I've patched the vanilla 2.0.36 kernel with raid0145-19990128-2.0.36 patch
and compiled the kernel, but I got this error messages:
setup.c: In function `setup_arch':
setup.c:129: `empty_zero_page' undeclared (first use this function)
setup.c:129: (Each undeclared identifier is reported only
I'm using Kernel 2.2.0 with the appropriate RAID tools and patches. I have
six Quantum 4.3GB U2W (80mb/s) drives and an Adaptec 2940U2W controller,
with the raidtools running a RAID5 across all the drives. When I do any kind
of prolonged work on the drives (mke2fs on a 3gig partition, or copying
Hi folks,
This could make a pretty good howto if it has a happy ending.
I got a mylex dac960 card to drive an external rack with 5-9gb scsi
drives. RH5.2 (2.0.36) already is installed, on an ide hard drive.
Collected the driver and utilities from dandelion, made a new kernel and
swapped out
Interesting... I'm not using raid, but I get the same error on my system
after installing an AMD K6/2 350Mhz processor. I have an old Adaptec 2940W,
I tried an Advansys (UW) controller too, but it had the same problem. I
clocked the AMD as low as it would go - 233 Mhz, but I had the same
I'm trying to build a raid array (preferrably RAID5, but 0 will do) on a
Sparc platform. I've been 98% unsuccessful in doing so. I've been
successful in getting a raid 0 array built under 2.2.1, but as soon as I
shut it down, it destroys itself, and is unrecoverable. Also 2.2.1 appears
to be