Le 26 avril 2010 08:02:55 UTC+2, Gadiyar, Anand a écrit :
> Gregory CLEMENT wrote:
>> This controller supports multiple interface modes. Only 2 of them
>> (3-pin DAT/SE0 and 4-pin DP/DM PHY modes) have been tested with this
>> driver. (However the only change for the other modes
Gregory CLEMENT wrote:
> This controller supports multiple interface modes. Only 2 of them
> (3-pin DAT/SE0 and 4-pin DP/DM PHY modes) have been tested with this
> driver. (However the only change for the other modes is one register
> setting for selecting the mode, and the
2010/4/26 Anand Gadiyar
>
> Hi all,
>
> This patch series adds the bus glue layer for the OHCI controller
> on OMAP3 and later chips. This controller is a companion
> to the EHCI controller on that chip, and some code is common
> between the two drivers. The driver has been sitting in internal
> t
Hi all,
This patch series adds the bus glue layer for the OHCI controller
on OMAP3 and later chips. This controller is a companion
to the EHCI controller on that chip, and some code is common
between the two drivers. The driver has been sitting in internal
trees for ages, and I've finally found ti
