Adding debug to bootargs
( Kernel command line: mem=128M console=ttyS2,115200n8 noinitrd
root=/dev/mtdblock6 rw rootfstype=jffs2 debug
ip=192.168.90.101:192.168.90.230:192.168.90.1:255.255.255.0::eth0:on
mac=00:19:6f:cc:cc:dd )
doesn't change the output. Do I need a recompile with some kernel confi
> Thanks Anand,
> I don't have any USB working on the board.
> If this only for this USB - is it save to comment that out?
>
If you're not using EHCI/OHCI, it ought to be safe to comment
it out.
My best guess is that you are using some non-standard frequencies
and you've made changes to the code
2010/7/16 Gadiyar, Anand :
> Arno Steffen wrote:
>>
>> I do have some messages while booting a 2.6.33 kernel:
>>
>> What does this mean? How can I get rid of it?
>> What is omap3_clk_lock_dpll5() doing and what if I comment it out? I
>> guess it make some sense ;)
>>
>
> Not sure why you have this
Gadiyar, Anand wrote:
> Arno Steffen wrote:
> >
> > I do have some messages while booting a 2.6.33 kernel:
> >
> > What does this mean? How can I get rid of it?
> > What is omap3_clk_lock_dpll5() doing and what if I comment it out? I
> > guess it make some sense ;)
> >
>
> Not sure why you hav
Arno Steffen wrote:
>
> I do have some messages while booting a 2.6.33 kernel:
>
> What does this mean? How can I get rid of it?
> What is omap3_clk_lock_dpll5() doing and what if I comment it out? I
> guess it make some sense ;)
>
Not sure why you have this issue - I'll have to dig a bit, or
> Reprogramming SDRC clock to 26600 Hz
> dpll3_m2_clk rate change failed: -22
>
> Why I cant't let it run only on 322 MHz?
For this I could found an answer.
There is no entry for this frequency in
omap_sdrc_params mt46h32m32lf6_sdrc_params
(in arch/arm/mach-omap2/sdram-micron )
--
To unsu