On Wed, Aug 27, 2014 at 8:31 PM, Mark Rutland wrote:
> On Wed, Aug 27, 2014 at 03:48:27PM +0100, Ajay Kumar wrote:
>> Add DT nodes for ptn3460 bridge chip and panel.
>> Add backlight enable pin and backlight power supply for pwm-backlight.
>> Also add bridge phandle needed by dp to enable display
On Wed, Aug 27, 2014 at 9:19 PM, Doug Anderson wrote:
> Jaehoon,
>
> On Tue, Aug 26, 2014 at 9:47 PM, Jaehoon Chung wrote:
>> Doug,
>>
>> On 08/27/2014 01:14 PM, Doug Anderson wrote:
>>> Jaehoon,
>>>
>>> On Tue, Aug 26, 2014 at 8:48 PM, Jaehoon Chung
>>> wrote:
Hi, Doug,
On 08/26
Dear Andrew,
On 08/27/2014 06:31 AM, Andrew Morton wrote:
> On Mon, 25 Aug 2014 09:57:33 +0900 Chanwoo Choi wrote:
>
>> Dear Andrew,
>>
>> On 08/23/2014 05:42 AM, Andrew Morton wrote:
>>> On Tue, 12 Aug 2014 11:01:07 +0900 y...@samsung.com wrote:
>>>
This patch define s3c_rtc structure inc
Hi Jingoo,
On Wed, Aug 27, 2014 at 7:28 AM, Jingoo Han wrote:
> On Thursday, August 21, 2014 11:55 PM, Vivek Gautam wrote:
>>
>> Adding phy calibrate callback, which facilitates setting certain
>> PHY settings post initialization of the PHY controller.
>> Exynos5420 and Exynos5800 have 28nm USB
Dear Eduardo,
This patch is wrong. It is my mistake.
Please ignore only this patch because
the offset calculation of 'case 0' is different from 'case 2'.
Best Regards,
Chanwoo Choi
On 08/26/2014 10:31 AM, Chanwoo Choi wrote:
> This patch remove simply duplicate code when reading triminfo regist
Hi,
On Fri, Aug 22, 2014 at 4:19 PM, Andreas Färber wrote:
> Hi,
>
> s/Caibrate/Calibrate/
Sure, will rectify the title, thanks for pointing it out.
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung
On Wed, Aug 27, 2014 at 03:50:21PM +0100, Catalin Marinas wrote:
> On Wed, Aug 27, 2014 at 12:09:28PM +0100, Mark Rutland wrote:
> > On Wed, Aug 27, 2014 at 10:44:20AM +0100, Naveen Krishna Chatradhi wrote:
> > > + select HAVE_SMP
> >
> > I may have missed something, but I didn't see any SMP suppo
On Wed, Aug 27, 2014 at 03:16:35PM +0530, Naveen Krishna Chatradhi wrote:
> From: Alim Akhtar
>
> This patch enables upcoming exynos7 SoCs serial driver.
> This also modifies various dependencies for Kconfig
>
> Signed-off-by: Alim Akhtar
> Cc: Greg Kroah-Hartman
> ---
> drivers/tty/serial/Kc
On Wed, Aug 27, 2014 at 03:15:40PM +0530, Naveen Krishna Chatradhi wrote:
> The i2c-exynos5.c driver can be reused for the HSI2C controller
> on Exynos7 SoCs from Samsung.
>
> This patch adds the Kconfig dependency to choose i2c-exynos5.c
> for CONFIG_ARCH_EXYNOS7.
>
> Signed-off-by: Naveen Krish
Hi,
On Wed, Aug 27, 2014 at 03:14:19PM +0530, Naveen Krishna Chatradhi wrote:
> This patch adds initial dts file for the Espresso board
> based on Exynos7 from Samsung.
>
> Signed-off-by: Naveen Krishna Chatradhi
> Cc: Rob Herring
> Cc: Catalin Marinas
> ---
> arch/arm64/boot/dts/Makefile
Naveen,
On Wed, Aug 27, 2014 at 03:14:16PM +0530, Naveen Krishna Chatradhi wrote:
> This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
> Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
> ARMv8 RISC processor.
Your emails haven't threaded properly, so the series of patch
Hi,
On Wed, Aug 27, 2014 at 03:14:18PM +0530, Naveen Krishna Chatradhi wrote:
> Add initial device tree nodes for EXYNOS7 SoC.
> Also, includes the dt-binding definitions for clock ids.
Uh, no -- it just adds the dtsi.
> Signed-off-by: Naveen Krishna Chatradhi
> Cc: Thomas Abraham
> Cc: Rob He
Hi,
On 08/27/2014 07:27 PM, Andrzej Hajda wrote:
> On 08/26/2014 07:00 AM, Joonyoung Shim wrote:
>> Hi Andrzej,
>>
>> On 08/22/2014 04:52 PM, Andrzej Hajda wrote:
>>> In case of allocation errors some already allocated buffers
>>> were not freed. The patch fixes it.
>>>
>>> Signed-off-by: Andrzej
On Wednesday, August 27, 2014 04:34:28 PM Viresh Kumar wrote:
> On 27 August 2014 16:30, Mark Brown wrote:
> > From: Mark Brown
> >
> > Since this is a platform driver and can be probed at any time we can't
> > annotate funtions in the probe path as __init, the code can't safely be
> > discarded
Hello Tomasz and Mark,
Sorry for not answering before but I'm on vacations until Sep, 5 and I
have limited access to my email.
On Wed, Aug 27, 2014 at 11:03 PM, Tomasz Figa wrote:
From what I know based on my experience with Samsung boards we used, the
opmodes of regulators are preconf
On 27.08.2014 22:41, Tomasz Figa wrote:
> On 27.08.2014 22:25, Mark Brown wrote:
>> On Wed, Aug 27, 2014 at 09:58:55PM +0200, Tomasz Figa wrote:
>>> On 27.08.2014 21:44, Mark Brown wrote:
>>
The point is that if anything was setting the mode to something other
than normal it was almost ce
On Wed, Aug 27, 2014 at 10:41:42PM +0200, Tomasz Figa wrote:
> On 27.08.2014 22:25, Mark Brown wrote:
> > Well, presumably the bootloader is going to run again even for a warm
> > reboot?
> This is strange, but apparently it's not the case for the hardware which
> this patch is supposed to fix or
On 27.08.2014 22:25, Mark Brown wrote:
> On Wed, Aug 27, 2014 at 09:58:55PM +0200, Tomasz Figa wrote:
>> On 27.08.2014 21:44, Mark Brown wrote:
>
>>> The point is that if anything was setting the mode to something other
>>> than normal it was almost certainly a previously running copy of Linux
>>>
On Wed, Aug 27, 2014 at 09:58:55PM +0200, Tomasz Figa wrote:
> On 27.08.2014 21:44, Mark Brown wrote:
> > The point is that if anything was setting the mode to something other
> > than normal it was almost certainly a previously running copy of Linux
> > and one would expect that if the mode does
On 27.08.2014 21:44, Mark Brown wrote:
> On Wed, Aug 27, 2014 at 09:21:02PM +0200, Tomasz Figa wrote:
>> On 27.08.2014 21:15, Mark Brown wrote:
>
>>> This is in the scenario where the previously running Linux changed the
>>> mode to something other than normal and where the freshly booted Linux
>>
On Wed, Aug 27, 2014 at 09:21:02PM +0200, Tomasz Figa wrote:
> On 27.08.2014 21:15, Mark Brown wrote:
> > This is in the scenario where the previously running Linux changed the
> > mode to something other than normal and where the freshly booted Linux
> > can't figure out how to do that when it ne
Hi,
On Wed, Aug 27, 2014 at 11:42:25PM +0530, Vivek Gautam wrote:
> On Wed, Aug 27, 2014 at 1:22 PM, Bartlomiej Zolnierkiewicz
> wrote:
> > dwc3 driver is using the new Exynos5 SoC series USB DRD PHY driver
> > (PHY_EXYNOS5_USBDRD which selects GENERIC_PHY) as can be seen by
> > looking at the fo
Hi,
On Fri, Aug 22, 2014 at 06:59:05PM +0200, Bartlomiej Zolnierkiewicz wrote:
> drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by
> drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung
> USB PHY code is no longer used.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz
> Acked-
Hi,
On Fri, Aug 22, 2014 at 06:59:00PM +0200, Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> This patch series removes the old Samsung USB PHY drivers that
> got replaced by the new ones using the generic PHY layer.
>
> Depends on:
> - v3.17-rc1 branch of Linus' kernel
>
> Changes since v1 (https:/
On 27.08.2014 21:15, Mark Brown wrote:
> On Wed, Aug 27, 2014 at 08:52:49PM +0200, Tomasz Figa wrote:
>> On 27.08.2014 20:47, Mark Brown wrote:
>
>>> I'm not convinced that's worth it - chances are that if anything changed
>>> the mode it was a previously running Linux which will most likely be
>>
On Wed, Aug 27, 2014 at 08:52:49PM +0200, Tomasz Figa wrote:
> On 27.08.2014 20:47, Mark Brown wrote:
> > I'm not convinced that's worth it - chances are that if anything changed
> > the mode it was a previously running Linux which will most likely be
> > doing the same things when it starts runni
On 27.08.2014 20:47, Mark Brown wrote:
> On Wed, Aug 27, 2014 at 08:39:39PM +0200, Tomasz Figa wrote:
>> On 27.08.2014 20:37, Mark Brown wrote:
>
>>> That's essentially the situation the patch is trying to fix - if we boot
>>> and the regulator is off there's no way to figure out what the operatin
On Wed, Aug 27, 2014 at 08:39:39PM +0200, Tomasz Figa wrote:
> On 27.08.2014 20:37, Mark Brown wrote:
> > That's essentially the situation the patch is trying to fix - if we boot
> > and the regulator is off there's no way to figure out what the operating
> > mode would have been so we have to pic
On 27.08.2014 20:37, Mark Brown wrote:
> On Wed, Aug 27, 2014 at 08:32:38PM +0200, Tomasz Figa wrote:
>> On 26.08.2014 13:37, Javier Martinez Canillas wrote:
>
>>> + /*
>>> +* If the regulator is disabled and the system warm rebooted,
>>> +* the hardware reports O
On Wed, Aug 27, 2014 at 08:32:38PM +0200, Tomasz Figa wrote:
> On 26.08.2014 13:37, Javier Martinez Canillas wrote:
> > + /*
> > +* If the regulator is disabled and the system warm rebooted,
> > +* the hardware reports OFF as the regulator operating mode.
> > +
On 26.08.2014 13:37, Javier Martinez Canillas wrote:
> + /*
> + * If the regulator is disabled and the system warm rebooted,
> + * the hardware reports OFF as the regulator operating mode.
> + * Default to operating mode NORMAL in that case.
> +
Hi Baltlomiej,
On Wed, Aug 27, 2014 at 1:22 PM, Bartlomiej Zolnierkiewicz
wrote:
> dwc3 driver is using the new Exynos5 SoC series USB DRD PHY driver
> (PHY_EXYNOS5_USBDRD which selects GENERIC_PHY) as can be seen by
> looking at the following commits:
>
> 7a4cf0fde054 ("ARM: dts: Update DWC3
On Tue, Aug 26, 2014 at 01:37:41PM +0200, Javier Martinez Canillas wrote:
> The max77802 driver reads the default operating mode (opmode)
> set for regulators when enabled from the hardware registers.
Applied, thanks.
signature.asc
Description: Digital signature
Am 27.08.2014 13:02, schrieb Javier Martinez Canillas:
> systemd needs control groups support to be enabled in the
> kernel so let's enable it by default since is quite likely
> that a user-space with systemd will be used.
>
> Signed-off-by: Javier Martinez Canillas
> ---
> arch/arm/configs/exyn
Ulf,
On Wed, Aug 27, 2014 at 4:17 AM, Ulf Hansson wrote:
>> Now, we've got MMC_CAP_NEEDS_POLL, so dw_mmc will periodically be
>> called to check the card detect line, but with vmmc and vqmmc off. It
>> will be unable to return a sensible value without actually turning on
>> vmmc and vqmmc.
>
> C
Jaehoon,
On Tue, Aug 26, 2014 at 9:47 PM, Jaehoon Chung wrote:
> Doug,
>
> On 08/27/2014 01:14 PM, Doug Anderson wrote:
>> Jaehoon,
>>
>> On Tue, Aug 26, 2014 at 8:48 PM, Jaehoon Chung
>> wrote:
>>> Hi, Doug,
>>>
>>> On 08/26/2014 12:25 AM, Doug Anderson wrote:
Jaehoon,
On Mon, A
On Wed, Aug 27, 2014 at 03:48:27PM +0100, Ajay Kumar wrote:
> Add DT nodes for ptn3460 bridge chip and panel.
> Add backlight enable pin and backlight power supply for pwm-backlight.
> Also add bridge phandle needed by dp to enable display on snow.
>
> Note that, snow doesn't support "chunghwa,cla
On Wed, Aug 27, 2014 at 11:42:31AM +0100, Mark Rutland wrote:
> On Wed, Aug 27, 2014 at 10:44:18AM +0100, Naveen Krishna Chatradhi wrote:
> > + cpus {
> > + #address-cells = <2>;
> > + #size-cells = <0>;
> > +
> > + cpu@0 {
> > +
Add DT nodes for ps8622 bridge chip and panel.
Add backlight power supply for pwm-backlight.
Also add bridge phandle needed by dp to enable display on peach_pit.
Note that, peach_pit doesn't support "chunghwa,claa101wb01" panel,
but still we choose to reuse the binding since "chunghwa,claa101wb01"
Add DT nodes for ptn3460 bridge chip and panel.
Add backlight enable pin and backlight power supply for pwm-backlight.
Also add bridge phandle needed by dp to enable display on snow.
Note that, snow doesn't support "chunghwa,claa101wb01" panel,
but still we choose to reuse the binding since "chung
On Wed, Aug 27, 2014 at 12:09:28PM +0100, Mark Rutland wrote:
> On Wed, Aug 27, 2014 at 10:44:20AM +0100, Naveen Krishna Chatradhi wrote:
> > + select HAVE_SMP
>
> I may have missed something, but I didn't see any SMP support in this
> series.
We don't even have HAVE_SMP defined for arm64 (just
Move drm/bridge documentation to video/bridge.
Also, add proper documentation for gpios used by ptn3460.
Signed-off-by: Ajay Kumar
---
.../devicetree/bindings/drm/bridge/ptn3460.txt | 27
.../devicetree/bindings/video/bridge/ptn3460.txt | 27
2
ps8622 eDP-LVDS converter bridge chip is from parade technologies
Signed-off-by: Ajay Kumar
---
.../devicetree/bindings/vendor-prefixes.txt|1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
b/Documentation/devicetree/bindings/ven
Add documentation for DT properties supported by ps8622/ps8625
eDP-LVDS converter.
Signed-off-by: Ajay Kumar
---
.../devicetree/bindings/video/bridge/ps8622.txt| 20
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/ps8
From: Vincent Palatin
This patch adds drm_bridge driver for parade DisplayPort
to LVDS bridge chip.
Signed-off-by: Vincent Palatin
Signed-off-by: Andrew Bresticker
Signed-off-by: Sean Paul
Signed-off-by: Rahul Sharma
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/bridge/Kconfig | 10 +
d
Modify driver to support gpiod interface.
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/bridge/ptn3460.c | 88 --
1 file changed, 36 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
index 1bb4d2
Add drm_panel calls to the driver to make the panel and
bridge work together in tandem.
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/bridge/Kconfig |1 +
drivers/gpu/drm/bridge/ptn3460.c | 37 +
2 files changed, 38 insertions(+)
diff --git a/drivers/
Force bridge connector detection at the end of the bridge attach.
This is needed to detect the bridge connector early.
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/bridge/ptn3460.c |3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridg
Modify driver to support drm_bridge.
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/exynos/Kconfig |1 +
drivers/gpu/drm/exynos/exynos_dp_core.c | 38 +++
drivers/gpu/drm/exynos/exynos_dp_core.h |1 +
3 files changed, 30 insertions(+), 10 deletions(-
A set of helper functions are defined in this patch to make
bridge driver probe independent of the drm flow.
The bridge devices register themselves on a lookup table
when they get probed by calling "drm_bridge_add".
The parent encoder driver waits till the bridge is available
in the lookup table(
Use drm_bridge helpers to modify the driver to support
i2c driver model.
Signed-off-by: Ajay Kumar
---
drivers/gpu/drm/bridge/Kconfig |6 +-
drivers/gpu/drm/bridge/ptn3460.c| 122 +--
drivers/gpu/drm/exynos/Kconfig |2 +-
drivers/gpu
Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.
This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Si
This patch does the following changes:
-- Use usleep_range instead of udelay.
-- Remove driver_private member from ptn3460 structure.
-- Make all possible functions and structures static.
-- Use dev_err for non-DRM errors.
-- Arrange header files alphabetical
This series is based on master branch of Linus tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
I have tested this after adding few DT changes for exynos5250-snow and
exynos5420-peach-pit boards.
The V4 series of this particular patchset was also tested by:
Rahul Sharma
This is a third version of the series that adds support
for the atmel trackpad found on the Exynos5420 Peach Pit.
The first version was [0] but I missunderstood the DT
bindings since I don't have documentation about this hw.
After the feedback provided by Nick Dyer and Yufeng Shen
I think I now und
Many Exynos based Chromebooks have an Atmel trackpad so enable
support for it by default will make easier for users.
Signed-off-by: Javier Martinez Canillas
---
arch/arm/configs/exynos_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/exynos_defconfig
b/arch/arm/con
From: Sjoerd Simons
The Peach Pit board has an Atmel maXTouch trackpad device.
Add the needed Device Tree nodes to support it.
This Device Tree change is based on the Chrome OS 3.8 tree
but adapted to use the mainline Atmel maXTouch DT binding.
Signed-off-by: Sjoerd Simons
[javier.martinez: ad
Some boards with multi platform support (e.g: Exynos based
Chromebooks) have an Atmel trackpad so enable support for
as a module will make easier for users.
Signed-off-by: Javier Martinez Canillas
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/ar
Hello Andreas,
On 08/27/2014 03:11 PM, Andreas Färber wrote:
> Hi Javier,
>>>
>>> + trackpad@4b {
>>> + compatible = "atmel,maxtouch";
>>> + reg = <0x4b>;
>>> + interrupt-parent = <&gpx1>;
>>> + interrupts = <2 IRQ_TYPE_NONE>;
>>> + pinctrl-names
Hi Javier,
Am 27.08.2014 09:13, schrieb Javier Martinez Canillas:
> On 08/27/2014 12:53 AM, Andreas Färber wrote:
>>>
>>> +&hsi2c_8 {
>>> + status = "okay";
>>> + clock-frequency = <333000>;
>>> +
>>> + trackpad@4b {
>>> + compatible="atmel,maxtouch";
>>> + reg=<0x4b>;
On 27.08.2014 11:48, Naveen Krishna Chatradhi wrote:
> This patch adds clock description for MUX, DIV, GATE and PLL
> clocks available in TOPC, TOP0, TOP1, BUS0, BUS1, FSYS0, FSYS1,
> CCORE, PERIC0, PERIC1, PERIS, DISP, G3D, MSCL and MFC blocks.
[snip]
> +Phy clocks:
> +
> +There are several cloc
On Wednesday, August 27, 2014 4:53 PM, Bartlomiej Zolnierkiewicz wrote:
>
> dwc3 driver is using the new Exynos5 SoC series USB DRD PHY driver
> (PHY_EXYNOS5_USBDRD which selects GENERIC_PHY) as can be seen by
> looking at the following commits:
>
> 7a4cf0fde054 ("ARM: dts: Update DWC3 usb cont
On 27.08.2014 11:48, Naveen Krishna Chatradhi wrote:
> By registers bits and offsets the 145xx PLL is similar to
> pll_type "pll_35xx". Also, 1460x PLL is similar to pll_type
> "pll_46xx".
>
> Hence, reusing the functions defined for pll_35xx and pll_46xx
> to support 145xx and 1460x PLLs respecti
On Wed 2014-08-27 12:11:55, Jaehoon Chung wrote:
> Hi,
>
> On 08/26/2014 07:19 PM, Pavel Machek wrote:
> > Hi!
> >
> Would you elaborate?
>
> If I have a device like a phone, I may want to put one "slot" inside
> phone for basic system, and offer second slot for user expansion
Hi Naveen,
On 27.08.2014 11:44, Naveen Krishna Chatradhi wrote:
> This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
> Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
> ARMv8 RISC processor.
A general issue with this series is that it introduces a very generic
name for
Hi Naveen,
Please see my comments inline.
On 27.08.2014 11:44, Naveen Krishna Chatradhi wrote:
> This patch adds initial dts file for the Espresso board
> based on Exynos7 from Samsung.
[snip]
> + mmc@1574 {
Please migrate this dts file to the reference-based syntax.
> + s
Hi Naveen,
Please see my comments inline.
On 27.08.2014 11:44, Naveen Krishna Chatradhi wrote:
> Add initial device tree nodes for EXYNOS7 SoC.
> Also, includes the dt-binding definitions for clock ids.
>
> Signed-off-by: Naveen Krishna Chatradhi
> Cc: Thomas Abraham
> Cc: Rob Herring
> Cc: C
On 27 August 2014 13:17, Ulf Hansson wrote:
> Hi Doug,
>
> [snip]
>
> I think you shall be able use MMC_CAP_NEEDS_POLL, to handle this
> broken card detect mechanism. We even have a DT binding for that,
> "broken-cd".
I don't think this is possible, but let me explain why I t
Hi Doug,
[snip]
I think you shall be able use MMC_CAP_NEEDS_POLL, to handle this
broken card detect mechanism. We even have a DT binding for that,
"broken-cd".
>>>
>>> I don't think this is possible, but let me explain why I think so and
>>> you can correct me.
>>>
>>> The voltage
Hi Naveen,
Please see my comments inline.
On 27.08.2014 11:44, Naveen Krishna Chatradhi wrote:
> Add the required pin configuration support to EXYNOS7
[snip]
> +/ {
> + /* ALIVE block @1058 */
> + pinctrl@1058 {
This syntax repeating the whole hierarchy of nodes in every dts fi
Hi,
On Wed, Aug 27, 2014 at 10:44:20AM +0100, Naveen Krishna Chatradhi wrote:
> From: Alim Akhtar
>
> This patch adds the necessary Kconfig entries to enable
> support for the ARMv8 based Exynos7 SoC.
>
> Signed-off-by: Alim Akhtar
> Signed-off-by: Naveen Krishna Chatradhi
> Cc: Rob Herring
The patch removes redundant checks, redundant HW reads
and simplifies code.
Signed-off-by: Andrzej Hajda
---
v2:
- fixed bit cleaning operation
---
drivers/gpu/drm/exynos/exynos_drm_fimc.c | 64
1 file changed, 15 insertions(+), 49 deletions(-)
diff --git a/driv
On 27 August 2014 16:30, Mark Brown wrote:
> From: Mark Brown
>
> Since this is a platform driver and can be probed at any time we can't
> annotate funtions in the probe path as __init, the code can't safely be
> discarded at the end of kernel init.
>
> Signed-off-by: Mark Brown
> ---
> drivers
systemd needs control groups support to be enabled in the
kernel so let's enable it by default since is quite likely
that a user-space with systemd will be used.
Signed-off-by: Javier Martinez Canillas
---
arch/arm/configs/exynos_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch
systemd needs control groups support to be enabled in the
kernel so let's enable it by default since is quite likely
that a user-space with systemd will be used.
Signed-off-by: Javier Martinez Canillas
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/ar
From: Mark Brown
Since this is a platform driver and can be probed at any time we can't
annotate funtions in the probe path as __init, the code can't safely be
discarded at the end of kernel init.
Signed-off-by: Mark Brown
---
drivers/cpufreq/s5pv210-cpufreq.c | 2 +-
1 file changed, 1 inserti
Hi Naveen,
On Wed, Aug 27, 2014 at 10:44:18AM +0100, Naveen Krishna Chatradhi wrote:
> Add initial device tree nodes for EXYNOS7 SoC.
> Also, includes the dt-binding definitions for clock ids.
Fallout from a rebase? That latter part doesn't seem to be relevant.
> Signed-off-by: Naveen Krishna Ch
On 08/26/2014 07:00 AM, Joonyoung Shim wrote:
> Hi Andrzej,
>
> On 08/22/2014 04:52 PM, Andrzej Hajda wrote:
>> In case of allocation errors some already allocated buffers
>> were not freed. The patch fixes it.
>>
>> Signed-off-by: Andrzej Hajda
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_ipp.c |
Hello All,
On 27 August 2014 15:18, Naveen Krishna Chatradhi wrote:
> This patch factors out the code that can be reused from
> clk-exynos5260.c to clk-samsung/clk.c and clk-samsung/clk.h
>
> As Clock controller in Exynos7 support various blocks in
> CMU. The common functions and structures can b
This patch factors out the code that can be reused from
clk-exynos5260.c to clk-samsung/clk.c and clk-samsung/clk.h
As Clock controller in Exynos7 support various blocks in
CMU. The common functions and structures can be reused to
support Clock controller in Exynos7.
Signed-off-by: Naveen Krishna
By registers bits and offsets the 145xx PLL is similar to
pll_type "pll_35xx". Also, 1460x PLL is similar to pll_type
"pll_46xx".
Hence, reusing the functions defined for pll_35xx and pll_46xx
to support 145xx and 1460x PLLs respectively.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Tomasz Figa
This patch adds driver data for Exynos7
to pinctrl-exynos driver. Exynos7 includes 229 multi-functional
input/output ports. There are 40 general port groups.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Tomasz Figa
Cc: linus.wall...@linaro.org
Cc: Thomas Abraham
---
.../bindings/pinctrl/samsung
Samsung Exynos7 is a ARM64bit processor. Which does not select
the CONFIG_PLAT_SAMSUNG symbol. CONFIG_PINCTRL_SAMSUNG is being
selected for both PLAT_SAMSUNG and ARCH_EXYNOS7 symbols.
This patch modifes the pinctrl/Makefile to use
CONFIG_PINCTRL_SAMSUNG symbol to compile the pinctrl/samsung/*.c
S
This patch adds the needed fields "fixed_factor_clks" and
"nr_fixed_factor_clks" to "struct exynos_cmu_info"
The same fields are used in the function exynos_cmu_register_one()
for registering the fixed factor clocks.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Tomasz Figa
Cc: Mike Turquette
Cc
This patch adds clock description for MUX, DIV, GATE and PLL
clocks available in TOPC, TOP0, TOP1, BUS0, BUS1, FSYS0, FSYS1,
CCORE, PERIC0, PERIC1, PERIS, DISP, G3D, MSCL and MFC blocks.
Adds Gate clocks for UART, HSI2C, SPI, SPDIF, TMU, PWM, WDT,
USB, MMC, RTC and DISP block clocks.
This patch a
From: Alim Akhtar
This patch enables upcoming exynos7 SoCs serial driver.
This also modifies various dependencies for Kconfig
Signed-off-by: Alim Akhtar
Cc: Greg Kroah-Hartman
---
drivers/tty/serial/Kconfig |6 +++---
drivers/tty/serial/samsung.c |2 +-
2 files changed, 4 insertions
Exynos7 SoC has a Watchdog for Atlas (A57) cores
This patch adds support for the Atlas watchdog.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Wim Van Sebroeck
---
.../devicetree/bindings/watchdog/samsung-wdt.txt |1 +
drivers/watchdog/s3c2410_wdt.c | 11 +++
2
The HSI2C module on Exynos7 differs in the transfer status
bits. Transfer status bits were moved to INT_ENABLE and
INT_STATUS registers
This patch adds support for the HSI2C module on Exynos7.
1. Implementes a "hw" field in the variant struct to distinguish
the hardware.
2. Updates the dt-new c
The i2c-exynos5.c driver can be reused for the HSI2C controller
on Exynos7 SoCs from Samsung.
This patch adds the Kconfig dependency to choose i2c-exynos5.c
for CONFIG_ARCH_EXYNOS7.
Signed-off-by: Naveen Krishna Chatradhi
To: linux-...@vger.kernel.org
Cc: Wolfram Sang
---
drivers/i2c/busses/Kc
Add the required pin configuration support to EXYNOS7
using pinctrl interface.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Thomas Abraham
Cc: Rob Herring
Cc: Catalin Marinas
---
arch/arm64/boot/dts/exynos7-pinctrl.dtsi | 691 ++
1 file changed, 691 insertions(+)
This patch adds initial dts file for the Espresso board
based on Exynos7 from Samsung.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Rob Herring
Cc: Catalin Marinas
---
arch/arm64/boot/dts/Makefile |1 +
arch/arm64/boot/dts/exynos7-espresso.dts | 69
From: Alim Akhtar
This patch adds the necessary Kconfig entries to enable
support for the ARMv8 based Exynos7 SoC.
Signed-off-by: Alim Akhtar
Signed-off-by: Naveen Krishna Chatradhi
Cc: Rob Herring
Cc: Catalin Marinas
---
arch/arm64/Kconfig | 17 +
1 file changed, 17 inser
Add initial device tree nodes for EXYNOS7 SoC.
Also, includes the dt-binding definitions for clock ids.
Signed-off-by: Naveen Krishna Chatradhi
Cc: Thomas Abraham
Cc: Rob Herring
Cc: Catalin Marinas
---
arch/arm64/boot/dts/exynos7.dtsi | 553 ++
1 file cha
This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
ARMv8 RISC processor.
This patchset includes the following:
- Support for pinctrl on Exynos7
- Support for clock control on Exynos7 using common clk framework
- DTS and DTS
dwc3 driver is using the new Exynos5 SoC series USB DRD PHY driver
(PHY_EXYNOS5_USBDRD which selects GENERIC_PHY) as can be seen by
looking at the following commits:
7a4cf0fde054 ("ARM: dts: Update DWC3 usb controller to use new
phy driver for exynos5250")
f070267b5fc1 ("ARM: dts: Enable su
On Wed, 2014-08-27 at 04:08 +0200, Andreas Färber wrote:
> Hi,
>
> Am 26.08.2014 09:30, schrieb Sjoerd Simons:
> > I suspect other boards base using exynos5420/5800 might need the similar
> > fixes
> > (Arndale Octa and Samsung SMDK5420) to their dts files, so would be great if
> > folks with tho
On Wed, 2014-08-27 at 03:38 +0200, Andreas Färber wrote:
> Am 26.08.2014 09:30, schrieb Sjoerd Simons:
> > Enable USB gadget support without support for any specific gadgets to
> > more easily catch cases where a devices dts doesn't specify the usb
> > controllers dr_mode while it should.
> >
> >
Hello Andreas,
On 08/27/2014 12:53 AM, Andreas Färber wrote:
>>
>> +&hsi2c_8 {
>> +status = "okay";
>> +clock-frequency = <333000>;
>> +
>> +trackpad@4b {
>> +compatible="atmel,maxtouch";
>> +reg=<0x4b>;
>> +interrupt-parent=<&gpx1>;
>> +
98 matches
Mail list logo
