Hi Simon, Geert,
Do you need extra actions from my side to accept this patch?
On 20.09.2017 15:32, Geert Uytterhoeven wrote:
Hi Vladimir,
[CC Pantelis]
On Thu, Sep 14, 2017 at 4:18 PM, Vladimir Barinov
wrote:
Add the initial device tree for the M3ULCB
Hi Biju-san,
(+ Felipe-san)
Thank you for the patch!
> From: Biju Das, Sent: Friday, October 6, 2017 12:13 AM
>
> This patch adds support for r8a7743/5 SoC. The Renesas RZ/G1[ME]
> (R8A7743/5) usbhs is identical to the R-Car Gen2 family.
>
> This doesn't change the driver, so it does nothing
This supports TCA9539 gpio expanders on I2C4 bus on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
---
Changes in version 2:
- use generic node name "gpio"
Changes in version 3:
- changed pca9539 to tca9539
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi |
This supports TCA9539 gpio expanders on I2C2 bus on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
---
Changes in version 2:
- use generic node name "gpio"
Changes in version 3:
- changed pca9539 to tca9539
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi |
This supports SCIF1 on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
Reviewed-by: Geert Uytterhoeven
---
Changes in version 2:
- added rtc/cts
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 13 +
1 file changed, 13
This supports PCIE0/1 on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
Reviewed-by: Geert Uytterhoeven
---
Changes in version 2:
- removed status update for pcie_bus_clk
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 13
Hi Geert,
On 20.09.2017 16:44, Geert Uytterhoeven wrote:
Hi Vladimir,
On Thu, Sep 14, 2017 at 4:19 PM, Vladimir Barinov
wrote:
This supports PCA9539 gpio expanders on I2C2 bus on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
Hi Geert,
Thank you for the review.
On 20.09.2017 15:59, Geert Uytterhoeven wrote:
Hi Vladimir,
On Thu, Sep 7, 2017 at 12:36 AM, Vladimir Barinov
wrote:
This supports USB2 PHY channel #0 on ULCB Kingfisher board
Signed-off-by: Vladimir Barinov
Hi Kishon,
Would you review this patch set?
I checked this can apply your latest linux-phy.git / next branch (the commit id
= 415060b21f31).
Best regards,
Yoshihiro Shimoda
> -Original Message-
> From: Yoshihiro Shimoda
> Sent: Friday, September 1, 2017 11:41 AM
> To: kis...@ti.com
>
On Thu, Sep 28, 2017 at 11:07:38PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> On 09/28/2017 06:53 PM, Geert Uytterhoeven wrote:
>
> > The optional "reset-gpios" property (part of the generic MDIO bus
> > properties) lets us describe the GPIO used for resetting the Ethernet
> > PHY.
> >
> >
Morimoto-san,
> But, I2C is not yet supported on H3 ES2.0 "PFC",
This is out now:
[PATCH] pinctrl: sh-pfc: r8a7795: add I2C pin support
and Geert already picked it up.
Regards,
Wolfram
signature.asc
Description: PGP signature
On Thu, Oct 5, 2017 at 2:25 PM, Geert Uytterhoeven wrote:
> On Thu, Oct 5, 2017 at 2:09 PM, Arnd Bergmann wrote:
>> arch/arm/mach-shmobile/headsmp-apmu.S | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S
>>
On 10/05/2017 12:05 PM, Simon Horman wrote:
Define the Eagle board dependent part of the EtherAVB device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov
tree: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
topic/rcar-gen3-z-clk-v3
head: 4b41ea6e92cdc7fce15ba99b02c40938a134cff7
commit: fda8dbe29dd1f04b61c443147a106962cf5d3f14 [2/6] clk: renesas: rcar-gen3:
Add Z2 clock divider support
config: i386-allmodconfig (attached as
This patch adds support for r8a7743/5 SoC. The Renesas RZ/G1[ME]
(R8A7743/5) usbdmac engine is identical to the R-Car Gen2 family.
This doesn't change the driver, so it does nothing by itself. But it does
mean that checkpatch won't complain about a future patch that adds
This patch adds support for r8a7743/5 SoC. The Renesas RZ/G1[ME]
(R8A7743/5) usbhs is identical to the R-Car Gen2 family.
This doesn't change the driver, so it does nothing by itself. But it does
mean that checkpatch won't complain about a future patch that adds
"renesas,usbhs-r8a7743" or
On 05/10/17 14:26, Simon Horman wrote:
> From: Dien Pham
>
> Current, OPP tables are defined temporary,
> they are being evaluated and adjust in future.
>
I assume these OPPs will continue to work in future but just not optimal.
> Based in part on work by Hien
These are dependencies for supporting CPUFreq. The remainder of that
work is being posted separately and can be found at:
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
topic/rcar-gen3-cpufreq-v3
A description of steps taken to lightly exercise the same feature for the
From: Dien Pham
Current, OPP tables are defined temporary,
they are being evaluated and adjust in future.
Based in part on work by Hien Dang.
Signed-off-by: Dien Pham
Signed-off-by: Takeshi Kihara
From: Takeshi Kihara
This patch adds Z clock for R8A7796 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
Reviewed-by: Geert Uytterhoeven
---
From: Takeshi Kihara
This patch adds Z2 clock for R8A7796 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
Reviewed-by: Geert Uytterhoeven
---
From: Takeshi Kihara
This patch adds Z2 clock for r8a7795 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
Reviewed-by: Geert Uytterhoeven
---
Hi,
this patch-set adds Z and Z2 clock support.
These are dependencies for supporting CPUFreq. The remainder of that
work is being posted separately and can be found at:
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
topic/rcar-gen3-cpufreq
A description of steps taken to
From: Takeshi Kihara
This patch adds Z clock divider support for R-Car Gen3 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
---
v2 [Simon Horman]
* Use DIV_ROUND_CLOSEST_ULL instead of
From: Takeshi Kihara
This patch adds Z2 clock divider support for R-Car Gen3 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
---
v2 [Simon Horman]
* Consolidate Z and Z2 clock ops
* Allow
From: Takeshi Kihara
This patch adds Z clock for R8A7795 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Simon Horman
Reviewed-by: Geert Uytterhoeven
---
Move the SCIF_CLK pins where they belong.
Signed-off-by: Geert Uytterhoeven
---
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 32
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
Hi,
This patch series restores sort order in the R-Car H3 pinctrl files.
Queuing up in sh-pfc-for-v4.15, as usual.
Geert Uytterhoeven (2):
pinctrl: sh-pfc: r8a7795-es1: Restore sort order
pinctrl: sh-pfc: r8a7795: Restore sort order
drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 34
Move the USB30 pins where they belong.
Signed-off-by: Geert Uytterhoeven
---
drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 34
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
> Thank you Uffe. I guess the patch is alright then.
>
> Wolfram, do you want to add a Tested-by?
Sure:
Reviewed-by: Wolfram Sang
Tested-by: Wolfram Sang
signature.asc
Description: PGP signature
> [...]
>
> >>
> >> Well, the good news is that it didn't cause a regression for me on R-Car
> >> E2 (Alt board) and H3 (Salvator X board).
> >>
> >> Sadly, it doesn't also fix the SDR104 problems on Alt. I had a little
> >> hope this could be the culprit, but sadly it is not. But this is not a
>
Hi Arnd,
On Thu, Oct 5, 2017 at 2:09 PM, Arnd Bergmann wrote:
> A bugfix for the SMP case broke the build for the UP case:
>
> arch/arm/mach-shmobile/headsmp-apmu.o: In function `shmobile_boot_apmu':
> (.text+0x34): undefined reference to `secondary_startup'
>
> The assembler file
A bugfix for the SMP case broke the build for the UP case:
arch/arm/mach-shmobile/headsmp-apmu.o: In function `shmobile_boot_apmu':
(.text+0x34): undefined reference to `secondary_startup'
The assembler file mixes code that is used for SMP with code
that we also need on a single-CPU build, so
[...]
>>
>> Well, the good news is that it didn't cause a regression for me on R-Car
>> E2 (Alt board) and H3 (Salvator X board).
>>
>> Sadly, it doesn't also fix the SDR104 problems on Alt. I had a little
>> hope this could be the culprit, but sadly it is not. But this is not a
>> problem with
Hi,
> From: Geert Uytterhoeven, Sent: Wednesday, October 4, 2017 9:25 PM
>
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Thank you for the patch!
Reviewed-by: Yoshihiro Shimoda
Hi,
> From: Geert Uytterhoeven, Sent: Wednesday, October 4, 2017 9:27 PM
>
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Thank you for the patch!
Reviewed-by: Yoshihiro Shimoda
Hi,
> From: Geert Uytterhoeven, Sent: Wednesday, October 4, 2017 9:24 PM
>
> Use the of_device_get_match_data() helper instead of open coding,
> postponing the matching until when it's really needed.
> Note that the renesas_usb3 driver is used with DT only, so there's
> always a valid match.
>
On 05.10.2017 12:19, Simon Horman wrote:
On Wed, Oct 04, 2017 at 02:25:03PM +0200, Geert Uytterhoeven wrote:
Use the of_device_get_match_data() helper instead of open coding.
Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
Hi Wolfram, Ulf
> Hi Fabrizio,
>
> On Wed, Oct 04, 2017 at 10:50:54AM +, Fabrizio Castro wrote:
> > Thank you guys for your comments!
> >
> > > > > However, there are side effects to it as the mmc devices will be
> > > > > enumerated
> > > > > in a different order (due to -EPROBE_DEFER),
On 4 October 2017 at 19:39, Wolfram Sang
wrote:
> Parse the new binding and store it in the host struct after doing some
> sanity checks. The code is designed to support fixed SD driver type if
> we ever need that.
>
> Signed-off-by: Wolfram Sang
On Thu, Oct 05, 2017 at 11:02:30AM +0200, Geert Uytterhoeven wrote:
> On Thu, Oct 5, 2017 at 10:58 AM, Jacopo Mondi
> wrote:
> > MTU2 multi-function/multi-channel timer/counter is not enabled for
> > GR-Peach board. The timer is used as clock event source to schedule
>
On Thu, Oct 05, 2017 at 10:58:18AM +0200, Jacopo Mondi wrote:
> Fix 'leds' node name indent as it was wrongly aligned.
>
> Signed-off-by: Jacopo Mondi
Thanks, applied.
On Thu, Oct 05, 2017 at 10:41:47AM +0200, jacopo mondi wrote:
> Hi Simon, Sergei
>
> On Wed, Oct 04, 2017 at 07:03:35PM +0300, Sergei Shtylyov wrote:
> > On 10/04/2017 06:41 PM, Jacopo Mondi wrote:
> >
> > >Fix 'leds' label indent as it was wrongly aligned
> >
> >It's not a label, it's node
On Wed, Oct 04, 2017 at 02:33:08PM +0200, Geert Uytterhoeven wrote:
> Use the preferred generic node name in the example.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:26:48PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:25:03PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:23:31PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding,
> postponing the matching until when it's really needed.
> Note that the renesas_usb3 driver is used with DT only, so there's
> always a valid match.
>
>
On Wed, Oct 04, 2017 at 02:21:56PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
> Note that when used with DT, there's always a valid match.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:17:58PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:17:05PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:16:16PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
> Note that the gpio-rcar driver is used with DT only, so there's always a
> valid match.
>
> Signed-off-by: Geert Uytterhoeven
On Wed, Oct 04, 2017 at 02:13:07PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
> Note that the sata_rcar driver is used with DT only, so there's always a
> valid match.
>
> Signed-off-by: Geert Uytterhoeven
On Wed, Oct 04, 2017 at 02:08:26PM +0200, Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
> Note that the rcar-gyroadc driver is used with DT only, so there's
> always a valid match.
>
> Signed-off-by: Geert Uytterhoeven
On Wed, Oct 04, 2017 at 02:08:25PM +0200, Geert Uytterhoeven wrote:
> The rcar-gyroadc driver compiles fine on other platforms, hence increase
> compile coverage.
>
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
On Wed, Oct 04, 2017 at 02:08:24PM +0200, Geert Uytterhoeven wrote:
> On 64-bit:
>
> drivers/iio/adc/rcar-gyroadc.c: In function 'rcar_gyroadc_parse_subdevs':
> drivers/iio/adc/rcar-gyroadc.c:352:15: warning: cast from pointer to
> integer of different size [-Wpointer-to-int-cast]
>
On Wed, Oct 04, 2017 at 01:34:24PM +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
> ---
> MAINTAINERS | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
>
On Wed, Oct 04, 2017 at 04:38:08PM +0200, Geert Uytterhoeven wrote:
> On Wed, Oct 4, 2017 at 12:27 PM, Yoshihiro Shimoda
> wrote:
> > This patch enables PWM channel 0 and 1 on the draak. Each channel
> > connects to LTC2644 for brightness control.
> >
> >
Hi Jacopo,
On Thu, Oct 5, 2017 at 10:58 AM, Jacopo Mondi wrote:
> Add pin configuration subnode for ETHER pin group and enable the interface.
>
> Signed-off-by: Jacopo Mondi
Reviewed-by: Geert Uytterhoeven
> ---
On Wed, Oct 04, 2017 at 04:02:05PM +0200, Geert Uytterhoeven wrote:
> On Wed, Oct 4, 2017 at 12:27 PM, Yoshihiro Shimoda
> wrote:
> > This patch adds PWM device nodes for r8a77995.
> >
> > Signed-off-by: Yoshihiro Shimoda
>
>
On Wed, Oct 04, 2017 at 03:53:36PM +0200, Geert Uytterhoeven wrote:
> On Tue, Oct 3, 2017 at 10:01 AM, Yoshihiro Shimoda
> wrote:
> > Since a R-Car Gen3 bootloader enables the PFC of USB3.0 channel 0,
> > the USB3.0 host controller works without this setting on
On Thu, Sep 21, 2017 at 06:09:34PM +0200, Geert Uytterhoeven wrote:
> Hi Sergei,
>
> On Thu, Sep 21, 2017 at 6:03 PM, Sergei Shtylyov
> wrote:
> > On 9/21/2017 4:08 PM, Geert Uytterhoeven wrote:
> >>> Define the Eagle board dependent part of the EtherAVB
On Wed, Oct 04, 2017 at 01:10:26PM +0200, Geert Uytterhoeven wrote:
> Hi Sergei,
>
> On Wed, Oct 4, 2017 at 1:03 PM, Sergei Shtylyov
> wrote:
> > On 9/21/2017 4:18 PM, Geert Uytterhoeven wrote:
> >>> Add the initial device tree for the R8A77970 SoC based
On Thu, Oct 5, 2017 at 10:58 AM, Jacopo Mondi wrote:
> MTU2 multi-function/multi-channel timer/counter is not enabled for
> GR-Peach board. The timer is used as clock event source to schedule
> wake-ups, and without this enabled all sleeps not performed through busy
>
Hello,
this series includes three patches for GR-Peach DTS.
The first, very trivial one is the re-proposal of the already sent patch, with
the commit message updated as suggested by Sergei.
The second just enables the Multi-function timer/counter unit which was
disabled and is actually used
Fix 'leds' node name indent as it was wrongly aligned.
Signed-off-by: Jacopo Mondi
---
arch/arm/boot/dts/r7s72100-gr-peach.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts
MTU2 multi-function/multi-channel timer/counter is not enabled for
GR-Peach board. The timer is used as clock event source to schedule
wake-ups, and without this enabled all sleeps not performed through busy
waiting hang the board.
Signed-off-by: Jacopo Mondi
---
Hi Simon, Sergei
On Wed, Oct 04, 2017 at 07:03:35PM +0300, Sergei Shtylyov wrote:
> On 10/04/2017 06:41 PM, Jacopo Mondi wrote:
>
> >Fix 'leds' label indent as it was wrongly aligned
>
>It's not a label, it's node name. :-)
You're so right!
As I have other 3 patches to send out for GR-Peach,
Hi Jacopo,
On Thu, Oct 5, 2017 at 9:48 AM, jacopo mondi wrote:
> On Wed, Oct 04, 2017 at 05:54:46PM +0200, Geert Uytterhoeven wrote:
>> On Wed, Oct 4, 2017 at 5:40 PM, Jacopo Mondi
>> wrote:
>> > The system clock described by extal_clk is reported
Hi Geert
On Wed, Oct 04, 2017 at 05:54:46PM +0200, Geert Uytterhoeven wrote:
> Hi Jacopo,
>
> On Wed, Oct 4, 2017 at 5:40 PM, Jacopo Mondi
> wrote:
> > The system clock described by extal_clk is reported to have a frequency
> > of 13.333 Mhz and is correctly described
On Wed, 4 Oct 2017 14:19:03 +0200
Geert Uytterhoeven wrote:
> Use the of_device_get_match_data() helper instead of open coding.
> While at it, make config const so the cast can be dropped.
>
Applied.
Thanks,
Boris
> Signed-off-by: Geert Uytterhoeven
70 matches
Mail list logo