Add a GPIO driver for the board control register/board status register
for the sa1100/assabet platform. This allows us to transition a range
of drivers to use the gpiod APIs rather than the platform private
ASSABET_BCR_* interfaces.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
arch/arm/mach-sa1100/Kconfig | 1 +
arch/arm/mach-sa1100/assabet.c | 71 ++++++++++++++++++++++++++++++++----------
2 files changed, 55 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 36e3c79f4973..07df3a59b13f 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -5,6 +5,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
select ARM_SA1110_CPUFREQ
+ select GPIO_REG
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d28ecb9ef172..8f24c84042e0 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/gpio-reg.h>
#include <linux/ioport.h>
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/serial_core.h>
@@ -61,20 +62,45 @@
unsigned long SCR_value = ASSABET_SCR_INIT;
EXPORT_SYMBOL(SCR_value);
-static unsigned long BCR_value = ASSABET_BCR_DB1110;
+static struct gpio_chip *assabet_bcr_gc;
+
+static const char *assabet_names[] = {
+ "cf_pwr", "cf_gfx_rst", "codec_rst", "irda_fsel",
+ "irda_md0", "irda_md1", "stereo_lb", "cf_bus_off",
+ "audio", "backlight", "lcd_12rgb", "lcd_on",
+ "rs232", "d9_led", "d8_led", "vib_on",
+ "com_dtr", "com_rts", "rad_wu", "smb_en",
+ "tv_ir_dec", "qmute", "rad_on", "spk_off",
+ "rs232_valid", "com_dcd", "com_cts", "com_dsr",
+ "rad_cts", "rad_dsr", "rad_dcd", "rad_ri",
+};
+/* The old deprecated interface */
void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
{
- unsigned long flags;
+ unsigned long m = mask, v = val;
- local_irq_save(flags);
- BCR_value = (BCR_value & ~mask) | val;
- ASSABET_BCR = BCR_value;
- local_irq_restore(flags);
+ assabet_bcr_gc->set_multiple(assabet_bcr_gc, &m, &v);
}
-
EXPORT_SYMBOL(ASSABET_BCR_frob);
+static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
+{
+ struct gpio_chip *gc;
+
+ writel_relaxed(def_val, reg);
+
+ gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val,
+ assabet_names);
+
+ if (IS_ERR(gc))
+ return PTR_ERR(gc);
+
+ assabet_bcr_gc = gc;
+
+ return gc->base;
+}
+
/*
* The codec reset goes to three devices, so we need to release
* the rest when any one of these requests it. However, that
@@ -146,7 +172,7 @@ static void adv7171_write(unsigned reg, unsigned val)
unsigned gpdr = GPDR;
unsigned gplr = GPLR;
- ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON;
+ ASSABET_BCR_frob(ASSABET_BCR_AUDIO_ON, ASSABET_BCR_AUDIO_ON);
udelay(100);
GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't
respond */
@@ -457,14 +483,6 @@ static void __init assabet_init(void)
sa11x0_ppc_configure_mcp();
if (machine_has_neponset()) {
- /*
- * Angel sets this, but other bootloaders may not.
- *
- * This must precede any driver calls to BCR_set()
- * or BCR_clear().
- */
- ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111;
-
#ifndef CONFIG_ASSABET_NEPONSET
printk( "Warning: Neponset detected but full support "
"hasn't been configured in the kernel\n" );
@@ -748,12 +766,31 @@ static int __init assabet_leds_init(void)
fs_initcall(assabet_leds_init);
#endif
+void __init assabet_init_irq(void)
+{
+ u32 def_val;
+
+ sa1100_init_irq();
+
+ if (machine_has_neponset())
+ def_val = ASSABET_BCR_DB1111;
+ else
+ def_val = ASSABET_BCR_DB1110;
+
+ /*
+ * Angel sets this, but other bootloaders may not.
+ *
+ * This must precede any driver calls to BCR_set() or BCR_clear().
+ */
+ assabet_init_gpio((void *)&ASSABET_BCR, def_val);
+}
+
MACHINE_START(ASSABET, "Intel-Assabet")
.atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
.nr_irqs = SA1100_NR_IRQS,
- .init_irq = sa1100_init_irq,
+ .init_irq = assabet_init_irq,
.init_time = sa1100_timer_init,
.init_machine = assabet_init,
.init_late = sa11x0_init_late,
--
2.1.0
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
