Christian Robottom Reis wrote:
On Tue, 30 May 2000, Juri Haberland wrote:
Luca Berra wrote:
get the latest lilo from metalab, it understands raid
But it does not really work.
If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to both
disks. But booting from the
get the latest lilo from metalab, it understands raid
But it does not really work.
If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to both
disks. But booting from the second disk in the array is not possible.
I always get "error: 0x80" or similar right after the LILO
BTW- The 'lilo' and kernel with comes with the VA-Linux distro for
their hardware (based on RH6.2) seems to have the current patches and
worked flawlessly for me. Maybe you can grab the SRPM's for those?
Phil
On Fri, Jun 09, 2000 at 10:49:19AM -0800, Michael wrote:
get the latest lilo
on 5/30/00 6:52 PM, Michael wrote:
this brings me back to my original post in this thread. I get an
error when I try to specify the "real" device and the MBR does not
get written. do I have to stop the raid for the boot partition and
mount the partitions as individual sdx ? I would
get the latest lilo from metalab, it understands raid
L.
On Tue, May 30, 2000 at 03:22:29AM -0700, Gavin Clark wrote:
Hi, I have a raid level 1 on 2 scsi drives and an IDE drive.
I'm trying to set MBR on all my drives so if the first one goes down the
system will still boot.
--
Luca Berra
What is the version and can't tell me where exactly the URL?
-Original Message-
From: Luca Berra [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 9:18 AM
To: [EMAIL PROTECTED]
Subject:Re: boot redundancy - writing lilo to each drive?
get the latest lilo from metalab
Luca Berra wrote:
get the latest lilo from metalab, it understands raid
But it does not really work.
If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to both
disks. But booting from the second disk in the array is not possible.
I always get "error: 0x80" or similar right after
If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to both
disks. But booting from the second disk in the array is not possible.
I always get "error: 0x80" or similar right after the LILO prompt.
Any hints?
I find that `default=linux' (or whatever the actual default is)
and
Luca Berra wrote:
get the latest lilo from metalab, it understands raid
But it does not really work.
If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to
both disks. But booting from the second disk in the array is not
possible. I always get "error: 0x80" or similar
this brings me back to my original post in this thread. I get an
error when I try to specify the "real" device and the MBR does not
get written. do I have to stop the raid for the boot partition and
mount the partitions as individual sdx ? I would think that if I
tell lilo to write the MBR
10 matches
Mail list logo