I've posted the following message in the newsgroups
and a couple other places, without much success. I
got this address as I was about to try the mkraid
--force option when I saw this address. Executing
the actual command frightened me away by saying it
was about to destroy the contents of m
[ Monday, January 17, 2000 ] Holger Kiehl wrote:
> On Fri, 14 Jan 2000, James Manning wrote:
> > Just for clarification, the default (stock) RH 6.x *is* patched
> > for 0.90 RAID (the 6.1 installer even allows you to install to a
> > s/w raid1!)
>
> And raid0 or raid5, only /boot needs to be raid
On Fri, 14 Jan 2000, James Manning wrote:
> [ Friday, January 14, 2000 ] jesse nelson wrote:
> > I had the same problem the default kernel is not patched on 6.0 or 6.1
> > installs although they include the 0.90 tools. I think the up2date RPM's are
> > though. I just moved to Mandrake 7.Beta an
I haven't dealt with linear, but the stock RH kernel comes
with 0.90 raid so I'm not sure where the issue is here.
- Forwarded message from "Prof. Mad Crazy" <[EMAIL PROTECTED]> -
From: "Prof. Mad Crazy" <[EMAIL PROTECTED]>
To: <[EMAIL PRO
Jakob Osterngaard wrote:
[snip]
> Was 19MB/s from a RAID ?
>
> If so, how many disks ? What RAID configuration ? How did you measure it
?
>
I'm running RAID level 5 on four WD Caviar 20.4GB U66 drives.
19MB/s is what I get when I do a "hdparm -t /dev/md0". I also tried cp'ing
a 1GB file to /
On Fri, Jul 30, 1999 at 10:38:07PM -0500, D. Carlos Knowlton wrote:
> Hey guys,
>
> I have been trying for the past several months to get the full throughput
> that I'm supposed to be getting from my UDMA-66 hard drives, but - try as I
> might - I can only get sustained reads of 19MB/s max. I am
With 2.2.10 + a recent uniform ide patch, I don't have to do anything
with hdparm to get udma-66 working with a Promise Ultra66 card.
The kernel reports something like this at boot time:
Uniform Multi-Platform E-IDE driver Revision: 6.19
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX
Hey guys,
I have been trying for the past several months to get the full throughput
that I'm supposed to be getting from my UDMA-66 hard drives, but - try as I
might - I can only get sustained reads of 19MB/s max. I am using a promise
Ultra66 controller with four 20.4GB U-ATA-66 WD Caviar drives
Hello Sir,
Presently I have encountered with raid problem. I have 2 scsi h/d with 4G
each .
I intend to run raid1 software and using raidtool 0.90 . I have modified
the raid1.conf
and raidtab as attached and move to /etc directory. However when I run
mkraid
at /sbin it gives me this messag
