Some regulators can run on different operating modes (opmodes). This
allows systems to choose the most efficient opmode for each regulator.
This patch builds on top of (291d761 regulator: Document binding for
regulator suspend state for PM state) adding a regulator-initial-mode
DT property to configure at startup the operating mode for regulators
that support changing its mode during normal operation and a property
regulator-mode to be used in the regulator-state-[mem/disk] nodes for
regulators that supports changing its operating mode when the system
enters in a suspend state.
The set of possible modes that a regulator can operate depends on the
hardware capabilities so a list of generic operating modes can't be
provided. Instead, each hardware binding should define the list of
valid operating modes for the regulators found on that device.
Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
---
Changes in v6:
- Remove assumptions about implementation details and don't overspecify.
Suggested by Mark Brown.
Changes in v5: None
Changes in v4: None
Changes in v3:
- Rebased on top of regulator suspend voltage series
Documentation/devicetree/bindings/regulator/regulator.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt
b/Documentation/devicetree/bindings/regulator/regulator.txt
index 4e7ed76..abb26b5 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -30,6 +30,13 @@ Optional properties:
- regulator-off-in-suspend: regulator should be off in suspend state.
- regulator-suspend-microvolt: regulator should be set to this voltage
in suspend.
+ - regulator-mode: operating mode in the given suspend state.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so the valid modes are documented on each regulator
+ device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+ modes depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
