The LinkSprite pcDuino v3 Nano's two USB host ports are powered by a
single RT9701GB regulator, which has its enable input tied to the A20's
PD2 pin, pulled up to 3v3 via a 10k resistor.
However, the script.bin that shipped with the device listed PH11 and PH3
as Vbus control pins for the two USB p
Hi,
On Sat, Oct 10, 2015 at 9:47 AM, Adam Sampson wrote:
> The LinkSprite pcDuino v3 Nano's two USB host ports are powered by a
> single RT9701GB regulator, which has its enable input tied to the A20's
> PD2 pin, pulled up to 3v3 via a 10k resistor.
>
> However, the script.bin that shipped with t
Chen-Yu Tsai writes:
> Since Siarhei spotted the issue, maybe add a Reported-by tag where credit
> is due?
Will do.
>> ®_ahci_5v {
>> + pinctrl-names = "default";
[twice]
>
> This is already in sunxi-common-regulators.dtsi.
> No need to add it again.
OK -- fixed. v2 incoming.
Thanks,