Hi Morimoto-san,
On Monday, 12 November 2018 05:09:13 EET Kuninori Morimoto wrote:
> Hi Laurent
>
> >> I noticed Salvator can't boot if .config has CONFIG_COMMON_CLK_VC5.
> >> This means, Salvator and ULCB can't use same binary so far for me
> >> (= all modules are =y on .config).
> >> I'm using
Hi Laurent
> > I noticed Salvator can't boot if .config has CONFIG_COMMON_CLK_VC5.
> > This means, Salvator and ULCB can't use same binary so far for me
> > (= all modules are =y on .config).
> > I'm using previous attached .config + your patch + CONFIG_COMMON_CLK_VC5
(snip)
> I'm afraid I
Hi Morimoto-san,
On Friday, 9 November 2018 04:23:36 EET Kuninori Morimoto wrote:
> Hi Laurent
>
> >>> I tried to reproduce the problem, starting with drm-next which seems
> >>> to work fine, moving to renesas-drivers-2018-10-09-v4.19-rc7 which
> >>> also didn't exhibit any issue. I then used
Hi Laurent
> > > I tried to reproduce the problem, starting with drm-next which seems to
> > > work
> > > fine, moving to renesas-drivers-2018-10-09-v4.19-rc7 which also didn't
> > > exhibit any issue. I then used your kernel configuration, and got a
> > > WARN_ON
> > > \o/
> >
> >
Hi Laurent
Thank you for your help
> > I tried to reproduce the problem, starting with drm-next which seems to work
> > fine, moving to renesas-drivers-2018-10-09-v4.19-rc7 which also didn't
> > exhibit any issue. I then used your kernel configuration, and got a WARN_ON
> > \o/
>
>
Hi Morimoto-san,
On Tuesday, 6 November 2018 16:30:35 EET Laurent Pinchart wrote:
> On Thursday, 18 October 2018 05:12:14 EET Kuninori Morimoto wrote:
> > Hi Vladimir, Laurent
> >
> > I'm testing ULCB board, and I noticed that HDMI doen't work on it.
> >
> > - Sometimes kernel panic happen
Hi Morimoto-san,
On Thursday, 18 October 2018 05:12:14 EET Kuninori Morimoto wrote:
> Hi Vladimir, Laurent
>
> I'm testing ULCB board, and I noticed that HDMI doen't work on it.
>
> - Sometimes kernel panic happen (I lost log, but it said "get crc"
> something error), - Often, kernel
Hi Laurent
> > I'm testing ULCB board, and I noticed that HDMI doen't work on it.
>
> Which ULCB board is this ?
I'm using R-Car H3 v2.0 ULCB board.
> > -- kernel log -
> > ...
> > [1.728010] renesas_irqc e61c.interrupt-controller: driving 6 irqs
> > [1.739166] [drm]
Hi Morimoto-san,
On Thursday, 18 October 2018 05:12:14 EEST Kuninori Morimoto wrote:
> Hi Vladimir, Laurent
>
> I'm testing ULCB board, and I noticed that HDMI doen't work on it.
Which ULCB board is this ?
> - Sometimes kernel panic happen (I lost log, but it said "get crc"
> something
