for the confirmation.
Regards
RKP
On 9/2/2016 1:30 PM, Geert Uytterhoeven wrote:
Hi RKP,
On Fri, Sep 2, 2016 at 9:19 AM, Roopesh K P <roopes...@tataelxsi.co.in> wrote:
I assume Koelsch and Porter boards have not much difference in their make
(both are using R-CAR M2 as SoC) and I can boot a Koelsch
is ,
Is it not possible to test native (real hardware) CAN interface like
can0 in Koelsch or ALT board ?
Regards
RKP
On 8/30/2016 6:18 PM, Geert Uytterhoeven wrote:
On Tue, Aug 30, 2016 at 1:36 PM, Roopesh K P <roopes...@tataelxsi.co.in> wrote:
I'm trying to use native (real hardware) interface
Hello Renesas SoC,
I am following steps for flashing u-boot in Lager board (R-CAR H2) by
changing the SW17 to 3pin and reset the board to start mini monitor.
After setting dip switch SW17 to 1pin, give the Input User Program Start
Address as e808 and write the u-boot.srec.
Now I am
I'm trying to use native (real hardware) interfaces like can0 in R-CAR
E2 based board (RTP0RC7794SEB00011S - ALT board). I am able to configure
the CAN interfaces (can0 and can1). While testing, CAN driver seems to
be able to send the CAN packets but not able to receive CAN packets from
bus.
