Hi Mathias,
> From: Yoshihiro Shimoda, Sent: Friday, March 17, 2017 7:03 PM
>
> This patch adds support suspend/resume for R-Car controllers.
> The controllers need firmware downloading and the current code has
> such process only when probe timing. After suspend the system and
> the power of
Hello,
On Thursday 16 Feb 2017 11:02:55 Ramesh Shanmugasundaram wrote:
> Hi Rob,
>
> Thank you for the review comments.
>
> > Subject: Re: [PATCH v3 6/7] dt-bindings: media: Add Renesas R-Car DRIF
> > binding
> >
> > On Tue, Feb 07, 2017 at 03:02:36PM +, Ramesh Shanmugasundaram wrote:
> >>
Hi Ramesh,
Thank you for the patch.
On Tuesday 07 Feb 2017 15:02:36 Ramesh Shanmugasundaram wrote:
> Add binding documentation for Renesas R-Car Digital Radio Interface
> (DRIF) controller.
>
> Signed-off-by: Ramesh Shanmugasundaram
>
> ---
>
Hi Laurent,
> On Tuesday 11 Apr 2017 09:57:45 Ramesh Shanmugasundaram wrote:
> > > On Tuesday 07 Feb 2017 15:02:32 Ramesh Shanmugasundaram wrote:
> > >> Add device tree binding documentation for MAX2175 Rf to bits tuner
> > >> device.
> > >>
> > >> Signed-off-by: Ramesh Shanmugasundaram
> > >>
Hi Ramesh,
On Tuesday 11 Apr 2017 09:57:45 Ramesh Shanmugasundaram wrote:
> > On Tuesday 07 Feb 2017 15:02:32 Ramesh Shanmugasundaram wrote:
> >> Add device tree binding documentation for MAX2175 Rf to bits tuner
> >> device.
> >>
> >> Signed-off-by: Ramesh Shanmugasundaram
> >>
Hi Laurent,
Thanks for the review comments.
>
> On Tuesday 07 Feb 2017 15:02:32 Ramesh Shanmugasundaram wrote:
> > Add device tree binding documentation for MAX2175 Rf to bits tuner
> > device.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > ---
> >
Hi Ramesh,
Thank you for the patch.
On Tuesday 07 Feb 2017 15:02:32 Ramesh Shanmugasundaram wrote:
> Add device tree binding documentation for MAX2175 Rf to bits tuner
> device.
>
> Signed-off-by: Ramesh Shanmugasundaram
> ---
>
Hi Geert
Thank you for your feedback
> > +- auxoutsrc: select AUX_OUT source from these.
> > + refclk: Timing Reference Clock
> > + clk_in: Frequency Reference Clock
> > +
Hi Linus,
On Tue, Apr 11, 2017 at 11:05 AM, Linus Walleij
wrote:
> On Wed, Apr 5, 2017 at 4:07 PM, Jacopo Mondi
> wrote:
>> Hi Linus,
>>this is 4th round of gpio/pincontroller for RZ/A1 devices.
>>
>> As you suggested in v3 review, I
On Wed, Apr 5, 2017 at 4:07 PM, Jacopo Mondi wrote:
> Hi Linus,
>this is 4th round of gpio/pincontroller for RZ/A1 devices.
>
> As you suggested in v3 review, I have now added what we called pinmux flags
> to the list of standard pinconf generic properties, and
On Wed, Apr 5, 2017 at 4:07 PM, Jacopo Mondi wrote:
> Add bi-directional and output-enable pin configuration properties.
>
> bi-directional allows to specify when a pin shall operate in input and
> output mode at the same time. This is particularly useful in platforms
Hi Morimoto-san,
On Tue, Apr 11, 2017 at 2:36 AM, Kuninori Morimoto
wrote:
> From: Kuninori Morimoto
>
> Signed-off-by: Kuninori Morimoto
> Tested-by: Hiroyuki Yokoyama
Hi Ramesh,
Thank you for the patch.
On Tuesday 07 Feb 2017 15:02:31 Ramesh Shanmugasundaram wrote:
> Reserve controls for MAX217X RF to Bits tuner family. These hybrid
> radio receiver chips are highly programmable and hence reserving 32
> controls.
>
> Signed-off-by: Ramesh Shanmugasundaram
>
On Mon, Apr 10, 2017 at 8:12 PM, Rob Herring wrote:
> On Wed, Apr 05, 2017 at 04:07:21PM +0200, Jacopo Mondi wrote:
>> + The allowed generic formats for a pin multiplexing sub-node are the
>> + following ones:
>> +
>> + node-1 {
>> + pinmux = , , ... ;
>> +
14 matches
Mail list logo