Scenario: two R610s, both running CentOS 6.8, fully updated.
One seems to be fine with a DSU run, reporting all firmware up to date
(although it doesn't list the iDRAC, is that normal?)
The other does this:
# dsu
Verifying catalog installation ...
Installing catalog from repository ...
Fetching
On Wed, Dec 8, 2010 at 08:17, Michael Tiernan wrote:
> On 12/8/10 12:05 PM, paul_m...@dell.com wrote:
> > The second link is for a 2950/SAS and the first was for 2850/SCSI. Not a
> valid comparison.
> >
> My apologies. I went too quickly.
>
> ___
> Linu
On Sat, Nov 13, 2010 at 18:55, Matt Domsch wrote:
> Fedora 15 is expected to contain the newly agreed upon udev rules to
> name those pesky LAN-on-Motherboard NICs "lomN" instead of "ethX" for
> new installs, or any time /lib/udev/rules.d/70-persistent-net.names is
> deleted.
>
> biosdevname, a D
I just received my first Gen11 server, R710, with H700 PERC. I removed
the supplied drives, and installed 4 Barracuda ES.2s. After doing a
"Clear Configuration" in the pre-boot RAID setup utility, I can perform
no operation with the drives - they are marked as "blocked".
Is Dell preventing the use
We are installing a couple of PE servers (2900 and R710) at our summit
facility. Ambient temperature can be as low as 1C (dewpoint at -15C).
Apart from annoying "low ambient temperature" warnings from OMSA, is
there anything to be concerned about? Is it feasible to adjust fan RPM
settings?
Thanks
On 12/17/2009 11:39 AM, Jose-Marcio Martins da Cruz wrote:
> Philip Tait wrote:
>> We want to attach an MD1000 to a PE2900 in a non -RAID configuration.
>>
>> The Dell sales people are very convinced that we have to have a PERC6/E
>> to connect an MD1000, but they
We want to attach an MD1000 to a PE2900 in a non -RAID configuration.
The Dell sales people are very convinced that we have to have a PERC6/E
to connect an MD1000, but they are doing further research.
In the meantime, I wondered if anyone on the list is actually using a
SAS5/E to attach an MD1000
Patrick,
See if any of the information on this page helps:
http://en.opensuse.org/Installation_of_Dell_OpenManage_%28OMSA%29_for_Poweredge_servers
Updates and corrections welcome.
Philip J. Tait
http://subarutelescope.org
Patrick de Groot wrote:
> OpenManage 5.5 web interface doesn't run on Ope