Hi, Mingo
my Linux box still doesn't compile
I've done:
- clean 2.0.36 kernel tree
- patch -p0 < your last release
- make menuconfig
- make dep; make clean
- make zImage ....until here everythings was OK!
- make modules ...
ld -m elf_i386 -m elf_i386 -r -o sr_mod.o sr.o sr_ioctl.o
sr_ioctl.o(.data+0x0): multiple definition of 'kernel_version'
sr.o(.data+0x0): first defined here
make[2]: *** [sr_mod.o] Error 1
make[2]: Leaving directory '/usr/src/linux/drivers/scsi'
make[1]: *** [modules] Error 2
make[1]: *** Leaving directory '/usr/src/linux/drivers'
make : *** [modules] Error 2
[root@luca ]#
Here you can have a look at my .config
and my Makefile
Thank's for your effort!
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M686 is not set
# CONFIG_MTRR is not set
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_MD=y
CONFIG_AUTODETECT_RAID=y
CONFIG_MD_LINEAR=y
CONFIG_MD_STRIPED=y
CONFIG_MD_MIRRORING=y
CONFIG_MD_RAID5=y
CONFIG_MD_TRANSLUCENT=m
CONFIG_MD_LVM=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
CONFIG_INET=y
# CONFIG_IP_FORWARD is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_INET_PCTCP is not set
# CONFIG_INET_RARP is not set
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=y
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_EEXPRESS_PRO100B is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
CONFIG_NE2K_PCI=y
# CONFIG_YELLOWFIN is not set
# CONFIG_RTL8139 is not set
# CONFIG_EPIC is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
CONFIG_ISDN_MPP=y
# CONFIG_ISDN_AUDIO is not set
# CONFIG_ISDN_DRV_ICN is not set
CONFIG_ISDN_DRV_LOOP=m
# CONFIG_ISDN_DRV_PCBIT is not set
CONFIG_ISDN_DRV_HISAX=m
# CONFIG_HISAX_EURO is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELES3C=y
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
# CONFIG_HISAX_AVM_A1 is not set
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_IX1MICROR2 is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_ISDN_DRV_AVMB1 is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=y
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_NLS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_WIN95=y
# CONFIG_NCP_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
# CONFIG_PRINTER is not set
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
VERSION = 2
PATCHLEVEL = 0
SUBLEVEL = 36
ARCH = i386
#
# For SMP kernels, set this. We don't want to have this in the config file
# because it makes re-config very ugly and too many fundamental files depend
# on "CONFIG_SMP"
#
# NOTE! SMP is experimental. See the file Documentation/SMP.txt
#
# SMP = 1
#
# SMP profiling options
# SMP_PROF = 1
.EXPORT_ALL_VARIABLES:
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
HPATH = $(TOPDIR)/include
FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net
HOSTCC =gcc -I$(HPATH)
HOSTCFLAGS =-O2 -fomit-frame-pointer
CROSS_COMPILE =
AS =$(CROSS_COMPILE)as
LD =$(CROSS_COMPILE)ld
CC =$(CROSS_COMPILE)gcc -D__KERNEL__ -I$(HPATH)
CPP =$(CC) -E
AR =$(CROSS_COMPILE)ar
NM =$(CROSS_COMPILE)nm
STRIP =$(CROSS_COMPILE)strip
MAKE =make
all: do-it-all
#
# Make "config" the default target if there is no configuration file or
# "depend" the target if there is no top-level dependency information.
#
ifeq (.config,$(wildcard .config))
include .config
ifeq (.depend,$(wildcard .depend))
include .depend
do-it-all: Version vmlinux
else
CONFIGURATION = depend
do-it-all: depend
endif
else
CONFIGURATION = config
do-it-all: config
endif
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
#
ROOT_DEV = CURRENT
#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Uncomment if you want to place them anywhere other than root.
#INSTALL_PATH=/boot
#
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
#
SVGA_MODE= -DSVGA_MODE=NORMAL_VGA
#
# standard CFLAGS
#
CFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strength-reduce
ifdef CONFIG_CPP
CFLAGS := $(CFLAGS) -x c++
endif
ifdef SMP
CFLAGS += -D__SMP__
AFLAGS += -D__SMP__
ifdef SMP_PROF
CFLAGS += -D__SMP_PROF__
AFLAGS += -D__SMP_PROF__
endif
endif
#
# if you want the ram-disk device, define this to be the
# size in blocks.
#
#RAMDISK = -DRAMDISK=512
# Include the make variables (CC, etc...)
#
ARCHIVES =kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o net/network.a
FILESYSTEMS =fs/filesystems.a
DRIVERS =drivers/block/block.a \
drivers/char/char.a
LIBS =$(TOPDIR)/lib/lib.a
SUBDIRS =kernel drivers mm fs net ipc lib
ifeq ($(CONFIG_ISDN),y)
DRIVERS := $(DRIVERS) drivers/isdn/isdn.a
endif
DRIVERS := $(DRIVERS) drivers/net/net.a
ifdef CONFIG_CD_NO_IDESCSI
DRIVERS := $(DRIVERS) drivers/cdrom/cdrom.a
endif
ifeq ($(CONFIG_SCSI),y)
DRIVERS := $(DRIVERS) drivers/scsi/scsi.a
endif
ifeq ($(CONFIG_SOUND),y)
DRIVERS := $(DRIVERS) drivers/sound/sound.a
endif
ifdef CONFIG_PCI
DRIVERS := $(DRIVERS) drivers/pci/pci.a
endif
ifdef CONFIG_SBUS
DRIVERS := $(DRIVERS) drivers/sbus/sbus.a
endif
ifeq ($(CONFIG_PARIDE),y)
DRIVERS := $(DRIVERS) drivers/block/paride/paride.a
endif
include arch/$(ARCH)/Makefile
ifdef SMP
.S.s:
$(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -E -o $*.s $<
.S.o:
$(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -c -o $*.o $<
else
.S.s:
$(CC) -D__ASSEMBLY__ -traditional -E -o $*.s $<
.S.o:
$(CC) -D__ASSEMBLY__ -traditional -c -o $*.o $<
endif
Version: dummy
@rm -f include/linux/compile.h
boot: vmlinux
@$(MAKE) -C arch/$(ARCH)/boot
vmlinux: $(CONFIGURATION) init/main.o init/version.o linuxsubdirs
$(LD) $(LINKFLAGS) $(HEAD) init/main.o init/version.o \
$(ARCHIVES) \
$(FILESYSTEMS) \
$(DRIVERS) \
$(LIBS) -o vmlinux
$(NM) vmlinux | grep -v '\(compiled\)\|\(\.o$$\)\|\( a \)' | sort > System.map
symlinks:
rm -f include/asm
( cd include ; ln -sf asm-$(ARCH) asm)
oldconfig: symlinks
$(CONFIG_SHELL) scripts/Configure -d arch/$(ARCH)/config.in
xconfig: symlinks
$(MAKE) -C scripts kconfig.tk
wish -f scripts/kconfig.tk
menuconfig: include/linux/version.h symlinks
$(MAKE) -C scripts/lxdialog all
$(CONFIG_SHELL) scripts/Menuconfig arch/$(ARCH)/config.in
config: symlinks
$(CONFIG_SHELL) scripts/Configure arch/$(ARCH)/config.in
linuxsubdirs: dummy
set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i; done
$(TOPDIR)/include/linux/version.h: include/linux/version.h
$(TOPDIR)/include/linux/compile.h: include/linux/compile.h
ksymoops:
$(MAKE) -C scripts ksymoops
newversion:
@if [ ! -f .version ]; then \
echo 1 > .version; \
else \
expr 0`cat .version` + 1 > .version; \
fi
include/linux/compile.h: $(CONFIGURATION) include/linux/version.h newversion
@if [ -f .name ]; then \
echo \#define UTS_VERSION \"\#`cat .version`-`cat .name` `date`\"; \
else \
echo \#define UTS_VERSION \"\#`cat .version` `date`\"; \
fi >> .ver
@echo \#define LINUX_COMPILE_TIME \"`date +%T`\" >> .ver
@echo \#define LINUX_COMPILE_BY \"`whoami`\" >> .ver
@echo \#define LINUX_COMPILE_HOST \"`hostname`\" >> .ver
@if [ -x /bin/dnsdomainname ]; then \
echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname`\"; \
elif [ -x /bin/domainname ]; then \
echo \#define LINUX_COMPILE_DOMAIN \"`domainname`\"; \
else \
echo \#define LINUX_COMPILE_DOMAIN ; \
fi >> .ver
@echo \#define LINUX_COMPILER \"`$(CC) -v 2>&1 | tail -1`\" >> .ver
@mv -f .ver $@
include/linux/version.h: ./Makefile
@echo \#define UTS_RELEASE \"$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)\" > .ver
@echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL)
\\* 256 + $(SUBLEVEL)` >> .ver
@mv -f .ver $@
init/version.o: init/version.c include/linux/compile.h
$(CC) $(CFLAGS) -DUTS_MACHINE='"$(ARCH)"' -c -o init/version.o init/version.c
init/main.o: init/main.c
$(CC) $(CFLAGS) $(PROFILING) -c -o $*.o $<
fs: dummy
$(MAKE) linuxsubdirs SUBDIRS=fs
lib: dummy
$(MAKE) linuxsubdirs SUBDIRS=lib
mm: dummy
$(MAKE) linuxsubdirs SUBDIRS=mm
ipc: dummy
$(MAKE) linuxsubdirs SUBDIRS=ipc
kernel: dummy
$(MAKE) linuxsubdirs SUBDIRS=kernel
drivers: dummy
$(MAKE) linuxsubdirs SUBDIRS=drivers
net: dummy
$(MAKE) linuxsubdirs SUBDIRS=net
MODFLAGS = -DMODULE
ifdef CONFIG_MODULES
ifdef CONFIG_MODVERSIONS
MODFLAGS += -DMODVERSIONS -include $(HPATH)/linux/modversions.h
endif
modules: include/linux/version.h
@set -e; \
for i in $(SUBDIRS); \
do $(MAKE) -C $$i CFLAGS="$(CFLAGS) $(MODFLAGS)" MAKING_MODULES=1 modules; \
done
modules_install:
@( \
MODLIB=/lib/modules/$(VERSION).$(PATCHLEVEL).$(SUBLEVEL); \
cd modules; \
MODULES=""; \
inst_mod() { These="`cat $$1`"; MODULES="$$MODULES $$These"; \
mkdir -p $$MODLIB/$$2; cp -p $$These $$MODLIB/$$2; \
echo Installing modules under $$MODLIB/$$2; \
}; \
\
if [ -f BLOCK_MODULES ]; then inst_mod BLOCK_MODULES block; fi; \
if [ -f NET_MODULES ]; then inst_mod NET_MODULES net; fi; \
if [ -f IPV4_MODULES ]; then inst_mod IPV4_MODULES ipv4; fi; \
if [ -f SCSI_MODULES ]; then inst_mod SCSI_MODULES scsi; fi; \
if [ -f FS_MODULES ]; then inst_mod FS_MODULES fs; fi; \
if [ -f CDROM_MODULES ]; then inst_mod CDROM_MODULES cdrom; fi; \
\
ls *.o > .allmods; \
echo $$MODULES | tr ' ' '\n' | sort | comm -23 .allmods - > .misc; \
if [ -s .misc ]; then inst_mod .misc misc; fi; \
rm -f .misc .allmods; \
)
# modules disabled....
else
modules modules_install: dummy
@echo
@echo "The present kernel configuration has modules disabled."
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
@exit 1
endif
clean: archclean
rm -f kernel/ksyms.lst include/linux/compile.h
rm -f core `find . -name '*.[oas]' ! -regex '.*lxdialog/.*' -print`
rm -f core `find . -type f -name 'core' -print`
rm -f vmlinux System.map
rm -f .tmp* drivers/sound/configure
rm -fr modules/*
rm -f submenu*
mrproper: clean
rm -f include/linux/autoconf.h include/linux/version.h
rm -f drivers/sound/local.h drivers/sound/.defines
rm -f drivers/char/uni_hash.tbl drivers/char/conmakehash
rm -f drivers/net/soundmodem/sm_tbl_{afsk1200,afsk2666,fsk9600}.h
rm -f drivers/net/soundmodem/sm_tbl_{hapn4800,psk4800}.h
rm -f drivers/net/soundmodem/sm_tbl_{afsk2400_7,afsk2400_8}.h
rm -f drivers/net/soundmodem/gentbl
rm -f .version .config* config.in config.old
rm -f scripts/tkparse scripts/kconfig.tk scripts/kconfig.tmp
rm -f scripts/lxdialog/*.o scripts/lxdialog/lxdialog
rm -f .menuconfig .menuconfig.log
rm -f include/asm
rm -f .depend `find . -name .depend -print`
rm -f .hdepend scripts/mkdep
rm -f $(TOPDIR)/include/linux/modversions.h
rm -f $(TOPDIR)/include/linux/modules/*
distclean: mrproper
rm -f core `find . \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -print` TAGS
backup: mrproper
cd .. && tar cf - linux/ | gzip -9 > backup.gz
sync
sums:
find . -type f -print | sort | xargs sum > .SUMS
dep-files: scripts/mkdep archdep include/linux/version.h
scripts/mkdep init/*.c > .tmpdepend
scripts/mkdep `find $(FINDHPATH) -follow -name \*.h ! -name modversions.h
-print` > .hdepend
set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i fastdep; done
mv .tmpdepend .depend
MODVERFILE :=
ifdef CONFIG_MODVERSIONS
MODVERFILE := $(TOPDIR)/include/linux/modversions.h
endif
depend dep: dep-files $(MODVERFILE)
checkconfig:
perl -w scripts/checkconfig.pl `find * -name '*.[hcS]' -print | sort`
ifdef CONFIGURATION
..$(CONFIGURATION):
@echo
@echo "You have a bad or nonexistent" .$(CONFIGURATION) ": running 'make"
$(CONFIGURATION)"'"
@echo
$(MAKE) $(CONFIGURATION)
@echo
@echo "Successful. Try re-making (ignore the error that follows)"
@echo
exit 1
#dummy: ..$(CONFIGURATION)
dummy:
else
dummy:
endif
include Rules.make
#
# This generates dependencies for the .h files.
#
scripts/mkdep: scripts/mkdep.c
$(HOSTCC) $(HOSTCFLAGS) -o scripts/mkdep scripts/mkdep.c
RES
-*************************
Luca Perugini
Laureando in Ing.Informatica
LinuxManship
WebMaster http://www.uisp.it
System Manager at uisp.it
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
-**************************
