On 2010-01-23 03:32, thomas_chena...@dell.com wrote:
> Jefferson Ogata wrote:
>> Anyone know how to PXE boot an R900 off of an Intel 10Gb optical NIC
>> rather than one of the onboard copper NICs?
>
> Some Intel 10Gb optical NICs are bootable, but not necessarily all. For
> bootable adapters, th
Jefferson Ogata wrote:
> Anyone know how to PXE boot an R900 off of an Intel 10Gb optical NIC
> rather than one of the onboard copper NICs?
Some Intel 10Gb optical NICs are bootable, but not necessarily all. For
bootable adapters, the boot ROM needs to be programmed and enabled using a
DOS-base
I could be wrong, but my understanding is that the perc cards have BB write
caches and that the SAS cards do not, which would certainly have a very
significant effect in iops.
--M
On Jan 22, 2010, at 4:38 PM, Kaerka Phillips wrote:
> Hello,
>
> I was wondering if anyone on the linux-poweredg
Hello,
I was wondering if anyone on the linux-poweredge list has done any
performance testing of same or similar hardware using the PERC6 vs. the SAS6
controller cards? I have 7 R805's, two of which have PERC6/i cards
installed, and the other 5 have SAS6/iR cards installed. I've been working
on
I've had this issue before with PE1750, PE1850's and a few 2850's. Most of
the time, reapplying the ESM/BMC firmware fixes it, but in one case, I think
we had to replace the ESM and riser card (I think I'm remembering this
correctly).
On Tue, Jan 12, 2010 at 9:19 AM, Mikolaj Kucharski
wrote:
> H
Anyone know how to PXE boot an R900 off of an Intel 10Gb optical NIC
rather than one of the onboard copper NICs?
Thanks in advance.
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Ple
> LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
>
> I can monitor those raid status using mpt-status but I can't modify the
> Raid array to create new volumes while the system is running.
>
> With MegaCli on a perc5 I can manipulate the RAID array.
> Is there such a tool fo
I also tell them that it's a production server that we cannot afford to bring
down / interfere with (which they generally are tbf)
B
-Original Message-
From: linux-poweredge-boun...@dell.com
[mailto:linux-poweredge-boun...@dell.com] On Behalf Of Rahul Nabar
Sent: 21 January 2010 22:50
T
Christian Appelgren wrote:
> Jason Ede wrote:
>
>>> -Original Message-
>>> From: linux-poweredge-boun...@dell.com [mailto:linux-poweredge-
>>> boun...@dell.com] On Behalf Of Christian Appelgren
>>> Sent: 18 November 2008 07:38
>>> To: linux-poweredge@dell.com
>>> Subject: Re: Disk stat
Hi !
Any one had a chance to benchmark those against older SAS 6/iR and PERC 6/i ?
--
Lazy
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.del
As in a Debian 5.0.3 (Lenny) standard installation the driver for DELL
SAS HBA seems to be outdated
I like to have I my production environment a newer version.
[0.00] Linux version 2.6.26-2-amd64 (Debian 2.6.26-19lenny2)
(da...@debian.org)
(gcc version 4.1.3 20080704 (prerelease) (D
11 matches
Mail list logo