On 8/30/2013 12:23 PM, Chanwoo Choi wrote:
Hi George,
On 08/30/2013 03:15 PM, George Cherian wrote:
Hi Chanwoo,
On 8/30/2013 5:41 AM, Chanwoo Choi wrote:
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 5:42 PM, Chanwoo Choi wrote:
[big snip ]
I tested
On 8/30/2013 12:44 PM, Chanwoo Choi wrote:
Hi George,
In addition, I add answer about that device driver control gpio pin directly.
On 08/30/2013 03:15 PM, George Cherian wrote:
Hi Chanwoo,
On 8/30/2013 5:41 AM, Chanwoo Choi wrote:
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/30/2013 5:41 AM, Chanwoo Choi wrote:
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 5:42 PM, Chanwoo Choi wrote:
[big snip ]
I tested various development board based on Samsung Exynos series SoC.
Although some gpio of Exynos series SoC
Hi George,
On 08/30/2013 03:15 PM, George Cherian wrote:
Hi Chanwoo,
On 8/30/2013 5:41 AM, Chanwoo Choi wrote:
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 5:42 PM, Chanwoo Choi wrote:
[big snip ]
I tested various development board based on
Hi George,
In addition, I add answer about that device driver control gpio pin directly.
On 08/30/2013 03:15 PM, George Cherian wrote:
Hi Chanwoo,
On 8/30/2013 5:41 AM, Chanwoo Choi wrote:
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 5:42 PM,
Hi George,
On 08/29/2013 11:21 AM, George Cherian wrote:
Hi Chanwoo,
Thanks for the review and sorry for all the trivial mistakes.
On 8/29/2013 7:05 AM, Chanwoo Choi wrote:
Hi George,
You didn't modify this patchset about my comment on v1 patchset.
Please pay attention to comment.
On
Hi Chanwoo,
On 8/29/2013 11:53 AM, Chanwoo Choi wrote:
[snip]
You should keep following naming stlye. extcon-gpio-usbvid.c is wrong naming
style.
- extcon-[device name].c
- extcon-gpio-usbvid.c - extcon-dra7xx.c or etc.
Actually dra7xx is the SoC name and the USB VBUS/ID detection is not
On 08/29/2013 04:30 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 11:53 AM, Chanwoo Choi wrote:
[snip]
You should keep following naming stlye. extcon-gpio-usbvid.c is wrong naming
style.
- extcon-[device name].c
- extcon-gpio-usbvid.c - extcon-dra7xx.c or etc.
Actually dra7xx is
On 8/29/2013 4:07 PM, Chanwoo Choi wrote:
On 08/29/2013 04:30 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 11:53 AM, Chanwoo Choi wrote:
[snip]
You should keep following naming stlye. extcon-gpio-usbvid.c is wrong naming
style.
- extcon-[device name].c
- extcon-gpio-usbvid.c -
On 08/29/2013 08:48 PM, George Cherian wrote:
On 8/29/2013 4:07 PM, Chanwoo Choi wrote:
On 08/29/2013 04:30 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 11:53 AM, Chanwoo Choi wrote:
[snip]
You should keep following naming stlye. extcon-gpio-usbvid.c is wrong
naming style.
-
Hi Chanwoo,
On 8/29/2013 5:42 PM, Chanwoo Choi wrote:
[big snip ]
I tested various development board based on Samsung Exynos series SoC.
Although some gpio of Exynos series SoC set high state(non zero, 1) as default
value,
this gpio state could mean off state, disconnected or un-powered state
On 08/29/2013 05:48 AM, George Cherian wrote:
On 8/29/2013 4:07 PM, Chanwoo Choi wrote:
...
I tested various development board based on Samsung Exynos series SoC.
Although some gpio of Exynos series SoC set high state(non zero, 1) as
default value,
this gpio state could mean off state,
On 08/28/2013 11:33 AM, George Cherian wrote:
Add a generic USB VBUS/ID detection EXTCON driver. This driver expects
the ID/VBUS pin are connected via GPIOs. This driver is tested on
DRA7x board were the ID pin is routed via GPIOs. The driver supports
both VBUS and ID pin configuration and ID
Hi George,
On 08/29/2013 10:45 PM, George Cherian wrote:
Hi Chanwoo,
On 8/29/2013 5:42 PM, Chanwoo Choi wrote:
[big snip ]
I tested various development board based on Samsung Exynos series SoC.
Although some gpio of Exynos series SoC set high state(non zero, 1) as
default value,
this
Add a generic USB VBUS/ID detection EXTCON driver. This driver expects
the ID/VBUS pin are connected via GPIOs. This driver is tested on
DRA7x board were the ID pin is routed via GPIOs. The driver supports
both VBUS and ID pin configuration and ID pin only configuration.
Signed-off-by: George
Hi George,
You didn't modify this patchset about my comment on v1 patchset.
Please pay attention to comment.
On 08/29/2013 02:33 AM, George Cherian wrote:
Add a generic USB VBUS/ID detection EXTCON driver. This driver expects
the ID/VBUS pin are connected via GPIOs. This driver is tested on
Hi Chanwoo,
Thanks for the review and sorry for all the trivial mistakes.
On 8/29/2013 7:05 AM, Chanwoo Choi wrote:
Hi George,
You didn't modify this patchset about my comment on v1 patchset.
Please pay attention to comment.
On 08/29/2013 02:33 AM, George Cherian wrote:
Add a generic USB
17 matches
Mail list logo
