this is a re-post, but i thought it might be of interest under a
different title...
Stephen Waters wrote:
>
> so to clarify, the solution for removing, adding, and spinning up a
> scsi disk drive is:
>
> echo "scsi remove-single-device a b c d" >/proc/scsi/scsi
> echo "scsi add-single-device a b c d " >/proc/scsi/scsi
>
> in line 2, the space after the d is important due to a bug
>
> where:
> a is Host No (usually 0)
> b is Channel (usually 0 or 1)
> c is Device Id
> d is LUN (usually 0)
>
> could jakob add this in to the howto in the hotswapping section?
>
> --
> stephen waters
> amicus, inc.
>
> Lance Robinson wrote:
> >
> > OOPS! I copied the first echo line, but didn't edit it.
> >
> > > Lance Robinson wrote:
> > > >
> > > > You should first use:
> > > > echo "scsi remove-single-device a b c d" >/proc/scsi/scsi
> > > > then use:
> > > > echo "scsi remove-single-device a b c d " >/proc/scsi/scsi
> >
> > The second echo should be add-single-device....
> > After a device is removed, an add will cause it to spin-up.
> >
> > >
> > > I have no problem with remove. My problem is about getting my disk to
> > > spin up again after insertion. But thanks anyway.
> > > <tomas/>
> > >