[linux-sunxi] allwinner supports

1. Does allwinner have supports for this mailing list?2. What style of supports do you want to get from allwinner? -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[linux-sunxi] Re: [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI

On Thu, 2014-07-24 at 22:54 +0200, Roman Byshko wrote: > Cubietruck has two USB host controllers. This makes them > usable by enabling the EHCI driver for them. Did you not want to enable for the Cubietruck_FEL config too? What about other boards with A20 on them? And does this same driver work f

Re: [linux-sunxi] Our uboot boards.cfg.

Hi, On 07/23/2014 02:39 PM, Luc Verhaegen wrote: > On Wed, Jul 23, 2014 at 10:12:41AM +0200, Hans de Goede wrote: >> Hi, >> >> On 07/23/2014 12:11 AM, Luc Verhaegen wrote: >>> I just had a dig through our boards.cfg, and compared it to our wiki and >>> google. >>> >>> We have 69 unique devices in

Re: [linux-sunxi] conflict gpio-sunxi with gt811_ts

El 24/07/14 a las 08:36, behrooz vosough escibió: hello I am using goodix-gt811 ctp 7 inch and i have not problem to use this module but when i modprobe gpio-sunxi , the interrupt of my ctp disable 1- when gt811_ts is intalled and i modprobe gpio-sunxi ,this message shown on Putty the message is

[linux-sunxi] Re: conflict gpio-sunxi with gt811_ts

i think my script.bin has not any problem. > i uploade this file > script.fex > when load gpio-sunxi and i touch ctp,cat /dev/input/event1 dont return > anything > -- You received this message because you are subscribed to the

[linux-sunxi] Re: conflict gpio-sunxi with gt811_ts

i think my script.bin has not any problem. i uploade this file http://www.mediafire. script.fex when load gpio-sunxi and i touch ctp,cat /dev/input/event1 dont return anything -- You received this message because you are subscribed

[linux-sunxi] Re: [PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

On Fri, Jul 25, 2014 at 06:37:46PM +0200, Maxime Ripard wrote: > > Can you please send follow patches for these: > > - don't recall if I pointed earlier, but can we use direct conversion for > > calculating convert_burst() and convert_buswidth(), latter one at least > > seem doable > > Ok. Do

[linux-sunxi] Re: [PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

On Fri, Jul 25, 2014 at 06:37:46PM +0200, Maxime Ripard wrote: > Hi Vinod, > > On Fri, Jul 25, 2014 at 06:42:17PM +0530, Vinod Koul wrote: > > - don't use devm_request_irq(). You have irq enabled and you have killed > > tasklet. This is too racy. You need to ensure no irqs can be generated > >

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Friday, July 25, 2014 at 06:06:45 PM, Ian Campbell wrote: > On Fri, 2014-07-25 at 17:41 +0200, Marek Vasut wrote: > > On Friday, July 25, 2014 at 05:38:20 PM, Ian Campbell wrote: > > > On Fri, 2014-07-25 at 17:01 +0200, Marek Vasut wrote: > > > > On Thursday, July 24, 2014 at 10:54:21 PM, Roman

[linux-sunxi] Re: [PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

Hi Vinod, On Fri, Jul 25, 2014 at 06:42:17PM +0530, Vinod Koul wrote: > On Thu, Jul 17, 2014 at 09:46:14PM +0200, Maxime Ripard wrote: > > Hi, > > > > This patchset adds support for the DMA controller found in the > > Allwinner A31 and A23 SoCs. > > > > This has been tested using the newly intro

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Fri, 2014-07-25 at 18:31 +0200, Marek Vasut wrote: > On Friday, July 25, 2014 at 06:06:45 PM, Ian Campbell wrote: > > On Fri, 2014-07-25 at 17:41 +0200, Marek Vasut wrote: > > > On Friday, July 25, 2014 at 05:38:20 PM, Ian Campbell wrote: > > > > On Fri, 2014-07-25 at 17:01 +0200, Marek Vasut wr

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Fri, 2014-07-25 at 17:41 +0200, Marek Vasut wrote: > On Friday, July 25, 2014 at 05:38:20 PM, Ian Campbell wrote: > > On Fri, 2014-07-25 at 17:01 +0200, Marek Vasut wrote: > > > On Thursday, July 24, 2014 at 10:54:21 PM, Roman Byshko wrote: > > > > The Allwinner aka sunxi SoCs have one or more U

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Friday, July 25, 2014 at 05:38:20 PM, Ian Campbell wrote: > On Fri, 2014-07-25 at 17:01 +0200, Marek Vasut wrote: > > On Thursday, July 24, 2014 at 10:54:21 PM, Roman Byshko wrote: > > > The Allwinner aka sunxi SoCs have one or more USB host controllers. > > > This adds a driver for their EHCI.

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Fri, 2014-07-25 at 17:01 +0200, Marek Vasut wrote: > On Thursday, July 24, 2014 at 10:54:21 PM, Roman Byshko wrote: > > The Allwinner aka sunxi SoCs have one or more USB host controllers. > > This adds a driver for their EHCI. > > > > Signed-off-by: Roman Byshko > > Did you verify the patches

[linux-sunxi] Re: [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver

On Thursday, July 24, 2014 at 10:54:21 PM, Roman Byshko wrote: > The Allwinner aka sunxi SoCs have one or more USB host controllers. > This adds a driver for their EHCI. > > Signed-off-by: Roman Byshko Did you verify the patches to be checkpatch clean please ? Also, they don't apply to u-boot-u

Re: [linux-sunxi] conflict gpio-sunxi with gt811_ts

hi my problem solved when use modprobe after booting system,modules have problem but when i add gt811_ts and gpio-sunxi to /etc/module the problem solved -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop r

[linux-sunxi] Re: conflict gpio-sunxi with gt811_ts

hi my problem solved i add gt811_ts and gpio-sunxi to /etc/module when use modprobe after booting system,modules have problem but when i add gt811_ts and gpio-sunxi to /etc/module the problem solved -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group

[linux-sunxi] Re: [PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

On Thu, Jul 17, 2014 at 09:46:14PM +0200, Maxime Ripard wrote: > Hi, > > This patchset adds support for the DMA controller found in the > Allwinner A31 and A23 SoCs. > > This has been tested using the newly introduced SPI driver on an A31 > EVK. Support for DMA-driven SPI transfers will be the su

Re: [linux-sunxi] nand & sunxi-nand

oops.. forgot to mention this is for the sunxi-3.4 branch. But I think the newer ones don't have any sunxi-nand content yet. On Fri, Jul 25, 2014 at 9:14 AM, Tim Tisdall wrote: > From cdc41a44c4fad7626b6e65939e009acf80fd154a Mon Sep 17 00:00:00 2001 > From: Tim Tisdall > Date: Wed, 23 Jul 20

Re: [linux-sunxi] nand & sunxi-nand

>From cdc41a44c4fad7626b6e65939e009acf80fd154a Mon Sep 17 00:00:00 2001 From: Tim Tisdall Date: Wed, 23 Jul 2014 10:35:24 -0400 Subject: [PATCH] rename to sunxi_nand to avoid naming conflict rename to sunxi_nand to avoid conflict with drivers/mtd/nand/nand.ko --- drivers/block/sunxi_nand/nfd/Mak

Re: [linux-sunxi] Re: Experimenting with eu3000 board

Still does not work. It seems that the lots of "[CSI_ERR]v4l2 sub device queryctrl error!" errors coming from a function discovery? have no idea I try to capture with streamer: root@A20:~# streamer -c /dev/video1 -f rgb24 -r 15 -t 00:00:02 -o test.avi avi / video: 24 bit TrueColor (LE: bgr) / audi

[linux-sunxi] Re: [PATCH v3 1/6] rtc: sun6i: Add sun6i RTC driver

On 07/25/2014 02:43 PM, Chen-Yu Tsai wrote: This patch introduces the driver for the RTC in the Allwinner A31 and A23 SoCs. Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the RTC in A31/A23 are a separate hardware block, which also contain a few controls for the RTC block har

[linux-sunxi] [PATCH v3 0/6] ARM: sunxi: RTC support for A31/A23

Hi everyone, This is v3 of the sun6i RTC series. This series adds support for the RTC in A31 and A23 SoCs. The series applies to sunxi-next. The A31 has a new RTC block that is separate from the timer block. It has separate interrupts for each of the alarms, and a different format for the counter

[linux-sunxi] [PATCH v3 6/6] ARM: sunxi: Add A31 RTC driver to multi_v7_defconfig

Now that we have a driver for A31's RTC, enable it in multi_v7_defconfig. Signed-off-by: Chen-Yu Tsai --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index a62ca27..130dd8d 1006

[linux-sunxi] [PATCH v3 5/6] ARM: sunxi: Add A31 RTC driver to sunxi_defconfig

Now that we have a driver for A31's RTC, enable it in the default sunxi config. Signed-off-by: Chen-Yu Tsai --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 7209bfd..0abc2ab 100644 -

[linux-sunxi] [PATCH v3 2/6] rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc

Now that we have Kconfig options for individual sunxi platforms, let the rtc-sunxi driver depend on the platforms that actually have this hardware, sun4i and sun7i. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- drivers/rtc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

[linux-sunxi] [PATCH v3 4/6] ARM: dts: sun8i: add rtc device node

sun8i shares the same rtc hardware as sun6i. Now that we have a driver for it, add a device node to the DTSI for it so we can use it. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a23.dtsi | 6 ++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch

[linux-sunxi] [PATCH v3 1/6] rtc: sun6i: Add sun6i RTC driver

This patch introduces the driver for the RTC in the Allwinner A31 and A23 SoCs. Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the RTC in A31/A23 are a separate hardware block, which also contain a few controls for the RTC block hardware (a regulator and RTC block GPIO pin latc

[linux-sunxi] [PATCH v3 3/6] ARM: dts: sun6i: add rtc device node

Now that we have a driver for sun6i's rtc hardware, add a device node for it so we can use it. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun6i-a31.dtsi | 6 ++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b0

Re: [linux-sunxi] conflict gpio-sunxi with gt811_ts

tor 2014-07-24 klockan 04:36 -0700 skrev behrooz vosough: > hello > I am using goodix-gt811 ctp 7 inch and i have not problem to use this > module but when i modprobe gpio-sunxi , the interrupt of my ctp > disable This is likely an issue in your script.bin, at least partially. Regards Henrik --

[linux-sunxi] Re: [PATCH v2 1/6] rtc: sun6i: Add sun6i RTC driver

On Fri, Jul 25, 2014 at 3:57 PM, Chen-Yu Tsai wrote: > On Thu, Jul 24, 2014 at 12:02 AM, Varka Bhadram > wrote: >> >> On Wednesday 23 July 2014 08:08 PM, Chen-Yu Tsai wrote: >>> >>> This patch introduces the driver for the RTC in the Allwinner A31 and >>> A23 SoCs. >>> >>> Unlike the RTC found i

[linux-sunxi] Re: [PATCH v2 1/6] rtc: sun6i: Add sun6i RTC driver

On Thu, Jul 24, 2014 at 12:02 AM, Varka Bhadram wrote: > > On Wednesday 23 July 2014 08:08 PM, Chen-Yu Tsai wrote: >> >> This patch introduces the driver for the RTC in the Allwinner A31 and >> A23 SoCs. >> >> Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the >> RTC in A31/A23

[linux-sunxi] Re: [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'

On Fri, 2014-07-25 at 07:26 +0300, Siarhei Siamashka wrote: > > > + number_of_lanes = mctl_get_number_of_lanes(); > > > > There is a subtle functional change here since number_of_lanes can be 1 > > whereas n could never have been 2. Is that intended/ok? Please mention > > in the commit message. >

[linux-sunxi] Re: [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)

On Fri, 2014-07-25 at 07:00 +0300, Siarhei Siamashka wrote: > On Mon, 21 Jul 2014 20:31:30 +0100 > Ian Campbell wrote: > > > On Fri, 2014-07-18 at 19:22 +0300, Siarhei Siamashka wrote: > > > The sun5i hardware (Allwinner A13) introduced configurable MBUS clock > > > speed. > > > Allwinner A13 us

Re: [linux-sunxi] Re: [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration

On Fri, 2014-07-25 at 06:44 +0300, Siarhei Siamashka wrote: > > I'd also steer clear of describing this as a code cleanup when it > > also has functional changes. > > The 'cleanup' was just a bad choice of word. It is a reimplementation. Right, I think that's the crux of all issues raised (hence

[linux-sunxi] Re: [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling

On Fri, 2014-07-25 at 04:41 +0300, Siarhei Siamashka wrote: > On Mon, 21 Jul 2014 19:51:50 +0100 > Ian Campbell wrote: > > > On Fri, 2014-07-18 at 19:22 +0300, Siarhei Siamashka wrote: > > > Before driving the CKE pin (Clock Enable) high, the DDR3 spec requires > > > to wait for additional 500 us

[linux-sunxi] Re: [PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

On Fri, 25 Jul 2014 11:43:20 +0530 Vinod Koul wrote: > On Fri, Jul 25, 2014 at 11:41:30AM +0530, Vinod Koul wrote: > > On Thu, Jul 24, 2014 at 04:44:20PM -0700, Andrew Morton wrote: > > > On Thu, 24 Jul 2014 14:13:15 +0200 Maxime Ripard > > > wrote: > > > > > > > On Thu, Jul 17, 2014 at 09:46: