Audio subsystem introduced in s5pv210 and exynos platforms
which has a internal clock controller. This patch adds a node
for the same on exynos5250.
Signed-off-by: Padmavathi Venna
---
arch/arm/boot/dts/exynos5250.dtsi |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a
Add clock lookup information for i2s controllers on exynos5250 SoC.
Signed-off-by: Padmavathi Venna
---
arch/arm/boot/dts/exynos5250.dtsi | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
inde
Audio subsystem is introduced in s5pv210 and exynos platforms.
This has seperate clock controller which can control i2s0 and
pcm0 clocks. This patch registers the audio subsystem clocks
with the common clock framework.
Signed-off-by: Padmavathi Venna
---
.../bindings/clock/clk-samsung-audss.txt
Samsung S5PV210 and Exynos SoC has a separate subsystem for audio. This
subsystem
has a internal clock controller which controls i2s0 and pcm0 clocks. This patch
series adds the Samsung audio subsytem clock to the common clock framework and
provides the I2S controllers clock information in the dts
Replace /include/ (dtc) with #include (C pre-processor) for all
Samsung DT files
Signed-off-by: Padmavathi Venna
---
This patch is dependent on below patches by Stephen Warren
http://www.spinics.net/lists/linux-kbuild/msg07616.html
arch/arm/boot/dts/exynos4.dtsi|2 +-
arch/arm/
This patch is a modification from the Christoffer Dall's u-boot
patch. This is required to put the secondary processors in hyp
mode during cpu hotplug when u-boot is no longer alive.
Marc Zyngier suggested this logic to go into firmware or, u-boot
putting a trampoline code into a page /memreserve/
From: Giridhar Maruthy
In intial boot-up, u-boot commit "3d28a181aab5e... arndale5250: Boot in Hyp
mode and enable architected timers" puts the CPUs in HYP mode.
Hence, the CPUs need to be put in HYP mode when they are hot plugged out and
plugged in back.
This patch is almost same as above u-bo
Hi,
On Tue, May 7, 2013 at 10:28 AM, Sascha Hauer wrote:
> Hi,
>
> On Tue, May 07, 2013 at 09:07:33AM +0530, Padmavathi Venna wrote:
>> This patch corrects the base address of pinctrl_3 on Exynos5250
>> platform.
>
> Exynos5250 should be part of the subject so that other people can know
> whether
Hi,
On Tue, May 07, 2013 at 09:07:33AM +0530, Padmavathi Venna wrote:
> This patch corrects the base address of pinctrl_3 on Exynos5250
> platform.
Exynos5250 should be part of the subject so that other people can know
whether this patch is interesting for them or not.
Sascha
--
Pengutronix e.
This patch fixes a null pointer deference in i2s driver in DT
case
Signed-off-by: Padmavathi Venna
---
This patch is dependent on below patch posted by Thomas Abraham.
https://patchwork.kernel.org/patch/2224801/
sound/soc/samsung/i2s.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-
This patch corrects the base address of pinctrl_3 on Exynos5250
platform.
Signed-off-by: Padmavathi Venna
---
This patch is dependent on below patch posted by Thomas Abraham.
https://patchwork.kernel.org/patch/2225151/
arch/arm/boot/dts/exynos5250-pinctrl.dtsi |2 +-
arch/arm/boot/dts/exyn
From: Naveen Krishna Chatradhi
Adds support for High Speed I2C driver found in Exynos5 and
later SoCs from Samsung.
Driver only supports Device Tree method.
Changes since v1:
1. Added FIFO functionality
2. Added High speed mode functionality
3. Remove SMBUS_QUICK
4. Remove the debugfs functiona
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This code splits the exynos tmu driver code into SOC specific data parts.
> This will simplify adding new SOC specific data to the same TMU controller.
>
> Acked-by: Kukjin Kim
> Signed-off-by: Amit Daniel Kachhap
I'm okay with all
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This patch renames and moves include/linux/platform_data/exynos_thermal.h to
> drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos
> SOC's are not supporting non-DT based platforms. Also the rename is needed a
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This patch renames exynos_thermal.c to exynos_tmu.c. This change is needed as
> this file now just contains exynos tmu driver related codes and thermal zone
> or cpufreq cooling registration related changes are not there anymore.
>
>
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This code bifurcates exynos thermal implementation into common and sensor
> specific parts. The common thermal code interacts with core thermal layer and
> core cpufreq cooling parts and is independent of SOC specific driver. This
> ch
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This movement of files is done for easy maintenance and adding more
> new sensor's support for exynos platform easily . This will also help in
> bifurcating exynos common, sensor driver and sensor data related parts.
>
> Acked-by: Kuk
17 matches
Mail list logo