On Tue, Feb 13, 2018 at 9:25 AM, Philipp Rossak wrote:
>
>
> On 12.02.2018 19:21, Philipp Rossak wrote:
>>
>> Hey,
>>
>> When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
>> kernel ... . After enabling the earlyprintk I could capture this log: [1].
>>
>> After reverting thos
On Tue, Feb 13, 2018 at 5:07 AM, Philipp Rossak wrote:
> This patch fixes a bug, that prevents the Allwinner A83T and the A80
> from a successful boot. You can find the shortend trace below:
>
> Unable to handle kernel NULL pointer dereference at virtual address
>
> pgd = (ptrval)
> [
On 12.02.2018 19:21, Philipp Rossak wrote:
Hey,
When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
kernel ... . After enabling the earlyprintk I could capture this log: [1].
After reverting those 5 commits from Chen-Yu I was able to boot again:
clk: sunxi-ng: Support
Hi,
On 03/02/18 15:49, Icenowy Zheng wrote:
> The Allwinner H6 SoC has two pin controllers, one main controller
> (called CPUX-PORT in user manual) and one controller in CPUs power
> domain (called CPUS-PORT in user manual).
Leaving aside that I don't like this approach of stashing yet another
pi
This patch fixes a bug, that prevents the Allwinner A83T and the A80
from a successful boot. You can find the shortend trace below:
Unable to handle kernel NULL pointer dereference at virtual address
pgd = (ptrval)
[] *pgd=
Internal error: Oops: 5 [#1] SMP ARM
Modules link
Hi Icenowy,
Thank you for your reply!
I worked much and got this close, so I really want to make this thing work
:)
Do you have any suggestions/patches/directions? This "ugly hack" is there
somewhere? :)
I think the issue resides on the "switching" to the next cpu...
Thank you in advance!
Al
Hey,
When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
kernel ... . After enabling the earlyprintk I could capture this log: [1].
After reverting those 5 commits from Chen-Yu I was able to boot again:
clk: sunxi-ng: Support fixed post-dividers on NM style clocks
7d333e
The mmc1_pins node with bias-pull-up attribute is already defined in
the sunxi-h3-h5.dtsi file. Thus, we can remove it from here.
Signed-off-by: Joonas Kylmälä
---
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 4
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h2-
Hi Maxime,
I made now the patch removing the unnecessary mmc1_pins node as discussed in
the email thread "ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a".
Joonas
Joonas Kylmälä (1):
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
arch/arm/boot/dts/sun8i-h2-plus-orange
On 30.01.2018 18:46, Philipp Rossak wrote:
This patch series adds support for the sunxi A83T ir module and enhances
the sunxi-ir driver. Right now the base clock frequency for the ir driver
is a hard coded define and is set to 8 MHz.
This works for the most common ir receivers. On the Sinovoip B
On Sun, Feb 11, 2018 at 10:43 AM, Philipp Rossak wrote:
> Hey,
>
> When I boot my A83T I get the following bootlog [1].
>
> After some debugging, I found out that the function call:
> clk_hw_get_num_parents() returns 2. After a look in the devicetree I
> found out that this value should be 1, sinc
11 matches
Mail list logo