November 24 2015 9:43 AM, "Maxime Ripard"
wrote:
> On Mon, Nov 23, 2015 at 09:02:50AM +0100, Josef Gajdusek wrote:
>
>> This patch adds support for the Sunxi thermal sensor on the Allwinner H3.
>
> You can drop the sunxi here.
>
>> Should be easily ex
;magical constants": what I meant is that altough the datasheet explains
what they are, it does not explain how to pick their values. "ADC" and "Sensor"
"acquire time" are also not exactly the most helpful descriptions.
Anyway, I changed the values such as the final sam
This patch adds the binding documentation for the sun8i_ths driver
Signed-off-by: Josef Gajdusek
---
.../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff
Add a node describing the Security ID memory to the
Allwinner H3 .dtsi file.
Signed-off-by: Josef Gajdusek
---
arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 0faa38a..58de718
This patch adds a driver for the THS clock which is present on the
Allwinner H3.
Signed-off-by: Josef Gajdusek
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/Makefile| 1 +
drivers/clk/sunxi/clk-h3-ths.c| 98
This patch adds nodes for the THS driver and the THS clock to the Allwinner
H3 .dtsi file.
Signed-off-by: Josef Gajdusek
---
arch/arm/boot/dts/sun8i-h3.dtsi | 33 +
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts
This patch adds support for the Sunxi thermal sensor on the Allwinner H3.
Should be easily extendable for the A33/A83T/... as they have similar but
not completely identical sensors.
Signed-off-by: Josef Gajdusek
---
drivers/thermal/Kconfig | 7 +
drivers/thermal/Makefile| 1
/A83T/... as they have similar but
not completely identical sensors.
Signed-off-by: Josef Gajdusek
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
.../devicetree/bindings/thermal/sunxi-ths.txt | 24 ++
arch/arm/boot/dts/sun8i-h3.dtsi| 27 +++
drivers/clk
Hi everyone,
I might be missing something, but why is the PL* GPIO bank not declared here?
Dne středa 21. října 2015 18:30:50 UTC+2 Jens Kuske napsal(a):
> The H3 uses the same pin controller as previous SoC's from Allwinner.
> Add support for the pins controlled by the main PIO controller.
>
>
Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,
has most of the A10 pins on a .1" header, 2 USB ports, 1 OTG USB port,
Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot.
Signed-off-by: Josef Gajdusek
---
It does not look like there ar
s_A10/A20
Signed-off-by: Josef Gajdusek
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun4i-a10-iteaduino-plus.dts | 202 +
2 files changed, 203 insertions(+)
create mode 100644 arch/arm/boot/dts/sun4i-a10-iteaduino-plus.dts
diff --git a
11 matches
Mail list logo