bug1 wrote:
>
> Clay Claiborne wrote:
> >
> > For what its worth, we recently built an 8 ide drive 280GB raid5 system.
> > Benchmarking with HDBENCH we got 35.7MB/sec read and 29.87MB/sec write. With
> > DBENCH and 1 client we got 44.5 MB/sec with 3 clients it dropped down to about
> > 43MB/sec.
Hi again,
as usual I forgot to mention sth:-(
The raid consists entirely of ide drives
remo
Hi raiders,
this might be a rather stupid question, but I just never
came accross sth in that direction.
If I plug in a new harddisk at runtime, how do I get
linux to recognize that new drive
Probably the things are rather easy if you replace an existing
one with identical properties and pa
Hi raiders again,
> I have been having these sorts of problems for a fair while, my opinon (and
> thats all it is) is that raid cant handle much more than 40MB/s,
> irespective of your setup, i think theres some other limiting factor
>
> Ive gotten ~35MB/s with 3 udma33 drives, each its own cha
Hi raider out there,
We have a fileserver with software RAID-5 here. It's a rackmountable
case
with 1 hardisk for the OS on one of the two onboard IDE controllers and
8
DNJA 20GB harddisk in CRU Dataport V cases connected to 4 Promise Ultra
66
cards (each has 2 buses).
So we installed a RAID5 ov
Hi there,
first of all thanx for all the replies concerning my previous mail.
second: hi jakob and here are the single mode bonnie results...
I have done some basic benchmarking in single user mode, and got strange
results:
First of all the setup:
I have a raid-1 partition of 64MB over all 8 di
Hi there,
we had the same idea here, and we used option number two...
I would not consider my advice as guru-guidance and neither should
you, just more some sort of moral support... :-)
Just works fine, except some errors we get on some of the disks,
while copying big amount of stuff (2gig in s
Hi there,
first of all, I am a raiding newbie as well, so this is not even my two cents.
:-)
David Cunningham wrote:
> Hello all. I found this address in the Raidtools-0.90.2 (Alpha) package.
> I'm not sure if this is a mailing list or not. If so, please copy answers
> to these questions to m
