LUN allocation is now fully dynamic, so there is no need to
artificially restrain the number of exported LUNs.
Signed-off-by: Hannes Reinecke
---
drivers/target/target_core_device.c | 9 -
drivers/target/target_core_fabric_configfs.c | 8
drivers/target/target_core_tpg.
As we're now using a list to hold the LUNs the target core
can now converted to use 64-bit LUNs internally.
Signed-off-by: Hannes Reinecke
---
drivers/target/iscsi/iscsi_target_tmr.c | 4 +--
drivers/target/loopback/tcm_loop.c | 4 +--
drivers/target/target_core_alua.c
Hi Nic,
here's now the patchset for making LIO-target support 64-bit LUNs.
Pretty straightforward, plus an additional patch to remove the
now obsolete limitation on 256 LUNs per TPG. There had been a
comment in the header that REPORT LUN emulation would only support
up to one page in payload, but
On Tue, Jun 09, 2015 at 04:53:43PM +0100, Colin King wrote:
> From: Colin Ian King
>
> The printk format specifier string is missing a space between
> the %p format specifier and the "on the defer" text. Minor fix,
> add the missing space.
>
> Signed-off-by: Colin Ian King
> ---
> drivers/scsi
>-Original Message-
>From: Colin King [mailto:colin.k...@canonical.com]
>Sent: Tuesday, June 09, 2015 9:24 PM
>To: Kashyap Desai; Sumit Saxena; Uday Lingala; James E.J. Bottomley;
>megaraidlinux@avagotech.com; linux-scsi@vger.kernel.org
>Cc: linux-ker...@vger.kernel.org
>Subject: [PATCH
From: "Luis R. Rodriguez"
If and when this gets enabled the driver could should split
up IO memory space properly and that is quite a bit of work.
Just remove the uncommented dead MTRR code then.
There are a few motivations for this:
a) Take advantage of PAT when available
b) Help bury MTRR co
SCSI device driver to support filesystem access on the IBM CXL Flash adapter.
Supported-by: Stephen Bates
Reviewed-by: Michael Neuling
Signed-off-by: Matthew R. Ochs
Signed-off-by: Manoj N. Kumar
---
drivers/scsi/Kconfig|1 +
drivers/scsi/Makefile |1 +
drivers/s
This patch adds support for the IBM CXL flash (cxlflash) adapter. The device
is presented to the system as a SCSI adapter and may be accessed and used via
the normal filesystem paths.
Note that the patch is dependent on support that has not yet been merged in
with the mainline. The core cxl change
On Jun 9, 2015, at 1:30 PM, Brian King wrote:
> On 06/09/2015 11:01 AM, Matthew R. Ochs wrote:
>>
>> On Jun 9, 2015, at 9:37 AM, Manoj Kumar wrote:
>>> On 6/9/2015 6:29 AM, Brian King wrote:
>
> This was the optimization to avoid the MMIO for both threads. The other
> thread that rac
On 06/09/2015 11:01 AM, Matthew R. Ochs wrote:
> Brian/Manoj,
>
> See my alternate proposal below.
>
> -matt
>
> On Jun 9, 2015, at 9:37 AM, Manoj Kumar wrote:
>> On 6/9/2015 6:29 AM, Brian King wrote:
This was the optimization to avoid the MMIO for both threads. The other
thread
Add documentation to describe the various scenarios that the scsi_cmnd
may go through in its life time in the mid level driver - aborts,
failures, retries, error handling etc. The documentation has lots of
details including examples.
Signed-off-by: Rajat Jain
---
Hello James / linux-scsi,
Resend
Hello James,
On Tue, May 26, 2015 at 11:15 AM, Rajat Jain wrote:
> Hello James / linux-scsi folks,
>
> On Wed, May 13, 2015 at 12:36 PM, Jonathan Corbet wrote:
>> On Tue, 12 May 2015 14:33:46 -0700
>> Rajat Jain wrote:
>>
>>> Add documentation to describe the various scenarios that the scsi_cmn
Brian/Manoj,
See my alternate proposal below.
-matt
On Jun 9, 2015, at 9:37 AM, Manoj Kumar wrote:
> On 6/9/2015 6:29 AM, Brian King wrote:
>>>
>>> This was the optimization to avoid the MMIO for both threads. The other
>>> thread that raced should
>>> do the atomic set of afu->room to a posit
From: Colin Ian King
The printk format specifier string is missing a space between
the %p format specifier and the "on the defer" text. Minor fix,
add the missing space.
Signed-off-by: Colin Ian King
---
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deleti
On 6/9/2015 6:29 AM, Brian King wrote:
Pulled out going to sleep in the queuecommand path.
udelay doesn't sleep, its a busy wait, so you can still use it in queuecommand,
just don't spend too much time, and its probably better to udelay then to
just re-read in a tight loop.
Thanks for the cl
This patch cleanup existing debugfs. Debugfs support is moved
into to new file in next patch of this series.
Signed-off-by: Praveen Madhavan
---
drivers/scsi/csiostor/csio_init.c | 132 --
drivers/scsi/csiostor/csio_init.h | 4 ++
2 files changed, 4 insertio
This patch adds debugfs support to dump adapter log, adapter queues,
and fcoe DDP stats.
Signed-off-by: Praveen Madhavan
---
drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |1 +
drivers/scsi/csiostor/Makefile |2 +-
drivers/scsi/csiostor/csio_debugfs.c | 1100
This patch series adds debugfs functionality to dump adapter log,
adapter queues and fcoe DDP stats.
This patch has been created against net-next.
Praveen Madhavan (3):
csiostor:Add devlog mailbox support.
csiostor:Cleanup debugfs.
csiostor:Adds debugfs support.
drivers/net/ethernet/chel
This patch adds devlog mailbox support required for
debugfs.
Signed-off-by: Praveen Madhavan
---
drivers/scsi/csiostor/csio_hw.c | 72 +++--
drivers/scsi/csiostor/csio_hw.h | 12 +++
drivers/scsi/csiostor/csio_mb.c | 60 ++
On Tue, Jun 9, 2015 at 12:53 AM, Dov Levenglick wrote:
>> On Sun, Jun 7, 2015 at 10:32 AM, wrote:
2015-06-05 5:53 GMT+09:00 :
[...]
>>> If ufshcd-pltfrm driver is loaded before ufs-qcom, (what actually
>>> happens
>>> always), then the calling to of_platform_populate() which is added,
>>
EXTRA_CFLAGS are intended to be used on the command line, not by
Kbuild. In case of cxgbi drivers, use of EXTRA_CFLAGS results in a
compilation failure:
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:24:21: fatal error: t4_regs.h: No such file
or directory
when building like:
$ make drivers/scsi/cxgbi/ EXTRA_
On 06/08/2015 06:24 PM, Manoj Kumar wrote:
> On 6/8/2015 5:56 PM, Brian King wrote:
>>> +retry:
>>> +newval = atomic64_dec_if_positive(&afu->room);
>>> +if (!newval) {
>>> +do {
>>> +room = readq_be(&afu->host_map->cmd_room);
>>> +atomic64_set(&afu->room, roo
> diff --git a/drivers/target/target_core_tpg.c
> b/drivers/target/target_core_tpg.c
> index 3fbb0d4..aa08d6b 100644
> --- a/drivers/target/target_core_tpg.c
> +++ b/drivers/target/target_core_tpg.c
> @@ -37,6 +37,7 @@
>
> #include
> #include
> +#include
> #include
>
> #include "target
Hi Sathya,
please start your effort per your plans. I don't think we'll need
separate binaries as we should be fine with a MODULE_ALIAS and
registering two misc devices. But compared to the overall effort
that's a fairly minor descision which we can revisit while going ahead.
Keeping the user i
On Thu, Jun 04, 2015 at 12:06:09AM -0700, Nicholas A. Bellinger wrote:
> So I've been using tcm_loop + RAMDISK backends for prototyping, but this
> patch is intended for vhost-scsi so it can avoid the unnecessary
> queue_work() context switch within target_complete_cmd() for all backend
> driver ty
Mam vzajemne mit prospech podnik pro nas oba. pokud mate zajem, muzete mi
dostat na e-mailovou adresu a pro detaily a vysvetlení.
E-mail: jg.ch...@gmail.com
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More major
26 matches
Mail list logo
