I checked on my termination, and it's all fine. I'm using only U2W cable and
a Adaptec U2W active terminator, so I don't think that's the problem. I do
have an internal tape drive connected to the SE segment of the 2940U2W
controller, but according to Adaptec, that doesn't have any influence on
Define #include asm/pgtable.h in setup.c.
On Thu, 18 Feb 1999, Dave Wreski wrote:
Hi all. I'm trying to compile 2.0.36 with the raid0145-19990128-2.0.36 patch,
and receive the following error:
gcc -D__KERNEL__ -I/usr/src/linux-2.0.36/include -Wall -Wstrict-prototypes -O2
Hi!
I´m sutre this is common knowledge, but I have to ask.
I+ve recently put in som diskt into my linux box and use Stripping raid.
My problem is that whenever my maschine crasches or reboots the filesystem
craches.
This is due to my lack of succeding in automaticly mounting and unmountind
Fredrik Johnsson wrote:
My problem is that whenever my maschine crasches or reboots the filesystem craches.
This is due to my lack of succeding in automaticly mounting and unmountind dev
/dev/md0 at boot and reboot.
Make sure you mdstart and mdstop it properly.
If you happen to be using a
Did you try turning off Synch negotiation? My timeout problems went
away immediately, even with the AMD K6/2.
-Original Message-
From: Robin Giese [SMTP:[EMAIL PROTECTED]]
Sent: 18 Feb 1999 8:59 PM
To:Giulio Botto; [EMAIL PROTECTED]
Subject: Re: SCSI: aborting command ...
