The parent clock isn't documented in the datasheet, use S2D1 as a best
guess for now.
Signed-off-by: Laurent Pinchart
---
drivers/clk/shmobile/r8a7795-cpg-mssr.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c
b/drivers/clk/shmobile/r
The r8a7795 has 9 VSP instances with various capabilities.
Only the VSPD instances are currently enabled as the other 5 instances
cause the following crash when reading the version register.
[5.284206] Bad mode in Error handler detected, code 0xbf02 -- SError
[5.287590] CPU: 0 PID: 51
The parent clock hasn't been validated yet.
Signed-off-by: Laurent Pinchart
---
drivers/clk/shmobile/r8a7795-cpg-mssr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c
b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
index ae5004ee7bdd..a301a5e14498 100644
-
The FCP is a companion module of video processing modules in the
Renesas R-Car Gen3 SoCs. It provides data compression and decompression,
data caching, and converting of AXI transaction in order to reduce the
memory bandwidth.
The driver is not meant to be used standalone but provides an API to th
The FCPs handle the interface between various IP cores and memory. Add
the instances related to the VSP2s.
Signed-off-by: Laurent Pinchart
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 63
1 file changed, 63 insertions(+)
diff --git a/arch/arm64/boot/dts/renesa
Remove the HAS_LUT flag in the corresponding device information entry.
Signed-off-by: Laurent Pinchart
---
drivers/media/platform/vsp1/vsp1_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c
b/drivers/media/platform/vsp1/vsp1_drv.c
i
Only the VGA output is supported for now.
Signed-off-by: Laurent Pinchart
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 44 ++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
b/arch/arm64/boot/dts/renesas/r8a7795-s
Add the DU device to r8a7795.dtsi in a disabled state.
Signed-off-by: Laurent Pinchart
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 46
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
b/arch/arm64/boot/dts/renesas/r8a779
On some platforms the VSP performs memory accesses through an FCP. When
that's the case get a reference to the FCP from the VSP DT node and
enable/disable it at runtime as needed.
Signed-off-by: Laurent Pinchart
---
.../devicetree/bindings/media/renesas,vsp1.txt | 5 +
drivers/media/pla
Hello,
This RFC patch series implements support for the Frame Compression Processor
(FCP) modules found in the Renesas R-Car Gen3 SoCs.
The FCP is a companion module for various video processing modules in the Gen3
family SoCs. It provides data compression and decompression, data caching and
conv
When finishing the Porter sound support patch, I managed to call the JP3
jumper SW3 in the comment. Fix this along with (also miscalled) jumper
positions...
Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
Reported-by: Kuninori Morimoto
Signed-off-by: Sergei Shtylyov
---
This patch
Simon,
On Thu, Feb 11, 2016 at 9:22 AM, Simon Horman wrote:
> On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote:
>> Hi,
>>
>> On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman wrote:
>> > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
>> >> Hi Olof,
>> >>
>> >> On
Define the SILK board dependent part of the R8A7794 sound device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device and the codec.
This patch is based on the commit 493b4da7c10c ("ARM: dts: porte
On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote:
> Hi,
>
> On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman wrote:
> > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
> >> Hi Olof,
> >>
> >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson wrote:
> >> > On Thu, Feb
From: Wolfram Sang
Registers are 64bit apart, so we refactor bus_shift handling a little
and set it based on the DT compatible. Also, EXT_ACC is different.
Signed-off-by: Ai Kyuse
Signed-off-by: Wolfram Sang
---
Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 1 +
drivers/mmc/host/Kconf
On 11/02/16 00:02, Laurent Pinchart wrote:
Hi Niklas,
Thank you for the patch.
On Wednesday 10 February 2016 01:57:51 Niklas Söderlund wrote:
From: Robin Murphy
On some platforms, MMIO regions might need slightly different treatment
compared to mapping regular memory; add the notion of MMIO
On 11 February 2016 at 14:32, Wolfram Sang wrote:
> On Thu, Feb 11, 2016 at 10:00:50AM +0100, Ulf Hansson wrote:
>> On 11 February 2016 at 01:07, Wolfram Sang wrote:
>> >> I suspect you are using a delayed work in this driver to deal with
>> >> request timeouts.
>> >>
>> >> The value for the dela
On Thu, Feb 11, 2016 at 10:00:50AM +0100, Ulf Hansson wrote:
> On 11 February 2016 at 01:07, Wolfram Sang wrote:
> >> I suspect you are using a delayed work in this driver to deal with
> >> request timeouts.
> >>
> >> The value for the delay that is used, needs to be informed towards the
> >> mmc
On 11 February 2016 at 01:07, Wolfram Sang wrote:
>> I suspect you are using a delayed work in this driver to deal with
>> request timeouts.
>>
>> The value for the delay that is used, needs to be informed towards the
>> mmc core via the "->max_busy_timeout".
>
> Shouldn't that be a seperate patch
19 matches
Mail list logo