From: Xiang Chen <chenxian...@hisilicon.com> After the controller is reset, we currently may not honour the PHY max linkrate set via sysfs, in that after a reset we always revert to max linkrate of 12Gbps, ignoring the value set via sysfs.
This patch modifies to policy to set the programmed PHY linkrate, honouring the max linkrate programmed via sysfs. Signed-off-by: Xiang Chen <chenxian...@hisilicon.com> Signed-off-by: John Garry <john.ga...@huawei.com> --- drivers/scsi/hisi_sas/hisi_sas.h | 1 + drivers/scsi/hisi_sas/hisi_sas_main.c | 16 ++++++++++++++++ drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 31 ++++++++++++++++++------------- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 31 ++++++++++++++++++------------- 4 files changed, 53 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h index 04a40c4..4410538 100644 --- a/drivers/scsi/hisi_sas/hisi_sas.h +++ b/drivers/scsi/hisi_sas/hisi_sas.h @@ -463,4 +463,5 @@ extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, extern bool hisi_sas_notify_phy_event(struct hisi_sas_phy *phy, enum hisi_sas_phy_event event); extern void hisi_sas_release_tasks(struct hisi_hba *hisi_hba); +extern u8 hisi_sas_get_prog_phy_linkrate_mask(enum sas_linkrate max); #endif diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 1f27f84..ff5b8d7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -135,6 +135,22 @@ int hisi_sas_get_ncq_tag(struct sas_task *task, u32 *tag) } EXPORT_SYMBOL_GPL(hisi_sas_get_ncq_tag); +/* + * This function assumes linkrate mask fits in 8 bits, which it + * does for all HW versions supported. + */ +u8 hisi_sas_get_prog_phy_linkrate_mask(enum sas_linkrate max) +{ + u16 rate = 0; + int i; + + max -= SAS_LINK_RATE_1_5_GBPS; + for (i = 0; i <= max; i++) + rate |= 1 << (i * 2); + return rate; +} +EXPORT_SYMBOL_GPL(hisi_sas_get_prog_phy_linkrate_mask); + static struct hisi_hba *dev_to_hisi_hba(struct domain_device *device) { return device->port->ha->lldd_ha; diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 6dda6eb..9e68731 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -1216,7 +1216,22 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba) } for (i = 0; i < hisi_hba->n_phy; i++) { - hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855); + struct hisi_sas_phy *phy = &hisi_hba->phy[i]; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + u32 prog_phy_link_rate = 0x800; + + if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate < + SAS_LINK_RATE_1_5_GBPS)) { + prog_phy_link_rate = 0x855; + } else { + enum sas_linkrate max = sas_phy->phy->maximum_linkrate; + + prog_phy_link_rate = + hisi_sas_get_prog_phy_linkrate_mask(max) | + 0x800; + } + hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, + prog_phy_link_rate); hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, sas_phy_ctrl); hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d); hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0); @@ -1585,13 +1600,10 @@ static enum sas_linkrate phy_get_max_linkrate_v2_hw(void) static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no, struct sas_phy_linkrates *r) { - u32 prog_phy_link_rate = - hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE); struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; struct asd_sas_phy *sas_phy = &phy->sas_phy; - int i; enum sas_linkrate min, max; - u32 rate_mask = 0; + u32 prog_phy_link_rate = 0x800; if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) { max = sas_phy->phy->maximum_linkrate; @@ -1604,14 +1616,7 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no, sas_phy->phy->maximum_linkrate = max; sas_phy->phy->minimum_linkrate = min; - - max -= SAS_LINK_RATE_1_5_GBPS; - - for (i = 0; i <= max; i++) - rate_mask |= 1 << (i * 2); - - prog_phy_link_rate &= ~0xff; - prog_phy_link_rate |= rate_mask; + prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max); disable_phy_v2_hw(hisi_hba, phy_no); msleep(100); diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 5c0d968..ffa3cea 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -429,7 +429,22 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba) hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1); for (i = 0; i < hisi_hba->n_phy; i++) { - hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855); + struct hisi_sas_phy *phy = &hisi_hba->phy[i]; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + u32 prog_phy_link_rate = 0x800; + + if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate < + SAS_LINK_RATE_1_5_GBPS)) { + prog_phy_link_rate = 0x855; + } else { + enum sas_linkrate max = sas_phy->phy->maximum_linkrate; + + prog_phy_link_rate = + hisi_sas_get_prog_phy_linkrate_mask(max) | + 0x800; + } + hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, + prog_phy_link_rate); hisi_sas_phy_write32(hisi_hba, i, SAS_RX_TRAIN_TIMER, 0x13e80); hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff); hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); @@ -1869,13 +1884,10 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba) static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no, struct sas_phy_linkrates *r) { - u32 prog_phy_link_rate = - hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE); struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; struct asd_sas_phy *sas_phy = &phy->sas_phy; - int i; enum sas_linkrate min, max; - u32 rate_mask = 0; + u32 prog_phy_link_rate = 0x800; if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) { max = sas_phy->phy->maximum_linkrate; @@ -1888,14 +1900,7 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no, sas_phy->phy->maximum_linkrate = max; sas_phy->phy->minimum_linkrate = min; - - max -= SAS_LINK_RATE_1_5_GBPS; - - for (i = 0; i <= max; i++) - rate_mask |= 1 << (i * 2); - - prog_phy_link_rate &= ~0xff; - prog_phy_link_rate |= rate_mask; + prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max); disable_phy_v3_hw(hisi_hba, phy_no); msleep(100); -- 1.9.1