On Thu, Oct 16, 2014 at 06:48:51PM +0200, Javier Martinez Canillas wrote:
+- maxim,regulator-initial-mode: initial operating mode.
+ This property can only be used on regulators that support changing their
mode
+ during normal operation. These regulators are LDO1, LDO3, LDO20 and LDO21.
Hello Mark,
On 10/17/2014 01:57 PM, Mark Brown wrote:
On Thu, Oct 16, 2014 at 06:48:51PM +0200, Javier Martinez Canillas wrote:
+- maxim,regulator-initial-mode: initial operating mode.
+ This property can only be used on regulators that support changing their
mode
+ during normal
On Fri, Oct 17, 2014 at 02:39:15PM +0200, Javier Martinez Canillas wrote:
Just to be sure I understood correctly, are you suggesting something like
this?
ldo1_reg: LDO1 {
regulator-name = vdd_1v0;
regulator-min-microvolt = 100;
Hello Mark,
On 10/17/2014 03:54 PM, Mark Brown wrote:
On Fri, Oct 17, 2014 at 02:39:15PM +0200, Javier Martinez Canillas wrote:
Just to be sure I understood correctly, are you suggesting something like
this?
ldo1_reg: LDO1 {
regulator-name = vdd_1v0;
Some regulators from the max77802 PMIC support to be configured in one
of two operating mode: Output ON (normal) and Output On Low Power Mode.
Not all regulators support these two modes and for some of them, the
mode can be changed while the system is running in normal operation
while others only
