:
> > Hi,
> >
> > On Thu, Jul 16, 2015 at 2:59 PM, Tony Lindgren wrote:
> > > We've been moving all omap2+ based systems to boot in device tree only
> > > mode for a few year
* Paul Walmsley [150716 07:09]:
> On Wed, 15 Jul 2015, Tony Lindgren wrote:
>
> > * Paul Walmsley [150715 22:58]:
> > > Hello Markus
> > >
> > > On Tue, 30 Jun 2015, SF Markus Elfring wrote:
> > >
> > > > From: Markus Elfring
> &
* Grazvydas Ignotas [150716 07:16]:
> Hi,
>
> On Thu, Jul 16, 2015 at 2:59 PM, Tony Lindgren wrote:
> > We've been moving all omap2+ based systems to boot in device tree only
> > mode for a few years now. Only omap3 has legacy booting support
> > remaining
* Laurent Pinchart [150716 05:57]:
> The OMAP3 ISP is now fully supported in DT, remove its instantiation
> from C code.
Please feel to queue this along with the second patch in this series,
this should not cause any merge conflicts:
Acked-by: Tony Lindgren
--
To unsubscribe from thi
Hi all,
I think we can drop these now. This just leaves n900 and ldp with
n900 pending patches for legacy proc support.
Regards,
Tony
Tony Lindgren (2):
ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo
ARM: OMAP2+: Remove legacy booting support for Pandora
arch/arm/mach
e run
into some unexpected issues that are not trivial to fix for the
device tree based booting.
Cc: Signed-off-by: Grazvydas Ignotas
Signed-off-by: Tony Lindgren
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-omap3pandora.c | 633 ---
2 fil
e run
into some unexpected issues that are not trivial to fix for the
device tree based booting.
Cc: Tim Nordell
Signed-off-by: Tony Lindgren
---
arch/arm/mach-omap2/Kconfig| 20 ---
arch/arm/mach-omap2/Makefile | 2 -
arch/arm/mach-omap2/board-oma
* Tony Lindgren [150604 15:30]:
> * Stephen Boyd [150604 11:44]:
> > On 06/03, Tony Lindgren wrote:
> > > +#include
> >
> > Is list.h used?
...
> > > +static const char *enable_init_clks[] = {
> > > +};
> >
> > de
* Tony Lindgren [150603 12:39]:
> * Sergei Shtylyov [150603 12:10]:
> > Hello.
> >
> > On 06/03/2015 07:23 PM, Tony Lindgren wrote:
> >
> > >Fix scrm compatible for dm814x.
> >
> >So, scrm...
> >
> > >Cc: Matthijs van Duin
&
* Sekhar Nori [150708 08:30]:
> Hi Tony,
>
> Here are some defconfig updates for commonly
> used drivers on platforms supported by
> omap2plus_defconfig.
>
> Applies to v4.2-rc1
>
> Thanks,
> Sekhar
>
> Sekhar Nori (4):
> ARM: omap2plus_defconfig: enable support for TI ADC
> ARM: omap2plus
* Suman Anna [150710 13:45]:
> The OMAP IOMMU driver has been adapted to the IOMMU framework
> for a while now, and it no longer supports being built as a
> module. Cleanup all the module related references both from
> the code and in the build.
>
> While at it, also relocate a comment around the
* Nishanth Menon [150715 06:44]:
> On 07/15/2015 01:26 AM, Tony Lindgren wrote:
> > * Nishanth Menon [150622 08:14]:
> >> DRA7 uses OMAP5 IO table at the moment. This is purely spurious since
> >> the OMAP5 and DRA7 register maps are different in many aspects.
> >
Hi,
* Russell King [150715 10:50]:
> Restore the OMAP4 barrier behaviour using the new implementation which
> allows multiplatform systems to hook into the mb() and wmb() ARM
> implementations to perform any necessary additional barrier maintanence.
I'm getthing this with omap2plus_defconfig wit
* Paul Walmsley [150715 22:58]:
> Hello Markus
>
> On Tue, 30 Jun 2015, SF Markus Elfring wrote:
>
> > From: Markus Elfring
> > Date: Tue, 30 Jun 2015 14:00:16 +0200
> >
> > The functions clk_disable(), of_node_put() and omap_device_delete() test
> > whether their argument is NULL and then ret
* Kishon Vijay Abraham I [150715 04:24]:
> Hi Roger,
>
> On Tuesday 02 June 2015 02:40 PM, Roger Quadros wrote:
> > This register is required to be passed to the SATA PHY driver
> > to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
> >
> > Signed-off-by: Roger Quadros
> > S
ARM: dts: AM33xx: Update and move wkup_m3 node to l4 node
ARM: dts: AM4372: Add the wkupm3 rproc node
Tony Lindgren (1):
ARM: dts: Remove L3 compatible value for dm816x
Vignesh R (1):
ARM: dts: DRA72: switch to cpsw slave0 for ethernet
arch/arm/boot/dt
The following changes since commit bc0195aad0daa2ad5b0d76cce22b167bc3435590:
Linux 4.2-rc2 (2015-07-12 15:10:30 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
tags/omap-for-v4.2/fixes-rc2-v2
for you to fetch changes up to 9908
* Mark Rutland [150715 02:27]:
> On Mon, Jul 13, 2015 at 09:41:41PM +0100, Felipe Balbi wrote:
> > According to DRA7x TRM section 4.3.5 Realtime Counter (Master Counter),
> > the realtime counter sits in the Wakeup Always-On Power domain.
> > Furthermore, the counter will automatically switch the
Felipe,
* Tony Lindgren [150119 13:41]:
> * Felipe Balbi [150102 10:50]:
> > as it turns out the current IRQ number will
> > *always* be available from SIR register which
> > renders the reads of PENDING registers as plain
> > unnecessary overhead.
> >
> >
* SF Markus Elfring [150625 04:35]:
> From: Markus Elfring
> Date: Thu, 25 Jun 2015 13:24:35 +0200
>
> Some functions which release a system resource tolerate the passing
> of a null pointer. I do not see a need because of this fact
> that a function caller repeats a corresponding check.
>
> Ma
* Nishanth Menon [150622 08:14]:
> DRA7 uses OMAP5 IO table at the moment. This is purely spurious since
> the OMAP5 and DRA7 register maps are different in many aspects.
>
> AM57xx/DRA7 TRM Reference: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
>
> NOTE: Most of the drivers are already doing i
* Ash Charles [150714 11:41]:
> On Tue, Jul 14, 2015 at 11:17 AM, Adam YH Lee wrote:
> > Audio-in was incorrectly routed to Line In. It should be Mic3L as per
> > schematic.
> >
> > Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
> > is no voltage seen on micbias (R127
* Tero Kristo [150714 06:30]:
> On 07/14/2015 02:06 PM, Tony Lindgren wrote:
> >* Keerthy [150625 06:48]:
> >>
> >>On Thursday 18 June 2015 02:36 PM, Mugunthan V N wrote:
> >>>On Thursday 18 June 2015 01:31 PM, Keerthy wrote:
> >>>>
wed-by: Peter Hurley
Also things still work for me, and the dts changes should
not cause merge conflicts during v4.3 merge window based on
what I have queued. So please feel free to queue these
all via the tty tree and add:
Acked-by: Tony Lindgren
--
To unsubscribe from this list: send the line "
* Peter Ujfalusi [150702 07:08]:
> Hi,
>
> Changes since v1:
> - Add patch for omap2plus_defconfig to enable needed audio drivers
> - Included other board patches since they all need the change in
> omap2plus_defconfig
>
> Enable the simple card in omap2plus_defconfig as more boards are using
* Peter Ujfalusi [150701 05:54]:
> The sDMA requests are routed through the DMA crossbar and without the
> crossbar only peripherals using DMA request 0-127 can be used.
>
> Signed-off-by: Peter Ujfalusi
> ---
> Hi Tony,
>
> as you have suggested:
> http://permalink.gmane.org/gmane.linux.ports
* Nishanth Menon [150622 08:24]:
> In addition to the regular mux configuration such as mux mode 1,
> 2 etc, certain pins of DRA7 require to have "virtual mode" also
> programmed. This allows for predefined delay characteristics to
> be used by the SoC to meet timing characterstics needed for the
* Mugunthan V N [150622 02:05]:
> From: Vignesh R
>
> On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw
> slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to
> select cpsw slave0.
>
> Signed-off-by: Vignesh R
> Signed-off-by: Mugunthan V N
Applying into omap-
* Keerthy [150625 06:48]:
>
> On Thursday 18 June 2015 02:36 PM, Mugunthan V N wrote:
> >On Thursday 18 June 2015 01:31 PM, Keerthy wrote:
> >>The series adds the missing clock node needed for cpsw.
> >>
> >>Keerthy (2):
> >> CLK: TI: add dpll_clksel_mac_clk node
> >> ARM: dts: am4372: Set th
* Ash Charles [150612 13:39]:
> The Gumstix "Tobi-Duo" expansion board [1] can be used with either
> OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221
> chips.
> It is necessary to duplicate the interface information for the
> second SMSC9221 chip as discussed [2].
>
> [1] http
* Tero Kristo [150714 03:34]:
> On 07/14/2015 12:54 PM, Tony Lindgren wrote:
> >* Tero Kristo [150714 01:56]:
> >>
> >>This pull request contains the TI clock driver set to move the clock
> >>implementations under clock driver. Some small portions of the cloc
* Roger Quadros [150512 09:08]:
> This register is required to be passed to the SATA PHY driver
> to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
>
> Signed-off-by: Roger Quadros
> Signed-off-by: Sekhar Nori
> ---
> arch/arm/boot/dts/dra7.dtsi | 1 +
> 1 file changed, 1
* Jyri Sarha [150508 04:29]:
> Use new binding for the external tda19988 HDMI encoder.
Applying this into omap-for-v4.3/dt thanks.
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vg
* Tony Lindgren [150409 12:17]:
> * Peter Ujfalusi [150409 12:07]:
> > On 04/09/2015 10:01 PM, Tony Lindgren wrote:
> > > * Peter Ujfalusi [150409 11:55]:
> > >> On 04/09/2015 06:18 PM, Tony Lindgren wrote:
> > >>> * Peter Ujfalusi [150409 02:37]:
* Dave Gerlach [150713 10:37]:
> Hi,
>
> Now that wkup_m3_rproc driver [1] has been merged the support code
> contained in this series can be merged. This is v4 which is just a
> rebase of v3 [2] code on v4.2-rc2, no other changes.
Thanks applying into omap-for-v4.3/dt.
Tony
> [1] http://www.
* Tero Kristo [150714 01:56]:
>
> This pull request contains the TI clock driver set to move the clock
> implementations under clock driver. Some small portions of the clock driver
> code still remain under mach-omap2 after this, it should be decided whether
> this code is now obsolete and should
* Pali Rohár [150714 00:16]:
> On Monday 13 July 2015 17:36:07 Michael Welling wrote:
> > On Tue, Jul 14, 2015 at 12:02:44AM +0200, Pali Rohár wrote:
> > > I think nothing special. I just call:
> > >
> > > export ARCH=arm
> > > export CROSS_COMPILE=arm-linux-gnueabi-
> > > make rx51_defconfig
> >
* Tony Lindgren [150713 21:52]:
> * Nishanth Menon [150713 13:56]:
> > On Mon, Jul 13, 2015 at 3:41 PM, Felipe Balbi wrote:
> > > According to DRA7x TRM section 4.3.5 Realtime Counter (Master Counter),
> > > the realtime counter sits in the Wakeup Always-On Power dom
* Dave Gerlach [150710 14:08]:
> CONFIG_HAVE_ARM_SCU only gets selected if CONFIG_SMP is selected in an OMAP
> system, however AM43XX needs this option regardless of CONFIG_SMP and also
> for an AM43XX only build as it is important for controlling power in the SoC.
> Without this we cannot suspend
* Suman Anna [150710 10:31]:
> Hi Tony,
>
> This series adds the #iommu-cells property to the existing
> IOMMU nodes on OMAP4 & OMAP5. It was already fixed for OMAP3
> in commit 2055088b5e17 ("ARM: dts: omap3: Add #iommu-cells to
> isp and iva iommu").
>
> OMAP4 and OMAP5 do not yet have users f
* Arun Bharadwaj [150604 11:10]:
> From: Adam YH Lee
>
> Audio-in was incorrectly routed to Line In. It should be Mic3L as per
> schematic.
>
> Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
> is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) wo
* Ash Charles [150609 08:47]:
> This works well for me--cpufreq seems much happier.
>
> Tested-by: Ash Charles
>
> On Thu, Jun 4, 2015 at 11:08 AM, Arun Bharadwaj wrote:
> > The device tree for Gumstix Pepper has DCDC2 and
> > DCDC3 correctly labelled but the upper limit values
> > are wrong.
* Adam YH Lee [150709 15:40]:
> Boot process is halting in midway because some of the necessary voltage
> regulators are deemed unused and subsequently powered off, leading to
> a completely unresponsive system.
>
> Most of the device nodes had correct voltage regulator attachments.
> Yet these n
* Ash Charles [150612 13:39]:
> From: Adam YH Lee
>
> For Gumstix Overo COMs, the u-boot bootloader typically passes an
> argument specifying the default display via the omapdss.def_disp
> parameter. When a default display is specified, DSS2 tries to match
> this name with either the device tre
* Nishanth Menon [150713 13:56]:
> On Mon, Jul 13, 2015 at 3:41 PM, Felipe Balbi wrote:
> > According to DRA7x TRM section 4.3.5 Realtime Counter (Master Counter),
> > the realtime counter sits in the Wakeup Always-On Power domain.
> > Furthermore, the counter will automatically switch the 32K cl
* Roger Quadros [150710 05:26]:
> Add device_timings, gpmc_timings and gpmc_setting to
> gpmc platform data.
Move timings to platform data instead of add them?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kerne
* Pali Rohár [150713 04:13]:
>
> Ok, and any idea what is with rtc?
Probably one of these:
$ git log --pretty=oneline v4.1..v4.2-rc2 drivers/mfd/*twl*
drivers/i2c/busses/i2c-omap.c
24867481b8c0a3bc3ab53b634e3cc03680ac3ac6 Merge branch 'i2c/for-4.2' of
git://git.kernel.org/pub/scm/linux/kernel
* Pali Rohár [150707 05:00]:
> On Tuesday 07 July 2015 12:32:13 Russell King - ARM Linux wrote:
> > On Mon, Jul 06, 2015 at 10:26:13PM +0200, Pali Rohár wrote:
> > > Legacy bootloaders can pass additional information for kernel or legacy
> > > userspace applications. When booting DT kernel then AT
* nick [150713 05:54]:
> On 2015-07-13 08:40 AM, Tony Lindgren wrote:
> > * Roger Quadros [150713 03:07]:
> >
> >> What is the best map we should use for irqchip?
> >> Some Socs have 4 WAIT pins, some have 3 and some have 2.
> >>
> >> Should
* Roger Quadros [150713 03:07]:
> Tony,
>
> On 13/07/15 10:10, Tony Lindgren wrote:
> > * Roger Quadros [150710 05:26]:
> >> Since the Interrupt Events are used only by the NAND driver,
> >> there is no point in managing the Interrupt registers
> >> i
* Tony Lindgren [150713 00:28]:
> * Dave Gerlach [150709 12:53]:
> > Tony,
> > On 04/01/2015 02:47 PM, Dave Gerlach wrote:
> > > This series adds the mach-omap2 code and DT nodes for v3 of the
> > > wkup_m3_rproc driver submitted here [1]. pdata-quirks patch re
* Dave Gerlach [150709 12:53]:
> Tony,
> On 04/01/2015 02:47 PM, Dave Gerlach wrote:
> > This series adds the mach-omap2 code and DT nodes for v3 of the
> > wkup_m3_rproc driver submitted here [1]. pdata-quirks patch requires
> > the pdata added with patch 4 of the aforementioned series. Based on
* Roger Quadros [150710 05:26]:
> Since the Interrupt Events are used only by the NAND driver,
> there is no point in managing the Interrupt registers
> in the GPMC driver and complicating it with irqchip modeling.
I don't think it's a good idea to allow external drivers to
tinker directly with G
* Pali Rohár [150711 05:07]:
> Hello,
>
> now I tested 4.2-rc1 release on Nokia N900 and couple of drivers are
> broken and cause kernel oops...
>
> Basically wifi, touchscreen and rtc drivers not working...
>
> Here are some relevant snippets form dmesg:
>
> [ 13.933959] Unhandled fault: ex
* Marc Kleine-Budde [150712 12:22]:
> On 07/09/2015 08:34 PM, Marc Kleine-Budde wrote:
> > On 07/07/2015 04:27 PM, Roger Quadros wrote:
> >> Driver core sets "default" pinmux on on probe and CAN driver
> >> sets "sleep" pinmux during register. This causes a small window
> >> where the CAN pins are
supply for usb2_phy2
Tomi Valkeinen (1):
ARM: dts: am4372.dtsi: disable rfbi
Tony Lindgren (2):
memory: omap-gpmc: Fix parsing of devices
Merge branch 'fixes-rc1' into omap-for-v4.2/fixes
Documentation/devicetree/bindings/memory-controllers/ti/emif.txt | 1 +
arch/arm
---
> > arch/arm/mach-exynos/suspend.c | 3 ++-
> > arch/arm/mach-imx/gpc.c | 7 ++-
> > arch/arm/mach-omap2/omap-wakeupgen.c | 7 ++-
> > 3 files changed, 6 insertions(+), 11 deletions(-)
> >
>
> For Exynos:
> Acked-by: Krzysztof Kozlows
* Pali Rohár [150707 00:48]:
> On Monday 06 July 2015 06:53:18 Tony Lindgren wrote:
> > * Pali Rohár [150706 06:27]:
> > > On Tuesday 28 October 2014 23:26:41 Tony Lindgren wrote:
> > > > * Pavel Machek [141028 15:22]:
> > > > > O
* John Stultz [150706 10:55]:
> On Mon, Jul 6, 2015 at 10:34 AM, Thomas Gleixner wrote:
> > On Mon, 6 Jul 2015, John Stultz wrote:
> >> On Mon, Jul 6, 2015 at 12:12 AM, Tony Lindgren wrote:
> >> > Some persistent clocksources can be on a slow external bus. For s
* John Stultz [150706 10:53]:
> On Mon, Jul 6, 2015 at 8:46 AM, Thomas Gleixner wrote:
> > On Mon, 6 Jul 2015, Tony Lindgren wrote:
> >> * Thomas Gleixner [150706 07:20]:
> >> > On Mon, 6 Jul 2015, Tony Lindgren wrote:
> >> The timekeeping accuracy i
* Tero Kristo [150707 00:25]:
> On 07/06/2015 06:25 PM, Tony Lindgren wrote:
> >* Grygorii Strashko [150706 08:14]:
> >>On DRA7 there is one pinctrl domain (dra7_pmx_core) and
> >>PRCM wake-up IRQ is not shared, so remove quirk.
> >>
> >>Cc: Nis
> > sure a subsequent call to dev_pm_attach_wake_irq()
> > has chance to succeed.
> >
> > Cc: Tony Lindgren
> > Signed-off-by: Felipe Balbi
> > ---
> > drivers/base/power/wakeirq.c | 9 -
> > 1 file changed, 8 insertions(+), 1 deletion(-)
>
* Thomas Gleixner [150706 08:48]:
> On Mon, 6 Jul 2015, Tony Lindgren wrote:
> > * Thomas Gleixner [150706 07:20]:
> > > On Mon, 6 Jul 2015, Tony Lindgren wrote:
> > The timekeeping accuracy issue certainly needs some thinking, and
> > also the resolution b
ncy' report
> can be seen:
...
> To fix it use IRQF_NO_THREAD to ensure that pcs irq will not be forced
> threaded.
>
> Cc: Tony Lindgren
> Cc: Sebastian Andrzej Siewior
> Signed-off-by: Grygorii Strashko
> ---
> drivers/pinctrl/pinctrl-single.c | 3 ++-
> 1
* Grygorii Strashko [150706 08:14]:
> On DRA7 there is one pinctrl domain (dra7_pmx_core) and
> PRCM wake-up IRQ is not shared, so remove quirk.
>
> Cc: Nishanth Menon
> Cc: Tony Lindgren
> Fixes: 31320beaa3d3 ('pinctrl: single: Add DRA7 pinctrl compatibility'
* Rob Herring [150706 08:23]:
> On Mon, Jul 6, 2015 at 7:31 AM, Tony Lindgren wrote:
> > * Pali Rohár [150706 05:25]:
> >>
> >> into which file should I put documentation about new DT properties?
> >
> > If it's Linux generic like linux,revision, th
Hi,
* Thomas Gleixner [150706 07:20]:
> On Mon, 6 Jul 2015, Tony Lindgren wrote:
>
> > Some persistent clocksources can be on a slow external bus. For shorter
> > latencies for RT use, let's allow toggling the clocksource during idle
> > between a faster non-persist
* Pali Rohár [150706 06:14]:
> On Monday 06 July 2015 14:31:27 Tony Lindgren wrote:
> > * Pali Rohár [150706 05:25]:
> > > into which file should I put documentation about new DT properties?
> >
> > If it's Linux generic like linux,revision, then how about
&g
* Pali Rohár [150706 06:27]:
> On Tuesday 28 October 2014 23:26:41 Tony Lindgren wrote:
> > * Pavel Machek [141028 15:22]:
> > > On Tue 2014-10-28 23:04:50, Pavel Machek wrote:
> > > >
> > > > Networking now works against 3.17-based kernel. Thanks!
>
* Pali Rohár [150706 05:25]:
>
> into which file should I put documentation about new DT properties?
If it's Linux generic like linux,revision, then how about
Documentation/devicetree/bindings/revision.txt?
For the ATAGs, Documentation/devicetree/bindings/arm/atag.txt?
Regards,
Tony
--
To unsu
* Tomi Valkeinen [150630 05:07]:
> When DSS nodes were added to am4372.dtsi, the rfbi node was not marked
> as disabled. This should have been done, as the rule of thumb is to
> disable all DSS nodes that are not used, and especially rfbi, as we
> don't have a driver for rfbi.
>
> Signed-off-by:
* Roger Quadros [150617 07:54]:
> Without this USB2 breaks if USB1 is disabled or USB1
> initializes after USB2 e.g. due to deferred probing.
>
> Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15")
> Signed-off-by: Roger Quadros
> Cc: sta...@vger.kernel.org (v3.19+)
Applying into omap-for-v
601 - 700 of 12192 matches
Mail list logo
